Angus Smart

http://shop.ebay.com.au/mashske/m.html?_nk...p;_trksid=p4340 These are a bunch of items i had up here that have not sold and i need them gone!! so they have all gone to ebay.. Good upgrades to your gtst.. ending tonite!

yeah thats what i was thinking, front bar and lights out is easy.. anyway/.. when looking at your lights are you going to put in hid's again? be sure to check the plug end that goes into the main globe.. mine were burnt out and i had to buy a new/used hid driver from japan.. cost about $60 from yahoo. my left light kept flicking, and often wouldnt work at all. tho sometimes would work.. i just used the other headlights that car has (switch closer to the steering colum)

i think there is three screws for the headlight removal. its probably your best and easiest bet.

if i wasnt so skint i would buy it now.. my current exhaust is f**kin shit

And then can we slang them for 200 bucks? i'll see what my mapple can do with the pdf documents. i think i got some thing on here that translates shit into something useful

Rearrange the text, stick a jpnz logo on it and slang for 200 bucks..

Cheers andy will give that a shot!

sway bar Links to the lower control arm?? could be right. they did however look to be ok. but i am getting the same noises as you describe. would like it fixed so its perfect for the next buyer if someone ever does come along to buy it

i dont want to put that rubber rubbish back into it. its weak and will do the same thing again, was looking for more a replacement nolathane etc? are the front arms on the stagea similar to anything else nissan have? xtrail 350z etc?

Found what i think is the knocking noise under my stagea.. anyone know what is good to replace these bits? the black rubbers look slightly flogged out. just near the steering rack..

Thats the place i bought from btw.. not sure if i listed it before.. Yeah the pauters were a little heavy! but very very nice if your looking for something almost indestructible

Nice, there defiantly has to be a certain caution when driving on the snow. i have not for the 15+ years i have been driving to the snow been on ice, slid on ice etc. driven on snow plenty of times and never had issues on it.. what kind of road clearing do they have in Vic? do they do all the salting etc?

Them pauters and wisecos are looking cheap

Welcome to revesby best way to get there in the morning would be to go thru punchbowl rd/or canterbury rd then onto roberts rd and onwards to homebush/lanecove rd. i have never actually done it that way before.. or ever had to get there at that time. get a job closer!

yeah all was good, i think i may have been doing something wrong lastnite in the dark.. did it at work and all was good. glad to have a lock button again. FYI if your lock button doesnt work. you can close all doors on your car. press unlock (dont open any doors after this) and in a minute your car will locks and alarm on. all up it cost me 60 bucks for a new key from yahoo japan.

Alll good done it in daylight and now have an unlock and lock button on my car again! anyone want a slightly used key that only does lock via the unlock button and wait a minute?

Just near new york they are. just pull out that front abs sensor and you have your s15!

Yeah i have delt with them before too, they are quiet good. was the cheapest place on the web i could find for Mahle pistons/Pauter rods.

Ah sweet i though i remembered reading that somewhere.. Prices are USD

Pauter make some damn fine rods, i have some in my Gtr. cheers for that. using a 35 crank in the 25 block etc would that work? i did discuss this with my engine builder when i first took the car there to drop off the rb parts.

Whats the bore and stroke on a v35 engine?

Tried this yesterday i get to the stage where i have it on Acc, and click a button on the remote but i get nothing... scar non??

What he means is your time only starts as soon as you break the beam on the start line you staged into.. so a reaction time has jack squat to do with your 60ft, 1/4 mile time etc.. surely you all know this tho.

Awesome cheers for that. hopefully i can work out if i can mess with the 4wd system with the controller i have in my gtr

I bought this the other day to fix my lock button once and for all. http://page.auctions.yahoo.co.jp/jp/auction/138460365 50 bucks its cost to get to my door will be programming it shortly. there are a few on there and i was going to do similar to above and just get a key that looked like it could be cut down.. but a brand new button part was a better idea.