avalanche

Hi I have a R33 gtst. My car no matter if its hot or cold will not idle. This is what it does car starts easy, revs to 1900 rpm,drops to 1500, pause, then to 1000 for a sec then dies. Stalls all the time. Runs perfect above 1500 rpm. I have a HKS Sq BOV. I have tried so far: Cleaning Acc valve and all that muck out of the back of the plenum Repacing fuel filter setting the TPS Turning Idle screw in and out with the TPS disconected ( For some reson the IDle does not change 1 bit weather i turn it in or out) Cleaning out the AFM Located where the Ecu idle screw should be, to find the isnt 1 on it checked for leaks what have i missed? Can someone help me out please!

Hi I have a r33. Rear tyres are wearing on the insides. Just wondering if i can at home adjust the camber so that they wear evenly? How? or should i leave it for the guys to do properly? cheers mark

Hi I have a r33. Rear tyres are wearing on the insides. Just wondering if i can at home adjust the camber so that they wear evenly? How? or should i leave it for the guys to do properly? cheers mark

hey got a 21 speed mountain bike here for sale. vgc, brand new shimano gearing, new sproket, front tyre, dual shock with adjustable rear $150 ono mark Gympie Qld

Hi after 2 Cheap 235/45 17 "s With a bit of meat on them. And a space saver slimline 5 stud spare wheel for r33. In QLD or dirt cheap anywhere else so i can get courier. cheers mark Fs; worn out r33 standard gear knob

Hi after 2 Cheap 235/45 17 "s With a bit of meat on them. And a space saver slimline 5 stud spare wheel for r33. In QLD or dirt cheap anywhere else so i can get courier. cheers mark Fs; worn out r33 standard gear knob

thanks a lot just did it then. very much apreciated mark

probably wont be interest but hey. got 1 zeit rim 18" x 9 1/2" with a buckle off a toyota supra. 3 X 17” burnout tyres 1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn. 1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn 1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm $40 the lot i am in gympie qld. mark

Hi Have little for sale 1 x passenger side door moulding - redish wind thing that goes above door for R33 + all clips ½ a Drivers side moulding + clips that are on it (pritty useless) The lot $20 3 X 17” burnout tyres 1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn. 1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn 1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm Someone get some fun out of em. $25 all 3.

hi i have a r33 gtst just wondering if the radiatior needs bleeding after changing the coolant? If so where is the bleed bolt? thanks mark

Is it one of these? if so pm me all the info u need to know i can tell u where all the tube goes. Ill take some more pictures tomorrow kirby

Hi Any one have two cheap 8 cm bodykit blinker lights?

any 1

Hi I am out to buy 2 front bodykit blinker lights to fit this and a slimline 5 stud spare wheel for R33. thanks mark

I am in gympie QLD

ZEXIUS

Bridgestone GRID II

Bridgstone potenza

Hi Have little for sale 1 x passenger side door moulding - redish wind thing that goes above door for R33 + all clips ½ a Drivers side moulding + clips that are on it (pritty useless) The lot $20 3 X 17” burnout tyres 1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn. 1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn 1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm Someone get some fun out of em. $30 all 3. open too offers

Hi I want to buy a redish plastic moulding wind diverter thingy that goes on above the door. To fit an r33 skyline. Please someone tell me the real name for it. Here's a picture of the one i have but i need the drivers side one. Give you an idea of what i am talking about. cheers mark

Thanks i just measured it today and it is 9" rim so you think it will work?

Hi A mate of mine has 215 17s tyres he is no longer useing. and I 235/45 17s on my cars that are nearly gone. Just wondering if they will work on my rims. cheers mark

cmon one of you guy has one

hi, I am currently searching for a cheap, complete, stock standard clutch kit and flywheel to fit an r33 gtst series 2. With some meat still left on the clutch plate. 1 of ya's out there has just upgraded to a twin plate or wateva i want your old one. cheers mark