Peter Behrens

Hey Dude, How about a brand new re-production R33 Gear Stick Knob? The knobs I make have more benefits and features on top of the stock knob as:- *** Looks and Feels exactly like the stock knob, but has more *** Numbers that won't wear off *** A Knob that won't peel As Bigpond cant talk to SAU at the moment, if you can contact me on this email address I will send you some pics, [email protected] Peter

Try Black Needle in Cranebrook on 47 77 5566 ask for Mark. I've used him before and does a great job with very reasonable prices.

Please see your Private message and email me direct if interested

As per your request have sent you a personal message. Please see it. Yes we are in Sydney and will come and get it!

Hey Guys & Girls; Im after a 96 (i think) dash facia for my 94 r33 as the vynl paint is scratched and coming off. Im after the facia that has like a very fine sand blasted effect to it. I also need the gear stick surround as well Thanks guys and girls

The bumper and side skirts are usually made out of a plastic called ABS. There will be some form of branding on the inside of the product confirming this. Just look for the ABS lettering. The plastic is injection moulded and can be repaired using any quality polyester resin two part system(resin and catylist) The trick is to get the oriniginal parts super clean with a good quality acetone. Just remember : no clean, no stick ! Then you need to get the original parts back together and find a way to hold them there then brush a thin coat of catylised polyester resin on the area, wait till it starts to gell . Then apply a layer of fiberglass or another very strong material on the gelling surface ,squeezing or rolling it into place. the let it cure completely. To finish it off mix up some more resin and paint it over the rest of the exposed fiberglass and let cure. Now If your head hasnt exploded by now from all that info you should be right

Trev; Ive noticed some discrepencies in the Wiseco cattle dog In the Rb30 section the rod length in inches is wrong(if you divide the mm rod length into inches you get a different number) But the most concerning thing is in the Rb 25 section where the dome volume is stated as 14(I assume cc's) but if you look at the note at the extreme right the kit number is coded with a 1,2 notes number. If you go to the very bottom of the page you'll see the 1 coding is of not much concern but the 2 coding states that the piston is a flatop with no flycuts for the valves???? That aint gonna work. Any chance you can email them for clarifcation ? Let us know Peter

Hey Im after a set of forgies for my Rb30/25 conversion whats happening with the order. Let me know. Ive been in touch with the people at rocket who stock the Aries forged pistons and they need both hands to find their own asses. I spoke to three different guys and got three different prices from $1047 to $1205 and they said theyed be in next week , early April maybe ??? Making further enquires the Aries pistons tend to have failure problems after 24 lbs boost ??? Jnr24 what kind of rings do the Weiscos come with are the ductile iron or chromemolly ? Im pretty keen to move on these if they are the right ones as my Rb 25 is on it s last legs. I got just about every thing else ready to go and the pistons are holding me up ! Thanks Dude

Bryan; I got brand new reproduction original knobs for sale. $50 bucks and i'll post pack one to you Let me know if your interseted. ( Do a search in for sale parts and access. on gear knobs i got pics there)

I put my boost guage into the parcel shelf thingie under my cd/radio with my turbo time so i can close the door on it so no bastard can see that i got on and try and flog it

Joe, This is Tereza, Just got home so I just got this,Can you call me 1st thing in the morning or email. I deleted your email+phone numbers. Pete will definately still take them, please send pm to swap mobiles or such, or if you have our numbers please call. Thankyou Tereza

Where abouts in Sydney are you, so I can have a look at them?

Hey Dude; What size are they ?

benm; Just a note on the master cylinder brace. In the recent past I had a close look at the ones available on the market. Including the ones that are incorporated on the strut tower brace and wasnt really impressed. Most looked like an after thought. So in the end i designed and built one myself out of a adjustable hiem-joint. The after market ones seem to rely on the two small mounting bolts on the strut tower to take the entire load of the flexing or the firewall and master cylinder. These was, as far as i could see, still flex because the master cylinder pushes foward and slightly inward towards the center of the motor. to eliminate this I built a bracket that uses the strut tower only as a mounting point and the load is taken by a bracket that raps partially around the strut tower. It was a bit of a bitch getting the geomtry right but worth the effort in the end.If you need a squizz at it let us know. Hope this helps Peter

No I am from Sydney, We have an excellent overnight postal system though, that can have them to your Melbourne friend overnight!

Have 4 x RB26DETT 444cc injectors out of a low kilometre GTR. Asking AUS$ 250.00 + postage. if interested please let me know. Regards Peter.

Hey Booster I still got 'em

IM INTERSETED IN THE ENTIRE BODY SHELL. WHAT CONDITION IS IT IN PLEASE AND HOW MUCH.

From Nissan, a new Skyline knob was over $200.00 so then I thought to develop my own. It looks identical to the original, but not leather. So it cant wear and tear. Compared to an aftermarket Knob at the same price of $50.00 those dont look anything like a factory original, and really ruin/downgrade our unique Skyline look. So what would you suggest one would be worth ?????

I still got em guys and girls! Carnt believe nobody needs a knob?

Due to unfortunate accident I am now in the need for a new/used ingood condition GTST-R33 Skyline complete shell to transfer previous running gaer into. Help! Help! Any offers!!!

Hey Rick; Dont know if this will help, but I converted my non adjustable caster rods myself. It started with me looking to replace the original bushes and after visiting a few local parts shops and recieving a lot of blank stares I started to ring the Nissan parts suppliers. I found that adjustable caster rods were about $300-$400. I knew a little about engineering and went "where?" Finally I went to my local parts supplier and asked him about the bushes. He took one look at them and said they looked very familiar and produced a Nilothane parts book, did a few measurements and found that one of the suspension bushes out of a Magna was almost identical, the outside diameter being slightly smaller .Two bushes cost $88. I then took the caster rods to an engineering shop and enquired about cutting, threading and making the adjusters for the rods as well as sleeving down the bushes to fit. At about $50 -$60 bucks an hour it took them about 2 hours to complete. I also made sure they used high grade steel for the adjusters and not mild steel. Not a bad saving in all if you want to go through the exercise. I really got a bit tired of the parts people finding out that you drive an import car that you have money to throw away and treat you like a bozo. Hope this can help Peter

Pictures will be available within the next few days, just had to organaise a camera and the stuff to do it.

No, they are a plastic resin moulded of an original gear knob. The look and colour is exactaly the same as original.

Pics coming up in the next few days. Trying to get camera set up. Look exactly the same as the original Nissan knobs.