rover

bugger

when you going to the willowbank again?

last time i got done for speeding a had just passed a truck and went round a corner then a cop was comming the other way and got me. cop....why were you speeding? me....i wasn't speeding! cop...you were doing 126 in a 100 me...i was slowing down cop..GET OUT OF THE CAR me....lerned lesson fast....

i had it dyno'd at chip torque by Lachlan Riddel (the owner) so ring them and ask him. btw, what did you get atw's?

not enough!!! it was only 4rwkw's, the total cost of the tt/b's was $200 plus dyno tune. so about 400 all up! i really need to piss off the standard airflow meter! i was thinking...hole in the bonnet, round air filter, bonnet scoop. BTW......for those that dyno there car in 3rd gear, i made 108rwkw's in 4th and 128rwkw's in 3rd.....

went to willowbank and only got one run in. there was a huge storm and the event was cancelled. heaps of wheel spin and ran a 15.3. got it tuned at chiptorque, not a lot more power, a little more topend. the single afm is the holdup, once i get enough $$$ i'll install a mircotech. with this setup as is i should be able to run quicker than 14.8, but with the tt/b's i have lost some bottom end power so i'll need to change diff gears....maybe next time i go out to the track i'll put on some 14's and run standard rear suspension, should help the traction probs.

well i went for the twin 52mm throttle bodys. it goes better now. it goes on the dyno on the 23 show i'll post the results then. also i think test-n-tune is on the 24th so i'll be there too....

the cam is a SURECAM (btw surecam make all the cams for chiptorque, and for the rb30 hp1,hp2,hp3 it's the same cam) headwork was also done by surecam. double springs, lifter boxes machined, port-n-polish. 104rwkw's on the chiptorque dyno, power comes on strong 2500-7000

i have an rb30 commodore with 104rwkw's best time of 14.8. it has headwork,cam,chip,cai,zorst,lsd what else can i do to make it go faster? without turbo or n2o!

i have a rb30 vl commodore with 104rwkw's with best time of 14.8 it has head work, cam,chip,zorst.... and i was wondering what else i can do to make it quicker? without n2o or turbo!

more pics of the chicks please

wat gear was it done in? looks like second.

i have a rb30 vl that has 106rwkw's. the head flow's 264hp. i dont know of any rb30de power figure's. i think its a waste of money. just remember the top ten fastest turbo rb30's are single cam......

hey guys. i have a vl n/a 5speed with a smallish cam. the best time so far is 15.02 @ 148kph this was done with two wheels, trolly jack, and a tool box in the boot. i didnt have a traction problem. lsd. skyla.......i'm wondering how you have traction problems. wat size tires and diff do u have?

does ne1 know where to get a rb30 cam for a n/a rb30. i'm in queensland

WHERE/WHO can i ring to get a cam for a rb30 n/a vl commodore? i'm in queensland.