GTR STI

I'm been living in the Philippines for the last 4 years...all my gear for the GTR is in storage in Brisbane and AtomicBomberMan Chris Wong is handleing inquires for parts and should be able to send u Pictures. The Radiator is in excellent condition and has seen very little use from new...there was absolutlly not fin damage etc and even has an ARC cap and from memory my plastic GTR shroud is fitted to it....$900 is dirt cheap for the item and is not negotiable I know u are only after the complete Greddy intake kit......I have a new complete Trust Greddy TD05 and or TD06 SL2 turbine kit approx. 76 parts to this complete kit...came in 3 boxes...the intake is only one section to the kit...the only thing I did from new is had the exhaust manilof ceramic coated which cost me over 1K to get done...whole kit never installed....8k

I have a 50mm ARC Radiator to suit GTR in excellent condition...been in storage for years...Brisbane $900

I have a set of Rays Volk 19X10.5 +22 Progre-S they have been sitting in storage for years and are no longer required $2000

I have APracing 6 pot front and 4 pot rears with carbon or steel rotors also have Greddy 6 pot fronts with rotors

I have GTR group "A" diff gears front and rear as an option for u....they are the same as what was used in the MINES R34 GTR and are 4.6 ratio...half the reason why that car hauled ass. 4k

I have a new and never used Hi Octane sump...with new Quaife helical centre and Group "A" 4.6 diff gears professional fitted. From memory the sump cost me 2200 the diff was also 2200 and the front and rear gears cost 4000. and when I say new and never used...it was bolted to the engine...but the engine has never been installed or run...other peoples interpretation of new and never used will be different....hahahaha...it is what it is and as I have described PM me if u are interested in going all hog.

I have complete Greddy THRUST TD05's with the option to go to larger TD06 SL2's kit from aircleaners to dumps 76 odd parts to this complete kit still in original boxes...never installed....had the Hi-mount manifold ceramic coated which cost a grand...8k for the kit

Reply to my PM's

When are u going to read your PM's...reply

ITS LIKE TALKING TO A PIECE OF WOOD...I CAN SAY WHATEVER I LIKE, BUT NOTHING WILL EVER BE UNDERSTOOD BY U....LOL But just so others reading your comments can have a laugh too... YES MOST OF US DRIVE IMPORTS....HAHAHAHA....really...a simple explanation just for you...there is a mile of difference between buying from an international EBAY seller and judging from your attitude and comments, your business for that matter, than from a reputable firm, manufacturer or business. I KNOW OTHERS UNDERSTAND. U have done your business a lot of justice...keep running off at the mouth as much as u like....I will not waste any more of my time on a fool like u. Sorry "Buddy" just accept this as a BUMP and a bonus your tread is hot for a laugh....hope u find what u need. cheers Phil Others reading this can learn from the comments we made....at least that's an achievement

You keep flaming me and need to read my original tread and how this started...u should apologize, but u are the type regardless of fact will never say U were wrong....lol Another fact...u don't know how to use RHD's site...try changing the currency within their site to Australian AUD it is now $2029.39 plus u will have to wait and pay delivery cost, taxes etc for a very large box. but more importantly quoting ebay prices on a well used one off R33 headlight (len scratched with paint pealing) from an international person from KL who is shipping to US and Canada at a cost and Australia is excluded from that shipping price...you keep making me laugh, they don't compare (even in price after shipping etc) and its obvious to me that u haven't been ripped off enough to realize that international Ebay purchases are not the way to go for many reasons....u shouldn't rely on EBAY as your place to purchase. Very happy to put whatever 2 lights u come up with...at whatever price u eventually pay and put them next to my 2, which are still in their original boxes and I will guaranty you will be disappointed with your over priced items....even if I was selling my lights alone at $2000 (and by the way 2K is just a figure, the deal was bar and lights at 3k) they would be cheaper than your one of at a time purchases, if you ever receive them from the seller? It would be better if u took advice about international ebay purchases than to be disappointed in getting burned. just stop making the ill informed comments...I put forward the NISMO 400R as an option....very simple...whether it was suitable or not, u put forward an option which I didn't Flame

