Jump to content
SAU Community

Josh_r32

Members
  • Posts

    306
  • Joined

  • Last visited

  • Feedback

    100%

Everything posted by Josh_r32

  1. For Sale Rb20det bottom end, comes with sump, crank, oil pump, rear seal, pistons, rods suits a freshen up i.e. rings and bearings $100 For Sale T04 Turbo, Bolts onto a Rb20det exhaust manifold Its a 57 trim T04E in .63 rear housing with .50 Compressor using 76mm comp wheel no shaft play I have a internal wastegate actuator for it, and also a plug for the internal gate if you want to weld it up and put a external gate on it $100 Howarh Contact Via PM
  2. you did wel to get all that from the picture mate lol. would this be ok on a standard rb20det which manifold it bolts straight onto? or way off track>? ie lagmonster or only good for diesel patrols lol? cheers
  3. ok cheers for the info mate
  4. ok ive just been told that its not a external gate turbo and its a internal wastegate KKR/Hypergear style turbo. it's not a trust tdo4. ! anyone know what turbo this is? as i wouldt have a clue as i was told it was a td04 lol
  5. sounds good, It just needs a external gate and the turbo lines, ive attached some pics below Theres no shaft play on it Cheers
  6. Hey I just brought a TD04 Turbo that bolts onto a r32 gtst standard exhuaust manifold. The turbo has no shaft play. It needs a external gate etc so i want to swap this for a standard turbo with no shaft play that will fit my rb20det ( yes there still are stock rb20 turbos with no shaft play!) PM me if ur keen thanks Josh
  7. I have some stuff laying around the garage i dont use - Silvia/180sx 4 stud space saver $30 - R32 GTS4 Sump with Front Transfer case ( These Fit GTRS) $50 - Aircon Pump $10 - 6 Bolt Drive Shafts (x3) for $100 - (x2) 6x9 Speaker boxes (had alpine type s speakers in them before i took them out) they are black felt ones, $15 PM if ur keen Cheers
  8. how much for the "5 puck clutch with a bit of meat left on it" where u located matE?
  9. Hello, im after the below gear for a rb20det thanks - standard exhaust manifold - the sensor, left of the oil filter and the bolt that goes into the block (yellow sensor) - flywheel - a camshaft - a crank angle sensor - a exhaust mani gasket - a head gasket - acc valve - the think that ur coilpacks screw into - a old clutch that is still 'usable' lol ie wont slip when u boot in in 4th gear contact via pm thanks
  10. ok cheers mate. That is all he was after! Thanks again
  11. hello posting up for a mate he has a rb30 bottom end, it was a series 1 or something, anyhow it doesnt have the oil squirter jets that squirt oil into your pistons. as the pistons he pulled out of it were shattered ( motor was turbo'd and wasnt originally turbo) is he wasting his time if he spends money building this engine up or can u turbo them without the oil jets or should he just get the series 2? bottom end with the oil squirterS? he is spending money on new pistons so he doesn't want them to shatter. If its not recommended that you use them for turboing i assume there will be a rb30 bottom end that has been crack tested and cleaned etc for sale! Cheers
  12. Hey I have for sale the sump of a r32 GTS 4 wheel drive. It has the front transfer case on it. It came out of a running car so it should still work i imagine! Also have out of same motor Aircon Pump Water Pump Oil Dip Stick Couple of pistons and rods Make me a offer via PM cheers
  13. $300, need this sold asap PM me if ur keen
  14. I brought this bottom end for $100 as i was told the rings in cyllender number 2 were f**ked. but when it was pulled apart it was fine. Decided to freshen it up anyway. The engine has: new piston rings new rod bearings new main bearings new rear seal new front seal New water pump I have receipts for all the stuff from tas engine reco. I wouldnt mind a offer over 400. as ive spent a f**k load putting new stuff in her. I was going to put a head on this engine and use it for myself but lost interest Make me a offer by PM Thanks
  15. OK CHEERS GUYS PM'S DONE ANYONE GOT ANY DECENT NEW PISTON RINGS AND ROD/MAIN BEARINGS THEY ARE SELLING BEFORE I BUY SUM FROM THE ENGINE SHOP? I WILL BUY THAT HEAD OFF U JOSH, CAN SOME ONE PM ME HIS NUMBER OR CONTACT INFO? (SKYLINE032) THANKS
  16. they got camgears wit it? ill let u know, might try and find a complete head, if not ill grab them off you
  17. how much for the stock cams mate?
  18. Hey i have a pair of r33 gtst rims painted black $50 0404 331 770
  19. Hey after some parts for rb20det silver top Im after a complete rb20det head (cams, rocker covers, valves all that shit) in good working condition injectors flywheel clutch stainless exhaust manifold stock turbo in good condition, or something aftermarket that direct bolt on to stock manifold 'anythign else i might want PM me. and PM me dont reply as it easier for me to read my emails then check this post lol thanks thanks Josh
  20. whats ur rb20 head like or is it f**ked? send me a PM if its still ok thanks
  21. $80 In howrah 0404 331 770 thanks Josh
  22. For sale, pair of r33 gtst rims spray painted black $100 with crap tyres PM thanks
  23. SOLD please delete Mr ben
  24. for sale - a pair of r33 gtst rims painted black, with tyres but tyres are shagged. $100 for the pair in howrah - (x4) 235x45x17 tyres, one good pair with 80/90% + tread from memory, and one other pair with 40-50% tread from memory, $100 for all 4 thanks - also got a silvia space saver 4 studx114.3 $50 - and a apexi power intake adaptor to suit a sr20 $10 PM me if ur keen thanks
×
×
  • Create New...