R31GXE3.0

dont suppose you have a crank angle sensor? pm me if you do.. cheers

got a crank angle sensor?

dont suppose you have a crank angle sensor floating about? or any other engine parts? pm me if you do.. i have a list on needed bits cheers

bump.. still hunting

need a few parts for a series 2 rb25. some should be the same for all models.. i need: crank angle sensor with stock disc air flow meter oxygen sensor temperature sensors (screw into the top heater fitting on the inlet runners.. 2 of them) injector harness rb25det head oil return tube (the pipe that bolts to the exhaust side of the head near the front) 1 fuel rail mounting spacer (black plastic thick washer that sits under the mount for the fuel rail to the runners with a bolt through it) 1 injector retaining cap screw oil return fitting: temp sensor holes: fuel rail mount spacer: and where it goes: cheers guys, Kent

bump.. still looking!

cool, cheers

from an r33 rb25det.. plenum, runners, throttle, all sensors, all hoses, all bolts/washers/spacers/brackets.. only want the complete lot if possible including all the bolts and nuts etc to mount it onto the head.. possibly also with a full set of injectors and rail with all necessary attachments.. also with injector harness if possible.. i already have alot of these parts but i cant be screwed working out how they all go together and buying the bits im missing seperately.. so i decided to just buy a complete replacement and do something with the spares later if i can be arsed. located in tas.. 7018 is my postcode so you can work out freight when you need to cheers.. Kent

bump.. anyone? surely somebody on here must know how to tell the difference between the 2...

hey guys i just bought an rb25 head, the bloke i bought it from is adament he saw it running on the motor in an r34 gtt which has him beliving its a neo head, however when i pulled the exhaust cam out this morning the lifters had oil holes (presumably) in them which makes me think its an r33 head. i dont mind either way but he said it was a neo head, i havnt got any other parts for it yet that i can compare with, i have so far only recieved the head with cam gears attached. he also said its had the r33 cam covers put on it, which i assumed were the same as the neo anyway bar the valley cover, which is a 33 item with the twin cam 24 valve thing on it.. can anyone tell me what i have as im pretty sure now its a 33 head.. cheers

i only want the 25 for the head

G'day guys, some of you know me from the r31 club, decided this would be the place to ask.. how much am i looking at for a complete 33 25de? obviously its cheaper to buy from the mainland which is what i'll probably do.. just jap say "from $995" so im expecting private sale to be lower than that.. i could just ask paul, he knows a bit but this way i get other opinions too cos not everyones perfect, even if their driveway is... cheers guys, Kent