Blue32

Back up $2700 ono

17 x 9 Enkei 5 spoke wheels - including 6 255/40R17 tyres (4 on the wheels). 2 x tyres Maxxis @ 20% worn, 2 x Bridgestone runflats at 40% worn, 2 x Maxxis @ 80% worn (tyres not on rims). $800ono One rim has a hairline crack on the inside of the rim on the very outer edge of the lip - been quoted $200 to fix. Work Wheel nuts x 16 brand new. Will throw in 4 x lock nuts WITHOUT key for free. Locknuts have had some extra lovin' with an extra FBH and socket....but that's another story. $100 plus post. Swirl Pot / External Fuel Pump setup. Some fittings still attached - previously housed a single 044 and was fitted to R32 GTR. Get your beast prep'd for the SAU track day and eliminate fuel surge! Fitting available. $250 Previous setup: That's all folks (for now)

Awwwwwwww 18 x 10.5 +15 goodness. Never used still in packaging. $1100 Great quality wheel - I'm just going a different direction is all the reason for sale. Sick!

Double post......

Wait for it......

Ben, Here is an image of when it first leaked. This was when hot and cooling system pressurised.

Hi mate, not at this stage, the engine is still useable in its current build state. I would if I have buyers for rods and pistons.

Now on eBay - http://www.ebay.com.au/itm/220925089677?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_1413

RB26 Short Motor $2800!! Perfect rebuild kit for an engine suffering the dreaded spun bearing saga or just somebody wanting forged internals for a steal! Price includes Engine Block, Long Nose Crank (>1000kms old), Precision Motorsport H Beam conrods (http://www.precision...otorsports.html)and Arias 86.5mm forged pistons only (no ancillaries / sump etc). The engine block has suffered a very small split inbetween No 3 and 4 cylinder which has been repaired using Irontite. Initial indications were a few drips of coolant under the car after shutdown, then the repair was carried out and it hasn’t leaked since. I am selling simply because in the race application I use the car for, it will not last the season and hence I need to replace it. Engine is still in car and running, interested parties are welcome to hear it running if need be. Cheers, Andrew

RB26 Short Motor $2800 Perfect rebuild kit for an engine suffering the dreaded spun bearing saga or just somebody wanting forged internals for a steal! Price includes Engine Block, Long Nose Crank , Precision Motorsport H Beam conrods (http://www.precision...otorsports.html)and Arias 86.5mm forged pistons only (no ancillaries / sump etc). Crank and rods are <1000kms old, Pistons have covered 3000kms. Effectively, they are all brand new. The engine block has suffered a very small split inbetween No 3 and 4 cylinder which has been repaired using Irontite. Initial indications were a few drips of coolant under the car after shutdown, then the repair was carried out and it hasn't leaked since. I am selling simply because in the race application I use the car for, it will not last the season and hence I need to replace it. Engine is still in car and running, interested parties are welcome to hear it running if need be. Cheers, Andrew

We gained 30+awkw to end up with 175awkw and more importantly gained 100% more torque - I'll default to Martin to share the results from the dyno........ As you know they are already quite grunty for a 4WD, but even more so now and it drives very nicely. Fuel economy should increase now too - test underway currently as I compare the usage on the current tank load.

Willall is the go for all your tuning needs - no Disney dyno crap there - just no frills tuning that simply works. On a related topic - big thanks to Martin for tuning the tow rig, an excellent result!

See you all down there! This is going to be - as always - an epic event with some very fast cars entered

Be sure to put the hose in the right way around or the air will flow backwards. Check for the arrow on the hose.

Initial loading is controlled by the clutch packs - K and A will help you out :-)

Flyboy's GTR a little further north than 400awkw now Peye :-)

Yep - couldn't resist the price...... Sorted for Legend of the Lakes now, and perhaps a single lap flyer at Mallala!!

I take it you - I should need a bit of help,, thanks for volunteering

Not dissimilar to having a wife though Jarrad :-)

My money is on a vacuum leak.....

I am the most bang for a buck guy you will meet. I have no experience with the NPC, but numerous examples of a certain other well advertised local clutch which just does not suit the applications it applies to. Trust me, spend once, spend less. You want to argue with 450+ rwkw on a mainline with slicks and semi slicks on the track, numerous 9000rpm launches, come see me, got the experience. When it comes to this, I don't even think of the clutch, simply, it works. Or you could spend half the money, at least twice, and worry about the clutch. Simple really. And yes, I am taller Steve you joker you

If by Kettle of Fish you mean input shafts swimming in a sea of stripped and broken metal shavings - then yes

When I said local - I meant in our state........

Got several unhappy examples to draw on - I'm all for supporting the local businesses but when their product fails prematurely, I can't help but call a spade a spade.

OS Giken Twin plate - set and forget. Don't touch the local clutches for performance imports - you won't be impressed.