cheez

where did u get the rb20 actuator? been trying for ages to get 1 and am having trouble sourcing it? also btw how much did it cost?

whats the offset? how deep the dish?

do u have pics of these parts? can u do better if i take the lot?

my indicators were out of my gtr style front bar that came with the car when i bought it. not sure where u can get them from but im told that you can use trailer indicators which are the same size only that they are orange rather than clear.

then y under a different coach, they played a different style of soccer, played a more fluent game and had people going wow? with arnold he is a shit coach and the ref you have to say made some very poor decisions, 1 the red card against vince grella was not a red, and so many fouls that japan committed werent given. also it didnt help that the coach used all of his subs by the 80th minute when the red came.... poor coaching not to leave anything in the tank shoudl it have gone to etra time which it did. thats all. players arent that bad...

glad i could help ya out.

gtst or gtr unit?

if you fibreglassing the whole thing then your gonna have some left over resin. use that to stick down vinyl/carpet but be sure to apply a thickish layer and use the thinnest possible vinyl/carpet especially if you doing contours. if not and the area is flat then just make sure you got enough resin on.

you are correct in what you show me. thats exactly what you will need. it removes the drone noise to a point where you can barely here it cruising, but give it a kick in the pants and you can here it a little. y does it happen? coz there is more room in an oval muffler, so quitens down a bit, with a cannon you might as well just have a straight pipe, thus the drone.

94 series 1. need to borrow for like 1-2days to determine the issue. not gonna do no runners on you. will get in touch with you during the week to organise a time to borrow it. thanks al

oh well, socceroos out... damn that hopeless quaitie ref and that equally as stupid coach. both f*king morons

easy fix, do the whole exhaust as per normal, 3" dump pipe and front pipe, 3" hi flow cat, and just replace the canon muffler with an oval 3" muffler. this is the only way to get rid of the droning noise. its just a inherant quality of the canon. and oval muffler will be quieter but still perform just as good.

yeh i do. here it is. this is the side on view on the reo. the front 1 (left hole) is the 1 that i elongated and made oval. the back 1 i just grinded to allow for the extra pitch movement. there is a b4 and after of the gap.

spraying it up cost me $300. that was with a primer and block back to get rid of any possible pin holes, and then the colour. the guys @ GP Smash repairs in Epping, vic did the job. they @ 53 miller st.

hey guys as some of you know, i bought a front bar off ebay and posted it up to say how good it was. http://www.skylinesaustralia.com/forums/in...howtopic=173731 well i got some more bragging to do as today i got it back from my panel beater who during the week sprayed it up for me and i brought it home to fit. looks awesome!! some may remember from my previous post, that the bar had a small amount of gap between the headlight and bar. something common i was told in after market bars. i was gonna use a packer to remove the gap, but after some deliberation i tried a different approach. i ended up turning the 2 round holes in the reo (ones that hold it to chassis) into oval holes and opened the forked gap at the back of the mount up. this allowed me to pitch the reo up higher than standard and thus close the gap so much that a packer was not needed. just bolt her up and drive away. check it out. please ignore the hair dryer in the photos, i was using some sealant from work to bond bolts onto the back of the gtr grille copy so i could mount it. also the icy pole sticks are there to provide support to the grill and hold in position while the hair dryer was drying. like ive said before, if any1 ever gets an after market bar and needs a hand to fit it up before they spray it, pm me and im more than glad to give u a hand. (melb only, lol) hope you guys think it looks good.

yeh sorry for series 1. (pm sent let me drive)

lol. yeh cruise will go ahead.... no gtir i should write thhat in te requirements. lol

OMFG, so trying to do that to 1 of my mates. LMAO

post a pic up, but front what your saying you got series 1 wing, the little round 1. good way to start is to get a trial/gtr style front bar and series 2 rear spoiler. it wil change the whole appearance of the car. im fittin my new trial bar today. will post pics 2nyt so you can see what i mean. daniel

looks like a standard rear bar, but has add-ons like rear pods or a diffuser.

hey guys, just need to lend some1's stock ecu if they have it floating around. a mates car came with what looks like a modified/re-mapped stock ecu, and the car is pretty much dead stock. its having some issues down low that we been tryiing to resolve. in our attempt to do this we wantr to try a stock ecu in the car and see if it makes any difference. so if any1 out there in vic has a stock ecu that we can borrow, please let me know. or if u have 1 that u are selling, let me know. we are prepared to give u a bond for the borrowing. regards daniel

not sure mate to be honest. just jump on ebay and shoot him a msg. he'll be able to let you know.

what does the wing look like?

mates not looking for an upgrade at all. at best he just wants the car to have full zorst, fmic, pod and raise the boost to 10psi all the time. i have SAFC2 in my 33 andwith stock 7psi boost im making 178rwkw. and yes we have checked the car all over. everything is fine. checked all the bushes, springs, cv joint, rails the works, for any twists bends and the otherwise. thanks for your help guys.

apparently guys "ks rom" is a large company in japan that produces "drifting" computers, they re-map the standard ecu so as it produces more torque. car must have had more mods when over there obviously so without the same mods comp doesnt know what it is doing. will prob look at a SAFC2 and tune to resolve the issue, or SAFC2 and new stock ecu with a tune. will get more info on these and post as it comes to hand. http://www.gtr.co.uk/forum/upload/58735-ks-rom.html