Blackzedder

Hi - Still got the R33 Series 1 igniter?? Call or text 0418798165. Cheers

Call me 0418 798 165 if you still have them.

Hi mate PM or text me 0418 798 165. Cheers

Still got em buddy? Cheers Neil

Hi Limited Had a set of these, but Manarays don't have a good clear coat - cost me a packet to get them stripped and recoated. If yours are OK I'm interested. Are wheel nuts included. Could you tell me what the offset is (stamped on the back of the wheel) +35 is the only offset that will work on my V35. Best thing is to call me on 0418798165 so we can work out freight cost, price, etc. Thanks - Neil

Hi Bourbon Rears look good. - I've got a V35 coupe (same as your pix). The fronts don't seem to come out any further into the wheel arch than the stockies. But the wheel would extend inwards and extra 28mm. Do the fronts fit without using a spacer??????? Cheers Neil

Hi - I have just had a spare key supplied by a local locksmith for my V35 coupe. The key doesn't have the remote function but it has the transponder in it so I can enter the car (which turns off the immobiliser) and start the car. He also supplied a valet key. I did not have a key code, he has a reader which produces a serial number which then can be programmed into the transponder key. Total cost = $125. However if you lose your one and only key and don't have a key code, you can expect to pay about $1300 for a replacement. At least that is what it costs for and X-Trail which uses a similar security set up and key codes. A word of warning - don't hide your spare key under the car (especially in a magnetic box)as most thieves can find it in about 30 seconds with a mirror and LED light. And the magnetism will affect your transponder inside the key. I'm located in regional SE Qld so most metro cities should have similarly equipped locksmiths getting around the place. So don't get ripped off. Cheers - Neil

Hi. I'm after 18 or(prefer 19" stock V35 coupe wheels and tyres (replacing the 17" stockies) or 350Z Track 5 spoke rims. Will arrange courier if required. Call me on 0418798165 would be best contact.

Hi. Call me. I have a set with Bridgestone Potenza RE 050s and I'm not far from Sunny Coast. 0418798165

I would make an offer but I'm not sure about the offset on the front. I have a V35 coupe which has +30 offset but I think the sedans have +45 or thereabouts. I may not have enough clearance on the inside of the wheel to suspension. If you know they will fit let me know. 0418798165. Cheers

Skyline R34 GT-T turbo coupe 59,000 km Tiptronic auto Silver Located Hervey Bay Queensland RWC Registered till 6/09 - Plates do not go with the car $19,999 with stock wheels $20,999 with 18 x 9.5 & 18 x 8.5 Manaray VR5 alloys (see pix) Contact 0418 798 165: Only modifications are the Nismo exhaust which it came with and a manual boost controller and gauge which I had fitted to improve performance. (set at 10psi) Imported by Brad Bottcher Imports and complied by AJap Compliance. Only had 44,000km mileage when imported. Was Grade 4.5 B. In immaculate condition, no pin dents, only a few stone chips on the front thanks to Qld roads. Serviced every 7500 km with quality oil and full filter change. Perfect interior, nice Panasonic stereo. Reduced price from $22,500 as I have purchased V35 and I must sell. Have a look if you're serious, you won't be disappointed. Images:

Where do you live? I want to try them on my car. I've got cash.

Hi Checking out an R33 tonight to compare mounting points etc. Muffler is the only prob. I'll let you know soon. Cheers Neil

Hi I have an R34 GTT coupe. Do you still have the tow bar. If so, I'm interested. If not, if you have sold it I would like some pix of it off the car so I can build one. Cheers Neil

Has anyone seen a towbar that would fit an R34 GTT 2 door. I have tried to buy one but no one builds one. I am going to the wreckers tomorrow to see if anything would be easy to adapt. The problem is the large Nismo rear muffler. The righthand side is easy but getting over the muffler is the prob. I have pix and a plan for a home built 300ZX tow bar which I am constructing for my Zed. However, It is totally different underneath. Any help (or pix) appreciated. PS: I need it to tow my boat, and my mate's jet ski, so 1000kg rating is all I need. Thanks Neil