cheez

just want to know, with the longer under body neons how ppl have mounted them under the car? have you used the supplied brackets or custom made brackets? wats the go?

if it makes the weird thump when its meant to be playing it generally says that either the amp's channel that your running off is playing up and sending an incorrect signal or that the amp itself is tuned way to high for the recommended setting of the sub. btw has it only just recently started to make the noise or is this from a new amp/sub set up? if your located in the northen burbs of melb your more than welcome to bring it round to my place and i can have a look at it.

it wouldnt be an issue if i moved then i would assume provided no wires are cut. cheers

just want to know what this is? its the silver box located in the boot to the underside of the metal shelf.

pics? and also is the bov a plumb back or atmospheric? postage to 3073?

my boost is set up as you see, fold down rear panel that is hinged, false floor so as to get to the spare tyre ok, and a small section behind each box, enough to put your hand in and change light globes.\

if you want a top pair of 6x9's, get your hands on the phillips pro series speakers, they arent on the market any longer but they are great speakers to have if some1 will sell them to ya. i have them in mine, and they are clear as, before the amp got installed and even better after the amp.

you could set it up like mine. the only thing you have to remember is to allow some space in between the rear of the box and the tail lights just incase you need to change globes. i just had the carpet extend under a faulty 3mm timber kicker. the bcak panel still needs to be carpeted but you get the picture. its on a hinge so it drops down tto access battery and then also i have mounted a seperate bracket to hold the jack there too as my spare tyre is till readily accessible in the middle of the subs. if you have any questions ask. i got 2x10" CV Comp series subs and a US Boss audio amp. cheers daniel

where are you located? state? try these sites and see what you think: http://www.envyimports.com.au/shop/category4_1.htm www.firesport.com but if u live in melb, there is a place in bell st near the corner of melville rd, spoilers galore i think they called.

i got a series 1.5, running with a gtr front bar. looks good. but i also like the trust style front bar thats been posted with the grille as part of the bar. only problem with the trust style bar is that the top of that bar has to be trimmed so as to not hit the bonnet and the sides require additional screws into the bar to help raise the sides slightly to clost up the gap that will be left under the head light. or so ive been told. cheers

hey guys, seen some sky's out there with the rear boot garnish lit up. i know you can purchase them like this for around 300 but was also told it isnt real hard to modify the one you got to start with? any help on how to acheive this would be good. cheers daniel

cheers guys. appreciate the help. daniel

just 1 more thing, will i need to change anything in regards to the comp or stuff like that?? do i just get a r32 act and slap it in and ill run the 10psi? it says about diconnecting the 2stage boost controller? does that mean the standard boost controller? if so which way do i then connect the hoses or just block em or wat?

hey guys been doing some research into the best way to boost the r33 s1 RB. check out the link: http://nissanskyline.6te.net/tuning_GTS25T.htm it has a section on boost. it says that with the r32 skline having the same boost actuator as the r33, its a simple swap and you increase your boost without any other mod. it mentions that the ony diff between the 2 actuators is the spring pressure (5psi-r33 and 10psi-r32), but is this really a healthy mod for the car? is it gonna last as long as say putting in a proper bleed valve and manually adjusting to get desired 10psi on the standard turbo? input would be good? cheers

hey guys my car needs that boost actuator to run obviously. im not driving it til i get 1. if any1 knows some1 with 1 leave a msg or pm me. im in melb but am prepared to pay postage from australi wide to 3073. cheers

am after the r32 boost actuator? you got that in the front cut? let me know

do you have a pair of guards or just the 1? and is the price for the pair or each?

monsta coolers are crap, mate fitted 1 and like in previous replies, struggled to maintain when we raised the boost. if you want a quality intercooler, 1 i have fitted to my 33, call GK technologies on 0401 554 476, speak to greg krusse. he sells the kits complete with piping for 400 plus 20 postage or pick up from melb. cheers ps. not genuine greddy. sprayed on during car re-spray

hey mate im after the standard turbo wategate actuator? you got that?

hey guys i see many ppl selling hicas lock bars, just want to know exactly what they do? some info sould be much appreciated. cheers

are you prepared to sell the adaptor without the bov? if so how much?

do you also have the adaptor for the bov?

do you have the maual gear boot in the car? if so how much?

do you have any pics of it?

where are you located?