bman

Still for sale? Pm Sent!

PM Sent

PM sent

Hi all, This weekend i have bought a bleed valve to obtain a bit more boost out of the old girl. Now we have run into a problem. Every now and again the car shunts and jolts and at times gets so bad, speed drops by about 50km. I had a mate of mine rig it up for me and seems a bit odd. There are two lines coming of the standard rb25 boost solenoid right. It has been rigged up like this: Actuator --> Valve --> Tee piece to intercooler piping and another nipple just below. Now shouldnt this nipple below the intercooler piping be blocked off? Any help would be greatly appreciated. Cbeers -Bman

Still for sale?

Hey all, I have a problem at the moment that i can't put my finger on. 3 weeks after i purchased my 98 Series 2 Skyline, i installed a clarion dual din (unsure of model) in to it to replace the factory player which did not work. Installed fine and everything works great, on screen visualisations / eq all work, etc etc. The problem being, after approximately an hour and a half after turning the car off, all my presets, eq settings and headunit clock all reset, as if it were just installed.. All wiring is correct, i haven't mixed up the IGN and 12+ wires up, the clock next to the steering column is functional and doesn't reset. Its got me absolutely boggled as to why this is happening. Has anyone had similar problems? Cheers -Bman

Pics and condition

Hi mate, How much to post to MIRANI 4754? PM or text me details 0448 944 096. Cheers, Bman

AFM and Panel Filter sold to me

Ill take the stock AFM and PANEL FILTER. Please PM me. Cheers -Bman

pm sent

PM Sent

PM Sent Pics of Cluster to brenton.barrow [at] bigpond.com

I don't suppose there are any available a bit closer to home?

Hi all, Just want to know where to get a hold of a series 2 rear garnish (the ones that light up). As far as i know, they only came out on a few of the r33's as a factory option, and are rare as. Any suggestions are appreciated, cheers in advance. -Bman

Hi All, I have for sale a Greddy Full Auto Turbo Timer in black. Selling due to lack of funds. Originally bought for the car, then found out that it is not compatible with my current immobiliser. Is open with all components, but never used. Would like to see go for $145, but if bought with in the next day, will sell for $100 (10/12/06 - 11/12/06). No damage to the item. Supplied with all cables to get you under way, and english translations for installation can be found online.

See if this helps, http://www.nengun.com/doc/nengun-0114-0019...imer_manual.pdf Cheers, -Bman

Alex_r33: They were about $90.00 + Postage Josh: Im sure they do make them for the GTS's aswell, I got mine off ebay, have a look on there and try searching for EL GUAGES or similar and you should have some luck. xtra.5: I didn't see the nismo guages until after I purchased these.... Should have waited a little while longer. Cheers

Heres some pics, before and after illumination... Would like to know what people think

Here is my new baby, Bit dirty at the moment, but not for long, shes a 1/98 Series 2

Adz, I personally have white faced guages installed in my Series Two. To install: 1. Remove dash surround and remove dash cluster. 2. Unclip the front clear panel and expose the black bezel. 3. Remove bezel to expose guages. 4. The guage faces will have an enlarged center hole to slide over the needles... and sit over existing faces. For boost, you have to remove the tacho by unscrewing it from the back and pulling out from the front. The whole assembly should come out. (NOTE: DO NOT REMOVE NEEDLES) 5. Depending whether your faces are EL, remove all lighting bulbs except for warning lights and the one down the bottom right. 6. Again if EL, feed wires through where the bulbs used to do and hook up to 12 volt source (headlights) 7. Re-assemble and put back in. 8. You now have a sexy new dash. Any more questions, give me a yell. Cheers, -Bman

hanyou: PM for you

Noy, I know a mob up here wrecking a series 2... Will find out to see the rear is in good cond and will let you know. Cheers.

Noy, With the possible moulds, any chance getting them made for Ser.2 GTS-T? Also, how much would you expect these to go for? Cheers

Can you get some photos of the plenum? Pics to brenton.barrow [at] bigpond.com Cheers