rbs30

Newcastle NSW

That’s a great deal and I would jump on it if you were closer. Melbourne is a bit of a hike for me though unfortunately

Is the CD009 similar length from bell to shifter? car will just be for the street with the odd track day. It’s RB30det, and weighs about 1000kg

FS5R30A the nav box isn’t it? I did think about those. Any issues? I wondered if the bell housing off an rb30 patrol would work as they are the same gearbox but with a transfer I believe.

What is the go to gearbox these days for a RWD RB? Back in the day VG TT boxes were cheap and strong. Seems they are as expensive as an RB25 box these days. What are the options without remortgaging the house?

Thanks, I’ll give that a try. I heard they don’t support old stuff but it’s worth a try

Hi all, does anyone happen to have a base map for an e11v2 they could share with me? I had this ecu sitting around so put it on a rb25/30 Datsun I have here but it has no map loaded. rb25 map would work to get it going too. 650cc injectors ideally but anything will be a good start. I know it’s an old ecu, and I’ll probably replace it in time but I’d like to get this going as a start cheers

A 5 year old AR5 which is just as strong as an rb25 box is $200 from the wreckers. Then you just need a $600 adapter

Ha anyone used a Toyota r series gearbox on their RB? I see you can buy a bellhousing to suit an rb, so wondering if anyone has done it? The AR5 boxes are cheap and are the same as a R154, the bellhousing was around 600. Possibly a cheaper option than an rb25 box or z32 box these days

Complete or bare? R33?

Cheers man

Sweet as. Thanks for the info. Did you run a restrictor anywhere in that setup?

Nice. I like it. I work in a machine shop so I could just mill that section of the deck away. I like the idea of 6mm of thread. Did you tap it 1/8 bsp same as the oil sender? Did you get that hose made at a hydraulics place?

Lol nah man not blowing smoke out ur ass. Keep getting sidetracked every time I try to respond haha. So that looks like it goes down just in front of the solenoid does it? Have you had it going yet? Looks good. I like the idea of having a bit more meat there to tap

Im sure this has been covered a few times, but last time i built an RB30 i deleted VCT. I want to use it this time. I see some people say to just drill and tap into the gallery on the head, and others weld a -3 fitting. Trying to figure out the best way to go. How thick is the aluminium before you get to the gallery? If its thick enough i guess a tapered thread is fine but wasnt sure if a weld on fitting would be better.