E-Z

have these up for sale, they have had some repairs on the back barrells welded up. they dont hold air, but i beleive this is due to improper resealing the 3 peice rims after paint, as even the un repaired rims dont hold air. good street sizes with low disk rear hubs, and bigger brake clearence front hubs $550 with good 225 45 fronts, and bald rears 0450929227 sunshine coast need new paint and clear peeling on the lip

sunshine coast, 0450929227 selling my ecu, its a mines version. made 306rwhp on a standard engine, with exhaust (forsale too) front mount and 16psi loom is average works fine but has quite a few broken plugs afm is in working order $500 the lot also have perth performance castor arms, adjustable $125

so i have a TT subframe, gtr diff and 1 piece tailshaft to suit manual 2+2. is adjustable and the diff is in great condition only thing not adjustable is LCA price is 1k for the rear cradle assembly Need cash so feel free to offer 0450929227 Included is. Slotted rotors, calipers, 5 stud hubs, gtr knuckles, axles, gtr diff, 4.1 ratio. Adjustable camber, toe and traction, also has stock arms. 3 point adjustable sway bar, ground top mount bush to raise the frame 6mm and alloy lock bushes. Urathane diff mount also 1 peice tail shaft to suit 2+2 manual z32

price in the 17 x 9.75 +25 please.

trades? plus cash my way

Item Summary: 1988 NISSAN CIMA cedric, manual, badass. cheap Location: QLD: Sunshine Coast Postcode: 4575 Asking Price: $7,000 Condition: Used Reason for Selling: need cash Delivery Methods: PickUp Contact Info: 0450929227 Extra Information: ok so im selling my beloved cima. its a 88 Y31 with z32 TT engine and driveline, converted to single turbo with gt3582 running nistune modifed ecu, external wastegate modified off the rear housing for accurate boost controll. full stainless intercooler pipe work with a good tube and fin intercooler. stock fuel pump feeding surge tank with twin VL pumps, malpassi 1.9:1 fuel reg. 3 inch stainless dump and front pipe, stock rear exhaust, i have twin pipes and the stainless pipe to finish the exhaust. has recaro copy drivers seat which is rubbish, interior isnt the greatest but that never concerned me as i was building this to drift. i have almost a full car in spare parts to go with it, INCLUDING headlights, taillights, subframes, interior pieces, front panels. it has a 1 piece custom tailshaft, r200 long nose LSD ($$$) rear s13 racing logic coilovers. bigger rear swaybar, GAB front coilovers with s13 suspension, extra lock spacers etc 17x8+8 and 17x9+20 weds farmas rims. tires are good on front, camber worn rear. can negotiate RWC, car is not perfect and still has some tiny issues like doesnt like ideling when warm above 500 rpm, and 2 spots of rust in the rear arches i am open to swaps only with cash my way a looking for a S13 manual and about $4k my way or similar PRICE $7000 FIRM i have more then likely missed alot of mods and info so if your interest PM me and we cann arrange a inspection and i can take you for a drive. Ryan

Item Summary: Y31 cima manual VG30det Z32 running gear. strong Location: QLD: Brisbane Condition: Used Reason for Selling: have a wedding to pay for Asking Price: 8000 Delivery Methods: PickUp Contact Info: 0450929227 Extra Information: ok so im selling my beloved cima. its a 88 Y31 with z32 TT engine and driveline, converted to single turbo with gt3582 running nistune modifed ecu, external wastegate modified off the rear housing for accurate boost controll. full stainless intercooler pipe work with a good tube and fin intercooler. stock fuel pump feeding surge tank with twin VL pumps, malpassi 1.9:1 fuel reg. 3 inch stainless dump and front pipe, stock rear exhaust, i have twin pipes and the stainless pipe to finish the exhaust. has recaro copy drivers seat which is rubbish, have the stock seat also. interior isnt the greatest but that never concerned me as i was building this to drift. i have almost a full car in spare parts to go with it, INCLUDING headlights, taillights, subframes, interior pieces, front panels. it has a 1 piece custom tailshaft, r200 long nose LSD ($$$) rear s13 racing logic coilovers. bigger rear swaybar, falcon front springs, can convert to S13 front suspension apon negotiation with sale. 17x8+8 and 17x9+20 weds farmas rims. tires are good on front, camber worn rear. car has just under 6 months rego and can negotiate RWC, car is not perfect and still has some tiny issues like doesnt like ideling when warm above 500 rpm, and 2 spots of rust in the rear arches i am open to swaps only with cash my way as i need to pay for a wedding, looking for a S13 manual, prefer CA and about $4k my way or similar PRICE $8000 FIRM i have more then likely missed alot of mods and info so if your interest PM me and we cann arrange a inspection and i can take you for a drive. Ryan

