SMiTHBRo

does anyone know the part number for an rb20det clutch master cylinder? i was sold a P10148 by repco, think it might be for a 32 skyline

after converting my cefiro i learnt that there are three types of manual nissan crossmembers, marked with either A, B or C. A & B has forward arching mounts, C has backward. I needed a C for my car, going from auto to manual. Nissan used different floorpans between the auto & manual versions of their cars, so a manual crossmember from the same car might not fit. Hope this helps

hey guys i just converted my cefiro from auto to manual clutch pedal & all cylinders are in but i'm having one problem. it seems as if the pedal has resistance for the first 5cm then after it just pulls to the floor and doesn't return. any ideas?

does the front pipe bolt onto the top of the turbo?

are u willing to seperate the dump pipe?

ok thanks i'll try an s13 crossmember

for sale i have a standard rb20det turbo from an a31 cefiro rb20det. has some shaftplay - $150 i'm located on the north side of brisbane shoot me a pm or add me to msn [email protected]

hey i have a few cefiro parts leftover from my conversion standard suspension struts for s13/a31 cefiro $50 drivers side chrome headlight - $80 drivers side guard with a few minor dents - $50 rb20de & 5spd automatic gearbox - $300 (willing to seperate) pickup only! trust 500x300x50mm intercooler pretty poor condition could be repaired - $50 2 x ca18 teardrop s13 stock rims with legal tread - $50 2 x steering wheels $20 each, 1 standard s13, 1 black sports wheel with sun damage and i have the remenants of a manual a31 cefiro halfcut....contact me if you need anything specific contact me on here via pm, add me to msn [email protected] or call my mobile 0418708307 all parts are located in gordon park on the north side of brisbane. pickup preferred.

hey i am converting an a31 cefiro from automatic to manual. what gearbox crossmember should i be using? i am converting my car using a manual a31 halfcut but the holes for the bolts to mount the crossmember to the car are off by 30-40mm. any help appreciated

hey i am converting my a31 cefiro from automatic to manual using an RB20DET 5spd cefiro halfcut. the engine and gearbox have been dropped in however i am having issues bolting up the gearbox crossmember to the car. it seems as if the gearbox needs to be about 30-40mm backwards for the holes in the crossmember to line up with the car. should i be using a different gearbox crossmember? someone has suggested i use one from ca/sr s13. any help is appreciated

hey i've got a 5spd auto & i'm in brisbane let me know if you're keen!

where are you located? interested in motor package & uras kit...you have a pm