[R33 Idle Problem Need Some Help!]

Hi I have a R33 gtst. My car no matter if its hot or cold will not idle. This is what it does car starts easy, revs to 1900 rpm,drops to 1500, pause, then to 1000 for a sec then dies. Stalls all the time. Runs perfect above 1500 rpm.

I have a HKS Sq BOV.

I have tried so far:

Cleaning Acc valve and all that muck out of the back of the plenum

Repacing fuel filter

setting the TPS

Turning Idle screw in and out with the TPS disconected ( For some reson the IDle does not change 1 bit weather i turn it in or out)

Cleaning out the AFM

Located where the Ecu idle screw should be, to find the isnt 1 on it

checked for leaks

what have i missed? Can someone help me out please!

[Camber Adjustment, Can It Be Done? How?]

Hi I have a r33. Rear tyres are wearing on the insides. Just wondering if i can at home adjust the camber so that they wear evenly? How? or should i leave it for the guys to do properly?

cheers

mark

[Camber Adjustment? Can It Be Done? How?]

Hi I have a r33. Rear tyres are wearing on the insides. Just wondering if i can at home adjust the camber so that they wear evenly? How? or should i leave it for the guys to do properly?

cheers

mark

[Fs; 21 Speed Mountain Bike]

hey got a 21 speed mountain bike here for sale. vgc, brand new shimano gearing, new sproket, front tyre, dual shock with adjustable rear

$150 ono

mark

Gympie Qld

[Wtb; 235/45 17"s, Slimline Spare Wheel]

Hi after 2 Cheap 235/45 17 "s With a bit of meat on them. And a space saver slimline 5 stud spare wheel for r33.

In QLD or dirt cheap anywhere else so i can get courier.

cheers

mark

Fs; worn out r33 standard gear knob

[Wtb: Cheap 235/45 17"s Spare Wheel R33,]

Hi after 2 Cheap 235/45 17 "s With a bit of meat on them. And a space saver slimline 5 stud spare wheel for r33.

In QLD or dirt cheap anywhere else so i can get courier.

cheers

mark

Fs; worn out r33 standard gear knob

[Does Radiator Need Bleeding?]

thanks a lot just did it then.

very much apreciated

mark

[Wtb - Cheap Wheels For Drags X2]

probably wont be interest but hey.

got 1 zeit rim 18" x 9 1/2" with a buckle off a toyota supra.

3 X 17” burnout tyres

1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn.

1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn

1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm

$40 the lot i am in gympie qld.

mark

[Fs : Pass Door Moulding R33 And 17” Burnout Tyres]

Hi

Have little for sale

1 x passenger side door moulding - redish wind thing that goes above door for R33 + all clips

½ a Drivers side moulding + clips that are on it (pritty useless)

The lot $20

3 X 17” burnout tyres

1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn.

1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn

1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm

Someone get some fun out of em. $25 all 3.

[Does Radiator Need Bleeding?]

hi i have a r33 gtst just wondering if the radiatior needs bleeding after changing the coolant? If so where is the bleed bolt?

thanks

mark

[Hks Bov]

the ssqv one that looks like a bullet

Is it one of these? if so pm me all the info u need to know i can tell u where all the tube goes. Ill take some more pictures tomorrow

kirby

[Wtb : Bodykit Binkers Cheapset]

Hi

Any one have two cheap 8 cm bodykit blinker lights?

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

any 1

[Wtb: Bodykit Blinker Lights,slimline Spare Wheel]

Hi

I am out to buy 2 front bodykit blinker lights to fit this and a slimline 5 stud spare wheel for R33.

thanks

mark

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

location?

I am in gympie QLD

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

ZEXIUS

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

Bridgestone GRID II

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

Bridgstone potenza

[Fs:nothing Much 3 17” Burnout Tyres, Pass Door Moulding R33]

Hi

Have little for sale

1 x passenger side door moulding - redish wind thing that goes above door for R33 + all clips

½ a Drivers side moulding + clips that are on it (pritty useless)

The lot $20

3 X 17” burnout tyres

1 x Bridgestone 215/45 ZR17 GRID II Runflat tyre with light surface bubling on inside. And a not penetrated cut. Tred – Deepest part has 5.5 mm, lowest part 3 mm evenly worn.

1 X Bridgestone Potenza RE 030 235/ 45 R17 light cuts but no deep ones. Tred deepest part – 4mm lowest part 2mm evenly worn

1 x ZEXIUS 225/50 R 17 with a small not penetrated cut, Worn slightly on angle. Left – 4mm, Middle – 3 mm, Right – 2mm

Someone get some fun out of em. $30 all 3. open too offers

[Wtb; Plastic Wind Diverter, Above Door Mould Thing For R33]

Hi

I want to buy a redish plastic moulding wind diverter thingy that goes on above the door. To fit an r33 skyline. Please someone tell me the real name for it. Here's a picture of the one i have but i need the drivers side one. Give you an idea of what i am talking about.

cheers

mark

[Q : Can 215s Fit On 235 Rims?]

what size are your rims buddy. the tyres you have now is irelevant. you could have 235s on a 10 which would mean you have no chance of using the 215s. or maybe you have the 235s on a 7.5 which would mean the 215s will be 'ok'. 215 is a pretty narrow tyre though, I wouldn't use it on a skyline.

Thanks

i just measured it today and it is 9" rim so you think it will work?

[Q : Can 215s Fit On 235 Rims?]

Hi

A mate of mine has 215 17s tyres he is no longer useing. and I 235/45 17s on my cars that are nearly gone. Just wondering if they will work on my rims.

cheers

mark

[Wtb; Stock Standard Clutch And Flywheel]

cmon one of you guy has one

[Wtb; Stock Standard Clutch And Flywheel]

hi, I am currently searching for a cheap, complete, stock standard clutch kit and flywheel to fit an r33 gtst series 2. With some meat still left on the clutch plate. 1 of ya's out there has just upgraded to a twin plate or wateva i want your old one.

cheers

mark

[Wtb; Stock Standard Clutch Kit & Flywheel]

hi, I am currently searching for a cheap, compete, stock standard clutch kit and flywheel to fit an r33 gtst series 2. With some meat still left on the clutch plate. 1 of ya's out there has just upgraded to a twin plate or wateva i want your old one.

cheers

mark