no these use a r200 long nose, same as a hr31.. brakes are basicly r33 na brak, havent checked padsyet, they are not sr brakes, they use the same size rotor but with a larger 2 pot caliper. i have been playing since last post. i am just about to bolt s13 front hubs and shizz in with s13 coilovers. these brakes are actually a really good upgrade for stock sr rotors. and bolt straight on. woo go me,

ok selling my stock turbo due to upgrade, op6 rear housing, good for rb20-25 direct bolt on. would suit sr or ca also looking for $350 turbo is off of this motor 0450929227

So thinking of parting out my car to buy something easier. Whole car price $4500. Main parts of interest perfect na box with clutch and fly $700 custom cima 1 piece tailshaft $300 blown bare na motor $150 unknown condition tt motor $600 cima vg30det manifolds single turbo! Fits na and tt motor. $300 na ecu and loom and tt afm $300 umm maybe more parts just ask rolling cima shell $2500 long nose r200 LSD diff on. Cradle with axles, lca, 5stud hubs the whole rear end $1200 16x8 +8. 16x9 +18 ralings rsd dish rims $600 and I dunno I have a whole spare front end for the cima aswell. 0450929227 just eoi ATM SMS or pm shotguns if interested. Ryan

just gonna bump this up. im keen for a brake swap too. if something wll bolt over? i know ts got a different mounting space to regular s13, r32/33 brakes

Bump still for sale. Look fat under small cars like 32 or 5 stud sil/180

Sold

yep sorry, thanks mate, very quick!

yer it sucks but never mind

ok so i just bought these and they have no chance on fitting what i want, so im just gonna try move them along, $600 ono pair

found some thanks

im chasing some valve stem seals for a series 1 rb25, if some one has a VRS kit and dont need the seals or never used them, or can get them for me cheap, please let me know 0450929227 or pm Ryan

I want $14,000 or near offers no swaps I am willing to negotiate on price If someone wants it without the roady Not sure if I can remember all mods but I’ll try, 1992 R32 2door GTS4 100,000k’s Engine done approximately 2500K’s Full Vertex style body kit 18” x 8.5 front 18” x 9.5 rear 235 all round Tein HR coilover’s GTR front and rear seats Front mount GT3540 turbo Turbo beanie S/S exhaust manifold External waste gate with screamer pipe Full 3” S/S exhaust Modified intake Sard BOV Split fire coil packs Fully reconditioned head 1.2 commetic head gasket 40thou over CP forged pistons Forged spool rods King bearings STD ARP head and big end bolts/studs N1 oil pump Injectors and PFC with hand controller Currently making 216KW at all four wheels on 16Psi, it needs Z32 AFM for more power Tuned and compression tested be APC in Brisbane

what happened to this?

bump

used to, when i was younger in NA cars while playing up in the back, but in my turbo worth money cars, no way

bump

this is s single TT turbo...

Full Set: Rawlings RS-D set (4) 5x114.3 16x8 +5 and 16x9 +18 staggered so they sit the same. fronts have .. -Yokohama Advan Neova AD07 205/55R16 80% and rears have some 205/60/r16 50% treads, wheels stick out the guards on my car but 4.2 degrees camber keeps them in. the clear is old on the dish and could use a tidy up, but these are great rims, 3 piece with good offset and widths. asking price is $700 ono. LOOKING FOR FAST SALE! 0450929227, or pm here! PICS!