mad032

Looking for door rubbers both sides and interior mirror triangle

On the back of brake pads the are two metal plates which are kept whilst changing pads and clips to hold them there my question is ; is there two clips per pad meaning there is 4 clips per side or not? have i lost two? Cheers Ryan

just be careful what you buy best bet is to use efi hose not silicone or fuel line as it doesnt hold boost well and when it gets warm under vaccume it will suk in on itself. Personaly i've tried heaps of different sillicon hose so i could have the blue vac lines... looks good but i have never found anything good enough

^^^^^^^ Cheers Flick! glad to hear you didnt crash it. Well im guesing its gonna be a regular occurance so i will c ya round!

looking for the cap with the rubber for the clutch resivor, vented gaurds, driversside door in perfect condition and all door and body rubbers. `Cheers Ryan

Tonite on the way home from work on south road at bout 6:15 once again saw flick in the thirty two looking beautiful as always!!!

thanks mate but never again

Vented gaurds new or perfect condition that there will be no problems with fitment and alignment. Cheers ryan

looking for a perfect condition drivers side door for a R32 GTS-T preferably white.

was this mounted on your car?

Item: Lenso 17"rims Condition: good minor gutter rash Price: $600 To Fit: skyline stud pattern Location Adelaide Contact: 0415668750 Comments: pickup prefered Two tyres 25% the other two are 75% Thanks Ryan

That would be the one, white with black impuls. Its a bn front and rear bar and origin skirts.

on the way home from work tonite saw Flick at the intersection of south and henley beach road, car looked clean as always. whish i could say the same for mine, i've been slack as lately

^^^ No im not refering to the aac valve. As i said the cold start bypass valve which is located next to the intake cam cover just ontop of your fuel rail nearest to the firewall. It has a hose running to it from before the throttle body on one side and another from the intake manifold and has a small plug on it also. My setup is all custom but from memory this is correct. As said above it also wouldnt hurt to pull your aac valve off and give it a clean out there is a thread in diy which will help alot.

if i d/c a hose from the plenum blow air into the system should i get air out of the NC port of the actuator valve, keeping in mind that it is setu as an external gate? Cheers Ryan

positive that the plumbing is good, we have come up with another theory, that maybe the fuel pressure reg isnt working becoz its possibly leaning out as it comes on boost. We did a bit of a test today and if i let the revs creep up slowly to 4500k then give it a bit it isnt as bad but if i nail it at 3k and let it try and wind up it hates it. Any thoughts on this.? by the way the pump is all good as it is a 5.7ltr pump and yet to check the filter

Item: Stock suspension Condition: good Price: $400 ono To Fit: HCR32 Location: Adelaide Pickup only

Thanks mate i will see how i go. You say that it will cough and splutter carry on but berfore boost will it drive ok? mine is fine off boost asin accelarating up to 4k

i had a simalar problem that turned out to be the cold start bypass valve. When your car is cold it opens and lets air bypass the tb therefore gives the engine slight revs to stop from stalling. It also is what kicks the revs up when you turn your aircon on so that maybe one way to test it!

yep i have been right over everything to do with vacume. any ideas how to check a cooler fo blockages? i did find bits of rubber from a perrished wastegate vac line in the plenum.

I recently blew my intake manifold appart and have sine had it welded back together and i have fitted it and the car starts perfectly but when the turbo starts to spool it stutters and wont build up any boost even if i hold the pedal down it wont pick up. i know this isnt the greeatest description but i dont know how else to describe it. Cheers Ryan

saw FLICK at the hyway in drivethrough at bout 930 car looking sweet as always

cool glad to hear it, just wanted to make sure. have you left the NO port open? from what im told that is where it bleeds air out of. Also what turbs you runnig?

Item:stock suspension Condition:good Price:$400 ono To Fit:HCR32 Location:Adelaide Contact:0424984471 Cheers Ryan