R31GXE3.0

Fantastic guide! Just thought I would mention though as I have been following your guide to do my rear bearings today, the axle nuts are 36mm, handy to know before you get it to that stage, especially if it's your only car and you don't own a 36mm socket, and I believe the nut that holds that handbrake assembly pin is 27mm, not positive but most socket sets have both. I also found I had to undo the bolts holding the drive shafts to the diff and move the whole shafts to get enough clearance to safely undo the bearing/hub bolts without risking rounding the heads, different height sockets perhaps. So far in my experience, the axle nuts have been the tightest, yet easier to undo than the nuts on the handbrake pins, not as much access to those, at least not when lying down with the car on stands. I personally am going to be attempting to find torque values in the workshop manual for as much of this as i can as thats the way I like to do things. For anyone else that cares, the axle nut is torqued to between 206 - 274Nm, caliper mounting bolts I assume to be the same as the fronts being 152 - 154Nm (manual only lists fronts), drive shafts I am not quite sure which I have or what the differences are yet, something else for me to discover but for shafts T82CT82F the torques are 35 - 44Nm and for shafts Z100D90F the torques are 64 - 78Nm. If it helps, the tailshaft to diff flange bolts are torqued 55 - 64Nm, so i guess if your axle shafts have larger bolts than those, use the Z100 specs, if smaller, the T82CT ones. The torques for the handbrake pin nut and the bearing bolts dont appear to be listed in the workshop manual so i guess i will just rely on standard torque settings that i can find for those, but i cant do that until i get the thread sizes of them.. Cheers, Kent

Do you have the rest of the r34 rear cradle parts? or just the k-frame?

i realise this post is a few months old, but do you still have them?

SOLD - Properly this time! cheers, Kent

make it $60 and i'll be happy too.. they are brand new..

okay so the guy who wanted them and asked for my bank details hasnt replied to my pm's.. so theyre back up for sale.. cheers, Kent

SOLD - PENDING PAYMENT - buyer didnt come through

Bump, Price Drop

Item: nismo clear side indicators for R33 (non gtr) Age: brand new in box Condition: brand new in box Price: $70 delivered express To Fit: R33 skyline non gtr models Location: Hobart Contact: 0419 818 654 (sms preferred) Comments: purchased these a while ago, now i need the cash to get my car back on the road.. and my guards would need chopping to fit them anyway (R31).. never got round to fitting them so theyve sat in my room in their box collecting dust for a little while now..

that would be awesome! cheers

hey guys, dropped my balancer when i pulled it off and cracked the edge off it.. so i need another one so i can put my engine back together and get it going turbo'd so any of you drift boys that go through an RB30 a week surely have one lying around.. cheers, Kent

no matter anymore, i assumed from the lack of response that you'd forgotten about this thread or something.. no matter, i've bought some elsewhere in the meantime.. cheers though

EDIT: Double Post

whats included in "rear calipers etc"? do they come with discs and perhaps drum shoes? keen.. let me know via pm plus freight cost to 7018.. thanks, Kent

is the series 1 ecu remapable? and is it from a vct motor? if so, $100 freighted? to 7018.. its a $7.50 overnight bag.. let me know via pm.. cheers, Kent

keen on rear discs and calipers.. freight/total cost to 7018 please.. let me know via pm.. very keen also wondering if you happen to have the drum shoes to go with? also, you have these, or other ones in another thread for the calipers and discs for $150 combined.. is that the current asking price? http://www.skylinesaustralia.com/forums/in...3+rear+calipers cheers, Kent

gday.. as per topic, after R33 GTST twin piston rears with discs and drum shoes. mounting bolts also preferably.. let me know what you have.. cheers Kent contact me via PM.. please..

gday dude.. pm'd you on the R31 forum but got no reply re: rear brakes.. im after the rear calipers, discs and drum shoes and whatever theyre mounted to.. you quoted me $250 delivered on the calipers and discs.. but i need the handbrake stuff aswell.. just the drum shoes and mounting stuff that is.. i asked you for bank details and sent you an sms also but didnt get a response. i have money, want the bits, let me know your price and freight to 7018 and we can go from there.. cheers, Kent

rear discs, calipers with mount bolts and hoses if they have them, drum shoes and what they mount to.. basically after the full rear brake setup ? how much with freight to 7018? cheers, Kent

im only after 1.. but if your price is right.. how much were you after?

hey guys, just after 1 standard rb25det injector im in tas but freight should be bugger all anyway.. cheers, Kent

hey guys, i need a pinout diagram for the 3 pin rb25 afm.. or just a list of which pin does what and which is which.. cheers.. Kent

WARNING! dodgy trader.. deposited money into his account for the RB25 crank angle sensor and havnt heard from him since. he ignores private messages and hasnt updated me since payment was made almost 2 weeks ago. if anyone knows who/where he is, please go knock on his door for me.. cheers

any sort of reply will do.. you've been online since i posted this, you've been online many times since i pm'd you last.. whats going on? you have my money.. whats happening?

c'mon champ, update me.. you've had money for a week now.. whats the progress?