Hi mate, You'll find its about 70 MM wider, so you have to Cut and shut it down the Middle.
I only know places that do these in the UK, not much use to you....but have a look
http://www.knight-racer.com/nissan.htm
That one has a dip in the top centre and makes the hood on a GTS look like its open slightly.
Chop the top rail off and fit stainless mess behind...looks better, IMO
there are two on the uk skylines...they are £50 pounds dont know what that is in Aus dollars....but its gonna be more expensive than finding one there.....but if you want it i could get it and ship it to you.
Let me know
All you need to know is here read thru it covers everything its easy....hardest bit is the door switch light....unreal....AAARRRGGGHH
http://www.skylineowners.com/forum/showthr...ght=dash+lights
Yes you do have to take the whole dash out and more....but i had never done it before either really easy took about an hour....all the dash plugs only go in one way and one fitting so no worries there.
the bulbs i got from Ultraleds in England. will post number later
I did post a link on here a month ago from the UK site telling you how to do everything inc the rear defrost hazard switch and the A/C and Clock
also the Auto window switch in the door.
Blue works well....green is not to good as it makes the needles almost invisible....its al about light spectrum with the red needles.
try this again....
http://www.skylineowners.com/forum/showthr...ght=dash+lights
I doubt it, but hey buy one and try it.
regular 180 degree LEDS are bright enough, it looks a little patchy but believe me its not....really easy on the eyes at night too
white LEDs in the needle holders will make the needles brighter but im happy with it.....phone camera pic does not do it justice.