mad032

I have an avc-r installed and have made up a plate to go over the ash try hole but i wish to have someone fit it profionally into the hole so it sits flush with the rest of the dash. Has anyone ever done this in an R32 in Adelaide? If so where. Cheers Ryan

ok now i have fault #22 aswell..... anyone know what this is or how can i access the codes list?

do you know where the outside sensor is located and how can i test them. i have the same problem as described above my ambient temp is always showin -30.... this means? Ryan

Reason for selling: Too much overkill for Rb20 too laggy. This setup has now only done max of 6,000 kms since fitted and dyno. For sale: Garrett 3540 (.7 compressor housing, 600hp core, .64 exhaust housing) s/s highmount manifold s/s custom dump pipe with bellows for heat expansion Tial 38mm external gate turbo intake from afm to comp (80mm to 100mm) braided oil feed $2500 or 3000 with s/s exhaust exhaust includes exhaust control valve and rear muffler. *some pics available* Cheers Ryan

since i do not have a manual and have never done this before, how do you reset the cc and do you know where the outside temp sensor is located?

i have just done a diagnostics on my c/c and found error#21 and #25 i think these are the one in the dash and the one for outside temp but where is the outside temp sensor? and does anyone know if these sensors can be fixed?cheers ryan

Hey all i have code #21 and #25 come up when i do a diagnostics test can anyone tell me what these sensors are and how to fix or replace them. cheers Ryan

R32 gts-t: custom inlet plenum Q45 900mm t/b GTR fmic Garrett 3540 turbs power fc avcr 550cc injectors 3" s/s exhaust 240 rwkw @ 1.2 bar

pm please

What have the rocker covers been sprayed with mate?

FOR SALE: Garrett 3540 external gate turbo (.7 comp, 600hp core, .64 exhaust housing) custom turbo intake fron afm to comp (800mm to 100mm) Stainless steel highmount manifold custom s/s dump pipe with bellows for heat expansion Tial 38 mm wastegate im selling this setup as it is too laggy for RB20 but as above woould be nice on RB25. $2500 or 3000 with custom s/s exhaust and muff Cheers Ryan

Yes most deffinatly, its a simple case of overkill. The Rb20 being a 2.0l doesnt create enough engine gases to spool the turbine up until it reaches a high rev range where the engine is producing more gasses. With the 2.5l obviously it produces more exhaust gasses and does it quicker. Hence the reason for less if any lag. Cheers Ryan

The reason for selling is that this setup is way to laggy for an rb20 and has done no more than 6,000 klms since fitted and dyno. For Sale: Garrett 3540 External gate (.7 comp, 600hp core, .64 exhaust housing) Custom s/s highmount manifold Custom s/s dump pipe with bellows for heat expansion Custom intake from afm to comp (80mm to 100mm) Tial 38mm external wastegate $2500 or $3000 with s/s exhaust Cheers Ryan

FOR SALE: Garrett gt3540 (.70 comp, 600hp core, .64 exhaust housing). Custom s/s highmount manifold Custom s/s dump pipe with bellows for heat expansion Tial 38mm external waste gate Custom turbo intake pipe from afm to comp (800mm to 100mm) Also if to be fitted to R32 i have a s/s 3" exhaust with ecv and rear muffler. $2500 without exhaust $3000 with exhaust Cheers Ryan

Bolt it straight on but obviously you need other supporting mods. Ryan

just need oil feed and a extended oil return and water lines. I might be able to help out with all that as i will have no need for mine once it is sold.

4400 is high. Yes it would be much much better on RB25. Thats my bad mate this also comes with custom s/s dump pipe with bellows after the waste gate to save cracking from excessive heat. Cheers Ryan

on an RB20 which is what i have it doesnt come on full boost till 4400 hence the reason im selling it. This is really the only picture i have.

Cheers!!!

i have all the same mods making 240rwkw on 1.2 bar

all of this has not done more than 5,000 kms since fitted and dyno. For Sale: Garrett 3540 external wastegate (.7A/R, 600hp core, .64 exhaust housing) Intake pipe from afm to turbo (80mm to 100mm) Stainless steel highmount manifold Tial 38mm external wastegate and if it is to be fitted to an R32 i have a stainless steel exhaust tig welded with ecv and rear muff $2500 $3000 with exhaust Cheers Ryan

BUMP!!!

Full boost was at 4400 running 1.2 Cheers Ryan

Reason for selling: Too laggy for my liking but would be perfect for a RB25. For sale: Stainless steel highmount manifold Garrett 3540 (A/R.7, 600hp core, .64 exhaust housing) Tial 38mm external wastegate Custom stainless stell dump pipe made with bellows for heat expansion. and if its goin on a R32 i have a 3" S/S exhaust with a ecv and rear muffler to go with it as a complete bolt on unit. Everythig listed has done no more than 5,000 kms since fitted and dyno. $3000 or $2,500 without exhaust.

bump