superjet760

Hey boyz can anyone give me any info on camber toe specs and whether you should run harder setting in the rear? My car is a r32 gtr has gab adjst coil overs all round i going to run street slicks also going to fit adjustable arms for caster and camber adjustment. Its makes 573awk on pump fuel so race fuel and no2 should make about 650kw also what tyre pressure you guys run on m/t et drag radials? Any help would be appreciated thanx in advance

Hey Mate What sort of auto you using? are you keeping it 4wd?

hey mate are these dis-001 coils? if they are il give you $450 for them

Call Hypertune they make them speak to mark 02 95317632

I was wondering what is Aust fastest genuine street driven gtr? 1/4 mile e.t and mph

Im after a gts-4 auto bell housing or a complete box even if its blown Thanx Paul 0418 113 848

i will give you $550

Drill holes in your head lining so they are on the roof like a real fighter jet

Anyone got any more ideas?

The reason i dont want to block it off is if one gate dosnt open properly it can still go through the other gate when the balance pipe is open. And i thought of welding a hard pipe in but im worried it may crack and its a nightmare to pull the manifolds off if it does crack.

Hey boyz i got a pair of hks high mount manifold on my gtr and the flex on the balance pipe between the manifolds keeps leaking due to the shit design if you look closely the flanges on the manifold are not as thick as the ones on the flex so when the gaskets are installed and bolts are tightened up the flanges on the manifold bend therfore make a dirty exhaust leak. Now that i have the manifolds off{what a mission} i want to cut the flanges off the manifold and replace the whole flex with something else. what im after is a flex similar to the stainless flex used on an exhaust system after the dump pipe. But i cant find anyone that makes one small enough. I would also like to weld v band flanges on to make removal easier but again i dont think you can get a v band that small. The size of the pipe is 32mm o.d. Any help would be appreciated thanks for your help in advance Paul

Gas it tha fu@k up. My 32 Gtr was stock with n1 turbos i had a 75hp shot and it made 365kw at 4 wheels. It never missed a beat. N2O all the way

The 2 in line with each other are knock and the one next to oil filter is oil pressure.

They will definatly fit a r32 GTR i have the same wheels same offset on mine. just roll the lips on the guards

As said befor it will be power steer fluid low

Hey boyz Where can i get a gtr rear gearbox mount nissan has none in stock has to come from jay pan. Thanx

I have 272 10.2 hks cams in my 3ltr and it makes power to 9000 no prob. As stated the bigger cams the later the power will come on.

Gtr with HKS 3037s

Here is a pic of my gtr engine bay with hks 3037s turbos

Sydney N.S.W Australia

I have brought 2 sets of hks cams one set 264 and the other 280 and they both had hks on them

Hey Does anyone know where i can get some clear inicators for my 32 gtr? Thanx in advance

Look out godzilla motorsports ha ha

I have the 1000hp balancer yes you can run the a/c just take the belt off when you race it but in saying that i have reved my engine to 9000rpm and the compressor and belt are fine same with the power steer.

Pics of mirrors please