32R

Fair enough, although I thought polyurethane bushes dont have a lifespan on age as such and are usually good for the life of a car if not flogged out. Suppose it depends on type and use. Think i must of got too cranky on the bolts and chewed them,didn't notice when I removed them but it's been awhile Wouldn't want them slipping mid corner though. One time taking a negative to a positive wouldn't be fun... Cheers for the reply

Hi All Having abit of a cleanout and found my Noltec arms Before removed I didnt notice any play and still seem solid when levered, but a couple of bushes are chopped around edges These bushes shagged and need replacing or okay to use as is and good to go? Photo of worse one attached Cheers

I have heard that too,yet no one seems to complain about the bias on the std 32 brakes and the rears are bigger than the front. Bit of a strange question but how do you pronounce Biot? Is it buy-ott or Bee-ohh thanks

You might be able to use the rear rotors of a R34 vspec 11 or 2001 on R34 GTR?, as they both run the larger rear rotor 324mm by memory,maybe machined down to suit These bolt straight on to R32 and fit the existing handbrake,I have them on mine When i was looking for rotors I'm pretty sure DBA dont sell the larger rears and Projectmu were the only option Also while you can use tin snips to trim the guard I used a 100mm grinder with a thin cutiing disc.I wouldnt let a 9 inch anywhere near my ally hubs,those things should need a licence to use Ronin what needs to be done to get the 350z rotors to fit?

Has anyone done this yet:)

Well done Mark and Russ:D On the street car class Wouldn't be easier to set a weight limit? Maybe no less than 50kg under std car weight...

The "yellow bleed wire" is yellow/green and should be attached to a white plug Its not in the back its behind the drivers side kick panel and runs the pump constantly when disconnected I'm sure theres a tutorial on here somewhere,if you dont have the GTR w/shop manual. How old is your clutch,how many ks and launches has it done?

This is a good guide for comparison http://www.1010tires.com/TireSizeCalculato...p?action=submit cheers

Or the flywheel wasn't machined before the new clutch was put in? Had my "extreme" clutch fail because of this,had it rebuilt by Ross and no dramas since...

These guys may be able to help.. http://www.racerindustries.com.au/

^^^^maybe try there Duncan Could someone tell me if the rear calipers of a R34 Vspec11 bolt on to a R32 Gtr? I know they run a bigger rear disc but I dont know if the caliper has a different PCD.. Thanks (dont mean to take over your thread Barron but it is sort of related )

..

..

So what calipers and rotors would you reccomend Roy? Seem to remember you were going to adapt a 343mm rotor to suit the GTR caliper any news on this..and would it suit a FPV style one piece rotor(343mm) Cheers