SkyKC

I need R33 rear strut tops.If you cant seperate them I will buy the whole rear struts (Both). I need these urgently. please PM , email [email protected] or call me 0421 646466. Cheers Chinthana

350mm position for the both front and rear right? Do I have to move the groove down to set ride height to 355/345? I thought it already set up for 355/345 when got deliverd from jamex? By the way Gary, whats the progress on my standerd strut tops? Cheers Chinthana

Please correct me if this is wrong.... Cheers Chinthana

Guys, Im setting my rride height for 355/345. as per the dust cover and bump stop, not sure where to cut it for it tio suit the ride height. please refer to the picture attached. This pic got it from Garys R33 GTr forum. thinking of cutting 5mm further down where Gary has indicated 350mm mark?

##I got a quate from East Coast Suspensions as followes, is that the normal price for installation? *To fit your springs & shocks , plus front camber & caster kit would cost $450.00. *To fit the rear camber kit to the upper outer pivot points (ie. in the upright would cost an additional $135.00. *For Front & rear wheel alignment ( full adjust ) is $165.00. So All up to $750 ##St George quate for the above for $893 ##Nismo quate me $350 for shock installation $400 for caster and camber installation, and $88 for wheel alignment.so all up to $838 ##Pedders quate me $450 just to install the shocks,,,I didnt ask for the rest hehehe.

Greg, Hi, Did you get this problem fixed? I have the same problem but not because of changing oil, its eventually happend. dont know how to fix it. some say the clutch is in its on last stretch Cheers Chinthana

Hi Guys, Just need to know where I can get these installed in NSW? and how much normaly cost? i)Bilstein front and rear shocks + whiteline springs +standerd strut tops + Bump and dust covers ii)Whiteline Front and rear camber kits and front caster kit iii)Wheel alingment I got a quate from East Coast Suspensions as followes, is that the normal price for installation? *To fit your springs & shocks , plus front camber & caster kit would cost $450.00. *To fit the rear camber kit to the upper outer pivot points (ie. in the upright would cost an additional $135.00. *For Front & rear wheel alignment ( full adjust ) is $165.00. Where did you guiys got these installed and for how much? Cheers

Hi Mike Gary said F4-B46-1873-HOis the correct shock for r33 gts4, if that the case there are no different between R33 gtst and gts4 front shocks.local tech in Blacktown syas this one is wrong for my car, Im really confused actually, but Gary will clear this up im sure. still waiting on some more parts from him, unitl then cant install it. Cheers

Dezz, I found this on forum, "Hi Mike, the springs are 25mm lower than the standard 375mm, so that's 350 mm, then there are 3 circlip grooves 8mm apart. Hence 350 mm - 24mm = 326 mm." But still I cant figur out how to make my setting 355/345 yet Cheers

Sorry Gary, your email and PM is directed to my MS outlook which sometimes act crazy,(if it fails to send a message it will resend it after while) ill try to solve it. Just wanted to post a picture thats why I posted here. Infact when Bilsetein Aus told me front shockers i got is for 2WD not for 4WD and height is wrong, I got panic Cheers

Jamex deliverd me the wrong front shockers on Monday. They deliverd shocksrs for R33 GTST part no "F4-B46-1873-HO" which is wrong since my car is R33 GTS4, I checked with Bilstein Australia, a local tech and few other memeber in this forum which confirmed this. Garry, could you kindly tell me the procedure to return both front shockers to jamex and get the correct ones, according to Bilstein Australia part num should be "F4-B46-2107-HO" (As you know same thing which will fit into R33 GTR). PM sent, kindly reply asap. Cheers

I agree with Dezz, neither I couldnt find any info for ride height for the grooves,I looked in to R33 Gtr forum with no luck either. I got my shocks on Monday and they are currently set to the third groove from the top. -- -- Circlip Groove -- -- -- I need to set the ride height 355/345 (since myine is GTS4). Garry, could you please advise which groove it should be set in to? so once I get my springs and other stuff I can install it. Cheers

mmm good queation, I think since front shockers are shorter than the rear one, it shouldnt be a problem. Im getting my shockers today, let you know how mine is. Cheers

Havent got my cone note or the parts I orderd yet Garry, Sent you a PM, please reply. can you please make sure you send me the con note cuz I want to make sure to be at home when it arrives. Cheers Chinthana

I had the same probelm, I did a wheel alignment and, even after the alignment it came up few times, but it vanished completely now. I dont know what happend but looks like problem doesnt happen anymore....I think its something to do with sences, but the strange thing is 4WD and ABS comes up together .

Garry, PM sent, still waiting for the con note.

Garry, Did you get my PM? I deposit money on Friday, for my order for R33 GTS4 and send you the internet money transfer details via PM.Please confirm. Cheers.

Garry I just plcased the order, payed in full via internet money trasfer, PM sent

PM Sent

Garry are you back to work now? hope you got my PM's,................................

YEah Garry is away till thursday, no replys to my PM's either,,,,,,,oooooooooooh cant wait to fix my suspension problem soon,

I will be buyng Sydneykid's package........, For$1500, my headache will be gone for ever. no point of searching for standerd suspension as they are hard to find for R33 GTS4...................

Oops I moved to r33 gtsts thread as you said Garry.