http://www.rhdjapan....line-gt-r-50566 Your a strange one mungy...one minute u are questioning whether the Bar is genuine or not...then u are quoting a new one at $1900....then u are posting the RHD site which has it on special before delivery to Australia at $2039! Yes....It's on special at the moment at RHD in Japan for just over $2039, but you will have to wait build time and would have to pay for shipping, Duties and taxes when it arrived in Australia and hope it doesn't get damaged.....the one I have is better than new....prepped and never been on the car and it's currently in Brisbane in the large NISMO box....yes the items are secondhand, I've been oversea for nearly 4 years now and all my parts have been in storage. On top of the Bar thing...I know for a fact u cannot purchase genuine series 3 R33 GTR headlight complete with ballast etc and still sealed in the box, for only $1200...care to send me a PM as to where u think u can get them or are they in Japan as well?????? $3000 here in Australia is very cheap for both items cheers Phillip

I have the higher pressure twin ATS carbon near new

I have a near new ATS carbon twin plate...higher pressure one

Didn't see this till now....didn't receive notification. Its Genuine. The pictures were taken when it was being prepped for paint....look at pictures closely. refer add from previous owner http://www.skylinesaustralia.com/forums/topic/250966-genuine-nismo-400r-r33-gtr-front-bar/ Had a deal going with one of the guys on here...The Bar plus new set of Genuine Xenon lights for R33 GTR...$3000....cheap buy for him...but he never replied...maybe due to your uninformed comment on this tread because I have not advertised it for sale yet! But no drama...a question is a question cheers Phillip

upgraded box "OS Giken 5-speed gear set with uprated input shaft" Never been put in the car since JUST JAP upgraded and rebuilt the box. $6000

I have a new in the boxes GREDDY twin Kit...something like 76 parts to their kit including the Air filters...the buyer can have the choice of using Greddy TD05's or TD06's. The new manifold was removed from the kit to have it ceramic coated...that alone cost me a thousand cheers Phil [email protected]

I have new HYPERTUNE manifold and 90mm throttle body plus their 19mm fuel rail Also have a set of RAYS VOLK 19x10.5 +22 Progre-S Rims in as new condition cheers Phillip [email protected]

Have new in the boxes APEXI SPL 2.9 stoker kit...full counter SPL billet Crank, SPL H-beam rods 22mm small end, 88mm SPL pistons to suit. ATI balancer Twin plate carbon clutch/flywheel

How about a pair of APS SR-30 turbos

How about a genuine NISMO 400R Front bar

I have a never installed R34 racing Engine built by JHH Engineering in Brisbane and too many other parts to mention here. Another guy here is also after an R34 engine...I gave details there please follow post for description and pictures. Anyway its now proabably the post below this now anyway http://www.skylinesaustralia.com/forums/topic/424170-wtb-rb26dett-engine-r34/ [email protected]

I have as an option a genuine 400R NISMO

read my PM and ur other post for N1 block and stroker kit Race Engine by JHH Engineering...N1 with full counter crank etc has everything details in ur other post by the way the instated aftermarket Cams and CAS which is not in the pic is to suit an R34 Hypertune intake, throttle body fuel rail are also not in picture Ceramic coated low mounts are in picture, but at the same time I had the Manifold art of the twin high mount Greddy..ceramic coated at the same time [email protected]

Hi...I now live in the Philippines, Manila A friend of mine in Brisbane ATOMICBOMERMAN....Chris Wong 0417755890 is going to help me sell off my gear for GTR's etc The gear is in storage in Brisbane Please make a list and contact him. New N1 block in box APEXI SPL 2.9 full counter stroker kit a Complete N1 block race Engine Built by JHH Engineering in Brisbane with full counter Bottom end...block modified to suit raceing...top and btm stud kits. Heads fully ported and flowed...both intake and exhaust valves are oversized...bronze guides etc...TOMMEI oil pump, cm gears etc...HI Octane sump, Quaffi diff, 4.6 group A diff gears...Hypertune intake, throttle body, fuel rail....list goes on...they have pictures on their Facebook site of the Engine etc OS Giken gearbox....5 speed with shaft...rebuilt late model box...never used Numerous turbo kits...even a new Greddy TD06 or TD05 full twin kit, 70 plus parts to this complete kit...manilod was ceramic coated. I have twin low mount kit too and there is a single as well Have ARC twin entry intercooler...ARC radiater... Rims...twin carbon clutch...APracing and Greddy brake kits....whatever u are after it will be there Ti exhaust for 33...more and more [email protected]