Blue32

What's wrong? 4000 laminated confirmed corrected printed calibrated killa watts at the wheels in Disney Land not good enough for ya?? Cheapest perfomance upgrade I did was spend $60 on a DD dyno run.....

if only the R32 GTR came out as an auto...........damn I'd be fast(er)

You won't need them Luke, I'll be in front of you

Cheers guys - the car is really coming along nicely now thanks to many hours of work in the cars' Secret Development Headquarters (which also doubles as a shed - how 'bout that!). I've got the tyre warming sequence on camera, I'll upload it soon as I get some time. That and the crazy in car. Cold track, medium compound slicks and lots-O-power didn't make my life easy for the run up the footpath to the top!

All Had a great day out at a cold Collingrove today - with the intention of shakedown runs prior to Time Attack Round 3 on June 13th. Recently, the car has been upgraded to run 'corn gas' with a new set of ID1000cc injectors from Tuff Car Parts, and fuel system mods thanks to Pete and the guys at Autosport. With a massive thanks to Martin and the crew from Willall Racing, the car picked up 50kw at the wheels with 3 psi less boost, which is most definately noticeable on track! Fitted with a developmental Willall Racing upgraded braking package, and the Mt Alma Mile-spec wheel and tyre package, I was able to pilot the angry beast to a CLASS WIN, testament to the excellent support from the previously mentioned sponsors and Major Sponsor Willall Racing. I am looking very much forward to running Mallala in a couple of weeks......... Some pics of the car / recent mods

Hi all, I'm after brand name DECENT 245 or 255/ 35 or 40 series 17 INCH TYRES x 2. They need to be on the wear indicators, and the harder compound the better. It seems with a healthy dose of E85 my car has run out of headroom on the cheap Maxxis tyres it currently uses for the dyno time!!! Thanks all!

Injectors SOLD!!!!!!!!!!!!

bump it up!

The injectors have done 3500kms and are up for sale as I upgraded to ID1000's to run E85 and more boost / pwr. As an aside these injectors supported 430rwkw with a single 044 external pump and factory fuel pressure with a sard rising rate reg. This was on a mainline dyno as well....

gizzmo do make these already - I have one on my RB26 and have found it has reduced intake temps when heat soak was an issue (when it was driven on the road). As far as making more hp, it can only help, I do not have back to back figures but the intake temps are down by around 5 degrees over what they used to be.

Bump it for the injectors!!

Gizzmo Shift light - back up for sale due time waster $100 delivered SARD 700cc still available $500 Factory RB26 fuel rail $50

Dropping resistor SOLD Injectors still Available Factory Fuel Rail with custom insulation $50

Still available as per previous post

Oilstat SOLD Brakes SOLD Dropping resistor and injectors still available

You Sir, are an absolute legend. Thankyou very much!!! I owe you a

Hi all, I have bought a second hand SARD fuel rail for my RB26, and I the small spacers haven't been included with the rail. Can I ask a huge favor and see if anyone could measure the length of the spacer included in the kit for me?? I have googled it but have not found an answer. The spacers are as pictured below: Cheers, Andrew

I am happy - but I have just bought a second 044 and ID1000s for the introduction of E85 :-)

These are my shims - check eBay as they have bids but are not sold yet :-)

My 32 GTR with STD capacity, single 044 pump and 700cc with factory base fuel rail pressure makes 430rwkw duty cycle in the mid 80's. AFR is solid at 12:1 Andrew

Shims SOLD

Pm's replied

Shift light SOLD