Jump to content
SAU Community

adam-__-

Members
  • Posts

    2,844
  • Joined

  • Feedback

    100%

Everything posted by adam-__-

  1. Try your local wreckers, look for people wrecking their 4 door R34's in the for sale section (could be a bit hard) or go to your Nissan dealer (will cost you quite a lot). Good luck!
  2. Best to get a new one from Nissan. Buying one from the wreckers, you could just end up with another stuffed one.
  3. Try asking some of the traders on here and ns.com. Some of them should be able to get a set of wheels that you're after. Try keeping your eye on yahooauction as well. There are quite a few people who could get gear in for you from yahooauctions. Just let them know the item you're after and tell them your max bid, etc. Good luck with it all.
  4. What did you do about the indicators? Just move them to where the reverse lights are or?
  5. I believe that it's for flexibility. Inside there should be metal shaped like a spring to hold the tube from calapsing(sp?) on boost.
  6. Try adjusting the little 'hook' thing that the boot holds onto. If you undo the nut holding it, you can adjust the hook up and down. Pull it up so that it's easier for the boot to hold onto it. I remember when my hook's nut was loose, it just dropped down and my boot couldn't grab it to lock. Hope that made some sense.
  7. How about a cruise to Mt Buller for some snow? Or will it still be too warm in April?
  8. Red is positive and Black is the ground (negative). I'm not responsible if your car/battery blows up
  9. Was this in the West again? That's some weird conversion. Come on now... No need for that. We all know R32 has the best aerodynamics.
  10. adam-__-

    Fuel

    As long as it's 95ron or higher, it should be fine. I would highly recommend anything 98ron or higher though.
  11. Yep, made or supplied by eastbear last time I checked.
  12. Don't some/one of the traders sell the metal intake pipes?
  13. Do you have an atmo bov installed? If you do, that's the thing causing all the stalling. To stop it, remove the bov and reinstall the standard plumb back bov. If you don't have one installed, I'm not sure what it could be seeing that you've already checked if there's any vacuum leaks.
  14. The extra cables are there incase the way you connected it now doesn't work. If it turns on, it should be fine and that the brightness of the lights are because of the kit. I just think you should take the kit out altogether. Reflectors with the HID kit will produce HEAPS of glare and hot spots.
  15. You're going to need the rear bar as well. From what I can see, I don't think they'll be a straight swap over. The part where the indicator is on the sedan's, the lights are more curved compared to the coupes. My answer would be that it's not a straight swap over, but then it doesn't hurt to try it for yourself.
  16. WTF? Are you serious? Was it the MKIV supra's? On what model skyline (32, 33, 34, 31?)?
  17. Silver. Silver always looks sexy. I just wouldn't see the point of getting a car resprayed into another factory colour. Respraying the same colour to get a newer look to it, yes, but respraying to another factory colour
  18. It would be interesting to see what the S15 front would look like on an R32, but I wouldn't do it. Everyone having front conversions are doing it to S15's. WAY too common. Maybe S14a front conversion? Or 180 front conversion? Everything's going to be custom anyway so might as well change it into something others usually don't. There's a S14 with a 180 front here in Melbourne done by Vu and his shop and it doesn't look too bad.
  19. They're newer and look better in my opinion, but they're both just as common. I'd get the S15.
  20. Merry Christmas everyone! Take care on the roads.
  21. 6? The NA R32's and 33's are 4 stud. NA R34's are 5 stud. Only things to come with 6 are 4wd's (patrol's, etc).
  22. The tint on that car looks like mine. Can't see shit at night. My car came with the tint from Japan so I don't know for sure what it is, but I'll guess and say that it's 5%. I'm thinking the on in the photo is the same.
  23. There's a tutorial on how to keep the low beam on while the high beam is on.
×
×
  • Create New...