Equinox

Emptied. My apologies.

Complete bolt on R32 GTR Brake upgrade for S13/S14/S15/R32/R33/C34. 296x32mm rotor with calipers which I rebuilt 1500km ago with genuine Nissan seals. Held up fine at Winton and Sandown with 230rwkw behind them on semi-slicks. The best bang-for-buck brake upgrade you'll find. Rotors are near-new (~31.7mm) slotted RDAs and ADR-approved braided brake lines. Come with a set of Project Mu MAX900i racing pads with ~70% left. Cost $300 just for the pads. $500ono for the lot. PM me or SMS 0423 eight-hundred 325.

Complete bolt on R32 GTR Brake upgrade for Series 1 WGNC34. 296x32mm rotor with calipers which I rebuilt 1500km ago with genuine Nissan seals. Held up fine at Winton and Sandown with 230kw behind them on semi-slicks. The best bang-for-buck brake upgrade you'll find. Rotors are near-new (~31.7mm) slotted RDAs and ADR-approved braided brake lines. Come with a set of Project Mu MAX900i racing pads with ~70% left. Cost $300 just for the pads. $500ono for the lot. PM me or SMS 0423 eight-hundred 325.

They are the standard 20 hex nuts for racing. I'm located in Glen Waverley, VIC.

I have two sets of these that I was going to use on my cars but have decided against it. They're brand new Project KICS R40 Racing Composite Wheel Nuts in Neochro Titanium Color. They are an awesome racing nut as they are comprised of a unique combination of materials. The thread of the nut is an alloy steel and is therefore strong and wont strip (Like the cheap aluminium wheel nuts do) however the boss which interfaces with the rim is aluminium as to significantly reduce the likelihood of rim damage. The result is a light, strong and safe nut. I have a set in M12x1.50 (part number RC01N) to suit most Hondas, Toyotas, Mazdas, Mitsubishis, etc and I also have a set in M12x1.25 (part number RC03N) which suits most Nissans. Price from the Aussie distributor is over $300. Asking $220ono for either set including shipping to any city in Australia. PM or SMS me on 0423800325. Located in Glen Waverley, VIC. Pics:

Price drop. $2500ono.

Hey mate sorry no I already have new brakes.

PM or Call/SMS me on 0423800325.

Selling a genuine Trust GREX Alcon Front Brake Kit for S13/S14/S15/R32(GTR)/R33(GTR). It's a real Alcon GREX kit, not the cheap new GReddy kits which are simply rebadged no-name parts. It's a complete kit and includes: - Trust GREX Alcon 4-Pot Front Calipers - Trust GREX 330mm Slotted 2-Piece Floating Rotors (Have done two track days and had a quick skim) - Adapter Brackets - Braided Brake Lines (Somewhat corroded; could do with some new fittings) - All mounting hardware. - Pagid RS 4-2 Brake Pads (90%) The near-new brake pads it comes with are the famous Pagid RS 4-2 'Blue' pads. These will actually stop you at the track; unlike the majority of pads new GReddy and PMU kits come with. (See: http://bit.ly/WyPQTQ) These are very rare and quite expensive. New they were over $6,000 as you can see in the Greenline.jp screenshot. I am selling as they are simply too big for what I do; and I am not doing them justice. Asking $2,900ono. Can post anywhere in Australia for an extra $95. Any questions and inspections are welcome.

Have a set of these I was meaning to fit to an S13 but we have decided its going to be too difficult so they are up for sale. They are all 18x10.5+18. They would suit a GTR perfectly or a Silvia with some guard modification. In my opinion they are in good all round condition considering their age. No buckles or significant scratches. There is very light gutter rash on one of them and a picture of said rash is attached. They're $4000 new in Japan not including shipping plus on top of that there is a wait time to have them made. Asking $3200ono. Rims are located in Eastern Melbourne and pickup is preferred however if you are really keen you can organise your own courier. Contact Jason 0413119735 Or PM.

Yes. They're more than $300 normally locally. Make an offer if you think they're worth less.

I have two sets of these that I was going to use on my cars but have decided against it. They're brand new Project KICS R40 Racing Composite Wheel Nuts in Neochro Titanium Color. They are an awesome racing nut as they are comprised of a unique combination of materials. The thread of the nut is an alloy steel and is therefore strong and wont strip (Like the cheap aluminium wheel nuts do) however the boss which interfaces with the rim is aluminium as to significantly reduce the likelihood of rim damage. The result is a light, strong and safe nut. I have a set in M12x1.25 (part number RC03N) to suit most Nissans (All Skylines/Silvias that I know of) and I also have a set in M12x1.50 (part number RC01N) which suits most Hondas, Toyotas, Mazdas, Mitsubishis, etc. Price from the Aussie distributor is over $300. Asking $270ono for either set including shipping to any city in Australia. Pics:

