tigr33

just go to a place that can machine/fabricate u an adaptor, costs around $30-50 for a custom one, just give them all plenum and ur t/b and it shouldnt be too hard to make

can any1 who's installed one of these copies, please comment on how the installation went? and whether there was much power gained?

industrial & commercial electritian

farrkkk..... i cant believe how cut some of u guys get over dosing. lol if some1 wants to do it 2 there car let em, no point moking them, rb sandy was asking for help, not 2 be moked at... its his car, not yours! so he can do woteva he wants to it R33HVN - gettin a bit racist there, im offended, not all of us so called 'wogs' have the dose on there cars, i dont and either 2 heaps of my friends

engine mods 1st, its gota have go be4 show

i had 1 about 2 years ago, and seemed very accurate, but not 100% of course

i made a box myself, used about 4mm thick pvc plastic sheet i got from a plastics shop, made all the bends with a heat gun, and plastic welded the corner joints.. as for piping just cut out the hole with jigsaw, and for cold air hav a pipe from my front bar going in2 the bottom of the box all up cost me $7.50 for the plastic sheet and $8 for black spray can so it looks legit heres a pic:

exactly right, done it to my r33 and sound exactly like a vl, dont bother pulling off vaccum hose or blocking off bov, do exactlty like this dood described

heres mine, bit jacked up but will slam it once 275's on the ass go bald

same here, only sometimes tho yeh? feels like its got axel tramP?? wouldnt mind also knowing if its normal or not

my boost is at 10psi n spikes to 12psi after 5500rpm

got a feul sender by any chance?? pm please

got a fuel sender by any chance? pm please

i recently installed a turbotech boost controller n ripped out the old solenoid, just used the tube off the turbo and the 1 going in2 the cooler piping.... as for the boost gauge, i d/c the 1 in the cluster (its goes to the plenum), the 2 power cables, 1 u earth and other i just tapped into the accessories on my ciggy lighter tip: may want to get ur boost controller on first n make sure it runs right be4 u install the boost controller (just so u dont overboost it) hope that helps

bump....

whats it cost roughly for installation?? just fryed mine @ calder park last night VLT-025 : where bouts u get that price from?

bump

if i have an aftermarket pump (i do but not sure which brand), will the float and sender be different to the standard one or the same???

hi all, after a used autometer water temp gauge, sport comp, must have black face please, can pickup from melbourne, cheers Mark

hi all, selling standard r33 dump pipe, no cracks or leaks, was working fine, selling due to upgrade, can pick-up in geelong or post can be organised at buyers expense, taking offers.. cheers.

hi, after a fuel float and sender to suit r33 gts-t, vic sellers only, for pick up, cheers Mark

i did clean it with a dremel slightly, is ur's a s2 motor?(maybe i got a s2 motor, i duno) can any1 else answer this?

sorry, just got 1 a few days ago thanks neways

if i have an aftermarket pump (i do but not sure which brand), will the float and sender be different to the standard one or the same???

are they all made from copper?? coz im fairly (not 100%) that mine were like metal or iron (some silver metal) and not copper, i got a s1 R33 gtst definately give that a go, they looked like crap in ur 1st pic, good work