rs73

That's because NONE have been shipped yet. They were just doing the invoice today and should be charged to my card account today. Sorry for the delay, as they're doing the invoice today, I believe they should have 7693 & 908 in stock today...

Those who have 7693 & 908 in their orders will be delayed. I was told those two types of rotors will come in monday and they will get it done ASAP and try to get those ones delivered and arrived before next week Thursday. So maybe they will likely to ship it Tuesday... I will follow up Monday to see if those 7693 & 908 have arrived at RDA as promised.

Hi, unfortunately yes, I have finally got a reply from RDA today as below: Looks like 7693 & 908 are out of stock again Sorry guys for the delay... but hope they can finish them as fast as possible...

I haven't got a chance to check again today, but I noticed they haven't charged my account so I will follow up again tomorrow. The only reason if they had a delay is if they're waiting on stocks of some rotors... I've just send an email to RDA and checking up if there's any delay with certain part numbers...

what on earth does FMIC having to do with rims failure...

Firstly, great calculations... but I don't think it's entirely right with the exhaust on turbo. I have a turbo and my stock R33 standard exhaust run on a cat, then a resonator (also called the extra/middle muffler), then rear muffler just before the twin outlets. my current aftermarket one is still running on the same layout, after cat there is a middle resonator then a decent size end muffler. Secondly with that calculations, (I also read in previous issue of HPI mag) that even a 2.5" - 2.75" inch standard exhaust system on a turbo car is still sufficient to support more than stock power level... I know this is an N/A forum, but I found that this concept is quite intriguing, considering most turbo owners will upgrade their exhaust to the biggest diameter they can afford as the first step of mods before doing anything else... and I'm sure on an M3 with +/ 246kw they still run on smaller than 3" exhaust system. Problem is probably those 3" exhaust bolt on system from japan were possibly designed for 400-600+hp application for drags or circuit, and there's just hardly any option for a good bolt on 2.75" system from well known manufacturers. but no one ever tried bolting a cat back n/a system from i.e. trust or hks intended for gts onto a gtst.

pm sent, J32

Does any of you ever felt that a 2.5" system on a non-turbo car sounds LOUDER than a 3" or 3.5" system on a turbo car? Most turbo exhaust system I've heard only felt very loud when off boost, but not when the boost is spooling up/on.

I followed up with RDA this afternoon, they have received & processing the order.

order's submitted but I'm still waiting confirmation on production & delivery... Will keep you guys posted, and I'll follow up if I haven't heard from them by tomorrow lunch time.

The following payments & orders are submitted this morning... 1. SRB R32 GTR (early) Rear Grooved Rotors 908G 2. Franga R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 3. J'z-R33 R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 4. xolent - (order & payment just cleared as of 8:30am 10/11/2006) 5. MightyAtom R32 GTR (early) Front Slotted Rotors 7926S & Rear Slotted Rotors 908S 6. Duy - Rear Slotted Rotors 908S 7. stuartr32 - S15 Front grooved rotors 909G & rear grooved rotors 906G 8. dazza05 - R33 front slotted rotors 7693S 9. s13rb20det - R32 front slotted rotors 909S 10. Woodys - R33 Gtst front 7693S & rear 908S 11. simmyb - R32 gtst front 909s X 2 & rear 908S 12. NickR33 - R33 gstt front 7693S 13. rbboy_23 - R33 gtst front 7693S & rear 908S 14. vbevan - late R32 GTR front 7701G

The following payments & orders are received & cleared... 1. SRB R32 GTR (early) Rear Grooved Rotors 908G 2. Franga R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 3. J'z-R33 R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 4. xolent - (order & payment just cleared as of 8:30am 10/11/2006) 5. MightyAtom R32 GTR (early) Front Slotted Rotors 7926S & Rear Slotted Rotors 908S 6. Duy - Rear Slotted Rotors 908S 7. stuartr32 - S15 Front grooved rotors 909G & rear grooved rotors 906G 8. dazza05 - R33 front slotted rotors 7693S 9. s13rb20det - R32 front slotted rotors 909S 10. Woodys - R33 Gtst front 7693S & rear 908S The following orders are pending waiting payment to clear: 11. simmyb - R32 gtst front 909s X 2 & rear 908S 12. NickR33 - R33 gstt front 7693S 13. rbboy_23 - R33 gtst front 7693S & rear 908S 14. vbevan - late R32 GTR front 7701G Sorry for the delays ! I had a bad day today, cracked my pda phone LCD screen. My mobile is practically useless now till I got it fixed or get a new one But GROUP BUY WILL GO ON!

The following payments & orders are received & cleared... 1. SRB R32 GTR (early) Rear Grooved Rotors 908G 2. Franga R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 3. J'z-R33 R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 4. xolent - (order & payment just cleared as of 8:30am 10/11/2006) 5. MightyAtom R32 GTR (early) Front Slotted Rotors 7926S & Rear Slotted Rotors 908S 6. Duy - Rear Slotted Rotors 908S The following are waiting for payment to clear: 7. stuartr32 - S15 Front grooved rotors 909G & rear grooved rotors 906G 8. dazza05 - R33 front slotted rotors 7693S

Thank's. I will check for any cleared payments tonight. Am a bit busy at work at the moment.

some employers can be sh1t. I've been trying to find another one but haven't got a chance to get interviews... nothing too much wrong with mine except that we're a bit underpaid compared to the rest of the industry and for some how they got away to classify us as clerical admin until last month rather than IT (we do data processing - please doesn't that compute to you as IT?) - nevertheless I've been with the current work for over 4 years, and have seen other people come and go. just waiting to "cash off" my overdue annual leave for 6 weeks then after that it may be my turn of luck to change for a better career...

That's pretty scary... I've got myself a set of rims which is sourced through local T-mart, lucky haven't gotten anything similar but haven't got a prob last yr @ winton & calder... but looks like mine has a slightly bulkier design around the hub, so hopefully it's stronger. And last week I was considering to buy a Starcorp Racing wheel advertised on ebay since i've been looking for something wider than this 17x7.5" I have... Or could it be that your rims (since it came with the car) might have developed stress/fatique fractures over the x years of use, cos you can't really tell how the previous owner treats their car...

pm replied, MightyAtom 4 people ordered so far... c'mon guys, don't miss this out...

The following payments & orders are received & cleared... 1. SRB R32 GTR (early) Rear Grooved Rotors 908G 2. Franga R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 3. J'z-R33 R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S 4. xolent - (order & payment just cleared as of 8:30am 10/11/2006)

ha ha, great video lol.. is there really a next prank that he did? or just retire and teach kids how to drive go-karts...

damn, have prices increased? they used to be around $120-ish, with Phillip Island being the most expensive from memory...

might be their marketing strategy to also help promote the upcoming R35 GTR and by getting more active again in motorsport?

post the link on youtube once it's on! it'll be fun to watch...

Thank's J, will confirm when payment clears, hopefully by tomorrow morning. Anyone else, don't hesitate to jump on board, this may be the last group buy before end of the year, as the next one will not be until Feb at least. So if you're in need for some rotors for a track event in January, this is the time to get one...

The following payments & orders are received & cleared... 1. SRB R32 GTR (early) Rear Grooved Rotors 908G 2. Franga R33 Gts-t Front Slotted Rotors 7693S & Rear Slotted Rotors 908S

At the moment I am going through my inboxes/sent items and replying to those whom I've given quotes to in the past few weeks. If I've missed anyone you're welcome to send another request for a quote. Sorry about that, it's not easy going thru hundreds of pms