SOLD

Hey all. Got a few parts for sale. First up is a near-new Trust T518Z 10cm complete with braided oil line. It was purchased brand new from Trust Japan via J-Imports by myself and has only done literally 1000km on a track car. Therefore it is in perfect condition; as-new you might say. Only ever used at up to 14psi. Made 240rwkw at this boost with full boost by 3700rpm. For those that don't know these are a bolt-on turbo for S14/S15 SR20 engines wishing to make 250rwkw. Asking $1400. ---------------------------------------------------------------------------------------- Next up is a pair of Tomei Procams to suit S13 SR20. The specs are 260/260deg 12.0/12.0mm. Tomei part numbers: 1431260120 and 1432260120. They were also purchased brand new from Tomei Japan and have done the same amount of kms. There are two small chips on the sides of one of the lobes but there is no damage at all to the actual areas which interface with the rockers. Asking $330. ---------------------------------------------------------------------------------------- And last up is a Bosch-branded Z32 AFM. This was purchased brand new from Bosch and has done around 2000km. This is not one of those second hand units off an actual 300ZX which are 20 years old and are probably out of spec. Asking $230 with plug. ---------------------------------------------------------------------------------------- Parts located in Eastern Melbourne. Can post anywhere in Australia at buyer's expense. Pm or call me on 0409403769.

Low kms and low fuel usage. 7L/100km out of every tank!! Do you want a cheap daily car which is good on fuel and just works? Then this is the car for you. I have owned this Corolla for 2 years now and it has been a brilliant every-day car. It has low kms for it's age at 190xxx. The engine is the renowned 100kW 4A-GE which is in optimal condition. The gearbox is as far as I can tell absolutely perfect. It has never given me any grief whatsoever. It has been serviced every 15,000km whilst I've owned it and it has registration until August. In terms of extras the car has: - Tinted windows - Some sort of aftermarket suspension - Pioneer head unit which plays MP3s. - Jaycar Response-branded Kevlar front splits (speakers). - Aftermarket (Unknown brand) mesh-style rims. - A new exhaust system (only a little louder than stock) While I've had it I've: - Replaced the two front wheel bearings with Koyo (the Japanese OE supplier for this car; no cheap shit) replacements. - Repaired the rear calipers. - Installed a brand new O2 sensor as the original was on it's way out. (Helped with fuel economy) - Also installed new air intake temperature and coolant temperature sensors. Also in the last few months I've also: - Installed a new battery. - Replaced the two front tyres with good middle of the range performance tyres. - Done a full wheel alignment. The car drives absolutely brilliantly considering it's age. I'm sure the first person who comes and drives it will take it as it still surprises me just how well it's built compared to other cars of its vintage. Would make a great first car. Oh and did I mention 7L/100km of city driving? On E10 which is cheaper than Unleaded? Come test drive it and I'm sure you'll agree. Looking for $3100ono. No swaps as I already have another car. Located in Wheelers Hill, SE Melbourne. Call me on 0423800325.

They get good reviews? Really? Don't bother. BCs are better and cheaper.

I've got a set of RE55S (aka RE55 ) tyres for sale. They are the SR2 compound in size 235/45/R17. They have done around 5-6 track days of Winton on a Silvia (which doesn't punish tyres like a GTR) and have 40%, 55%, 55% & 55% tread left respectively. The 40% one however is worn past the indicators in the centre due to slight overinflation but it shouldn't matter much as you're meant to shave these things down to 25% or so before tracking them in the dry anyway if you want all-out grip from them. They have never been street driven and have always been kept indoors in tyre totes/bags. Therefore they haven't seen too many heat cycles and have been warmed up and cooled down properly. On their last outing they did a 1:38 @ Winton on a 200rwkw Silvia with a noob driver (me) so they definately aren't too old or anything. They're $1800ish new. Asking $450ono. Pickup in SE Melbourne or I will organize a courier at your expense.

Umm isn't that what everyone in the industry does?

Because they can't verify the address with the card. It only applies to Australian credit cards. They have been subject to credit card fraud in the past.

I replaced mine with genuine Nissan ones, did two tracks days and now they're starting to melt around the edges again. lol.

Yeah it's confusing. If the value of your goods are over AUD$1000 at the time customs screen them then you will be liable for 5% duty on the purchase price only plus 10% GST on the total price including postage. I had to call customs for clarification cause their website is crap. If our local retailers get their way though it might be short lived: http://www.news.com.au/business/retailers-...i-1225945906001

What are the advantages?

Those three failures just posted there look pretty good. You could actually drive on those rims back to the pits afterwards.

The value of the GOODS has to be below $1000 AUD. Not the shipping. I bought a set of tyres and Bilstein shocks and it came to AUD$990 + shipping. Just snuck in.

If you're going to go to the effort of paying IMT fees and shipping you might as well get AD08s/RE-11s/Z1s.