FAT_3L

wat do u clean on the actual air flow meter?? getting the air flow cleaner but dont wanna stuff anything. A DIY thingy would be good...

it went back 2day to what it was doing b4 at 3000rpm and is only under load. the tune hasn't been checked but does smell fuely sometimes on idle. and wanna elinimate the hesitation b4 it goes onto a dyno. i pulled the plugs off the coils while running and each time idle changed so im assuming coils are fine, and the cars runs on 6 cylinders! will get some air flow meter spray and give it a clean and that k&n stuff for the pod and will get a new fuel filter while im at it as i haven't done that in a while. any way to test the igniter without swapping one over ?? should i try reset my comp to see if that helps ??

hi people, i know some will tell me to search and stuff and ive been searching for a while and had no luck but there is so many threads Anyway i have a r33 series 1 stock, beside fmic, pod, 3 inch cat back, stock boost.. which ive been having a few problems with. The car first started playing up a while ago and havent had time to source out the problem until now. The car used to boost fine all day every day until one day i gave it a bit and it hesitated and than all of a sudden pulled through to redline. Was like this for a while until all of a sudden was driving it and i couldn't come onto boost at all and the car started splattering around 3 grand and couldn't get any higher revs or see boost at all. Anyway it only plays up when its warm. will drive and boost fine when its cold thou. My brother had the same problem on his series 2 engine and it was the coils. I have replaced the coils with second hand ones that were working fine and now i can boost the car again til around 4 - 4.5 grand and it splatters and pulls to redline once again. I than thought of plugs so i went to the local shop and got a set of bcpr6es-11's after i searched on here about plugs. I put them in without gapping em down because im still running stock boost but didn't help. The plugs that were in it were the hks s40i ones that i searched for and they are a heat rating of 8 while the new ones i put in arn't, could this be a problem. Has anyone got any ideas?? Any ideas or help will be appreciated Next will be, AFM im guessing but i dont know heaps about the lines?? Thanks

are the coils brand new

pm me a price seperatley please also delivery aswell to 4740

hi ppl, i might be chasing a few items soon for my skyline. please let me know if u have any and wat condition and price. 1) Struts or aftermarket suspension front and back 2) Drivers side windows buttons 3) Coilpacks Thanks

have you got the buttons for the windows from the drivers door series1.if so all work. Thanks

Will be moving next week and getting tune re-checked on Saturday hopefully. Will take car too qld with me if i have to but it is registered and engineered in NSW so is better off down here. Throw some more offers!!!

Make:Holden Model: VL Milage: 8000kms Transmission: Manual Colour: Blue over Silver Location: Newcastle Complied? N/A RWC supplied? Yes Currently registered? Yes Price: 18k ono Contact: Pm me or email Comments / Modifications: My Calais Turbo Here goes: Car is always garaged and covered 1986 Series 1 Calais Was originally an N/A auto but has been converted. Car has rego till march and is FULLY ENGINEERED (front to back) ($1200) Exterior: - Had a bare metal respray blue over silver (close to turismo) - 18inch Stalker Rims with nexen tyres - 3 inch exhaust from turbo back with high-flow cat and canon (dump heatwrapped) Interior: - Standard Series 1 Calais interior in blue - Monsta tacho in console - Boost and oil pressure in chrome cups on dash - Turbo timer - Stereo Pioneer head deck and 6x9's Suspension and Brakes: - Lowered but not sure how much (pedders) - Brand new adjustable panhard rod (nolathane) - VL Turbo brakes all-round with 1inch master Fuel: - Bosch 450hp external pump - Rx7 550cc injectors with extra but not connected - Adjustable fuel regulator in engine bay - Custom Fuel Rail Engine and Driveline etc: - Rb30et from skyline rebuilt with forged arias pistons, standard rods etc fully balanced about 8000kms ago. - Brand new genuine nissan lifters - Contolled by microtech ltx12 (handcontroller) - New Individual coils (hec715) - Head has been port and polished and stage 3 crow cam fitted which is fairly lumpy - T04 turbo (i brought off a mate so don't know specs, perfect and boosts about 2800rpm) - 48mm wastegate with screamer (turbosmart) - Megasonic blow off valve (turbosmart) - Boost controller (turbosmart) - Custom Plenum - Intercooler (hidden behind bar) - Catch can - K&N pod - Chromed - Mx7 gearbox with short shifter (rebuilt) - Custom 500hp clutch by 'carters clutch' - Brand new 2-piece tailshaft ($700 alone) - Rebuilt vl turbo lsd (standard gears) Made 362hp on 14psi. Car will be better with 3.9 gears and electronic boost controller Engine made 350rwkw on 22psi on pump with a decent tune Driveline has all been rebuilt and no dramas (clunks, whinges etc) Im not in a hurry to sell so please no stupid offers but would perfer to sell it before i move Theres probably more to the car but thats all i can think at the moment... Any questions please Pm me... No joyriders and please keep your comments to yourself if you do not like or agree with anything in this post.. Thanks Images: Pics: Date has not been set properly so discard the date in the pictures http://i30.tinypic.com/2qi4cck.jpg http://i32.tinypic.com/amxojn.jpg

have you got the part with the window buttons for the drivers door??

hey mate do you have the drivers side door part with the buttons for the windows etc??

a mate probably would swap u. he has a frontera, however they spell it... get back to me and il hit him up if ur keen as he is looking for another skyline

nice car man, like it

r33 rb25det

Price is neg.. Will also swap for adjustable coilovers, msports kit and drift wing, etc. Let me know what you have. The tyres are pretty much brand new aswell....

anyone??

stil keen if u get a price on transport

hey mate if you r interested in seperating the 5 speed conversion how much for just box pm me price thanks

Hi mate, il take that for that price... Consider it sold but i need to get it transfered up to newcastle nsw. Is the loom there aswell or just a complete engine?? PM Me

Item: Blitz BOV on pipe Condition: Used for 6 months but in excellant condition Price:$220 To Fit: Any Location: Newcastle Contact: Pm Me Comments: The item was brought brand new about 8months ago but only used for around 6 months. i pulled it off to put cooler on and never bothered to re-install it. I still have original box aswell. We all know what they look like but if u really want a pic il post some later..

Price is $1100ono If you think its to high just PM me what you are willing to pay for them and we will go from there. Also have a blitz bov on pipe in excellent condition used for 6 months for sale for $220...

Thanks mate you are spot on.. they are the sizes that you just mentioned..

i just installed my intercooler aswell and put a nipple after the cooler next to the head but the boost went from 6psi to 9-10psi without touching anything else. is that meant to do that?? Also i had a bov that i took off, what do i do with the line that was going to that,block it off??

i will get the offset tomorrow afternoon once i pull the rims off for the new rims to go on.. PM me if u want the offset and il pm you back. Thanks

hi people, i am debating on getting some 20's for my skyline, and i was wondering if i will have problems with scrubing or anything and wat will need to be upgraded if they do.... Thanks