FOOLBOOST

SOLD to me

Bump Coil overs SOLD

Nismo Fpr SOLD R33 Boot with Spoiler & lip spoiler now $100 R33 Boot struts and hinges $20

Price drop 11k

SOLD

NOW SEPARATING KIT Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes and 19psi actuator Id CHRA is 706451-24 $1600 Custom Braided turbo feed line, oil restrictor and custom turbo drain, and water banjos suit gt30 gt35 $150 Hks alloy hard out let elbow 2”-2.5 outlet” with silicon joiner and clamps to suit gt30 gt35 $120 Tune length low mount stainless manifold suit rb20det rb25det $300 3.5" Bellmouth dump front pipe suit gt30 gt35 $350 3” catless pipe $80 3" Silicon with alloy connector intake pipe and clamps suit gt30 gt35 $100 Sparco Bonnet Pins $40 Billet Coolant Temperature Sensor Adaptor $30

NOW SEPARATING KIT Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes and 19psi actuator Id CHRA is 706451-24 $1600 Custom Braided turbo feed line, oil restrictor and custom turbo drain, and water banjos suit gt30 gt35 $150 Hks alloy hard out let elbow 2”-2.5 outlet” with silicon joiner and clamps to suit gt30 gt35 $120 Tune length low mount stainless manifold suit rb20det rb25det $300 3.5" Bellmouth dump front pipe suit gt30 gt35 $350 3” catless pipe $80 3" Silicon with alloy connector intake pipe and clamps suit gt30 gt35 $100 Sparco Bonnet Pins $40 Billet Coolant Temperature Sensor Adaptor $30

SA

Bring it

Guys have a Trust fmic kit + piping kit, silicon and clamps, came off my r33 will also fit r32, r34 and stagea. This cooler uses the shortest amout of piping giving unbeatable response, made 310rwkw on my car. $500ono

Bump

Bump

Bump

Bump

Bump

Gt3540 + Stainless Manifold + 3" Intake + 3.5" Dump Front good for 350-400rwkw, turbo was bought from ATS( Adelaide Turbo Services) 3 months ago can call Bill to confirm. $2500 -Garrett GT35 Turbo with 0.5 front cover (faster spool then 0.7) and 0.82 rear IW, comes with Custom Braided turbo feed line, oil restrictor and custom turbo drain, water banjos etc and 19psi actuator, also included is an hks alloy hard out let elbow to suit. Id CHRA is 706451-24 -Tune length low mount stainless manifold -3.5" Bellmouth dump front pipe & catless pipe -3" Silicon with alloy connector intake pipe Water Methanol Cooling mist setup suit skyline r33 in excellent condition, kit is wired up ready to bolt in $400 Includes the following: Modified r33 skyline washer tank (also spare new trunk mount tank) BLACK 150 psi pump 3 meters high pressure hose Brass fittings World class brass checkvave rated at 600 PSI and over 300 F Injector that installs from the OUTSIDE of the pipe Injector holder Relay Relay Harness Fuse Fuse Holder boost switch adjustable from 1-25 psi. various electrical connectors Also comes with new spare tank and fuses/relays R33 cross over pipe drilled and tapped Sard 850cc side feed injectors rb25det come in fuel rail with fuel regulator, injector o-rings, collets, injector loom with clips soldered in and modified clips to suit, all bolts straight into rb25det, only 2 months old! $800 Apexi Power Fc + Hand Controller Suit R33 RB25det Comes with 310rwkw tune to suit rb25det with, 3.5" exhaust, gt35, z32 afm, sard 850cc injectors $1300

Good Cooler, made over 310rwkw with mine

No selling complete

Rb25 turbo with outlet pipe and lines s2 coil packs r33 manual ecu R33 Cross over pipe

My car was a series 2 and it worked fine

Near the city

Rb25 turbo with outlet pipe and lines s2 coil packs r33 manual ecu

Putting car back to stock...check my other threads