stubi76

Don't really have any pics yet cause I haven't picked up the 33. I can put some up of the parts tho I guess lol.. Yeah it should be fine in the 33, I just have to make sure I stick to it.. This motor has been mounted in the r31, a 180sx a VL and now goin in this.

also have 50mm alloy radiator with BA twin thermos, walbro 550hp intank pump, power steering cooler, Haltech sprint500, and MSD 6A ignition setup to go in.

Hey, I originally had this setup in my R31 but decided it was time to upgrade and get something with better handling, so stripped the r31 and scrapped it.. Got offered my mates S1 gunmetal grey 33 for a price I couldn't refuse so I pick that up in 3 weeks... Currently it just has intercooler, Hiflow turbo, 3" exhaust, microtech ect and puts out 180rwkw... But I want more.... So against all the haters on here about SOHC, I'm putting my setup into it cause it's already done, and itll be abit different... So this stuff is what's going into it: Engine Type: rb30et Exhaust: gt3582r, 38mm wastegate, himount steampipe heatwrapped and ceramic coated manifold. Intake: JPC plenum, 880cc injectors, XF throttle body. Head: ported, wade 1147c camshaft, machined lifter blocks, crow double valve springs. Block: ACL Race main and rod bearings, hypatec pistons, moly rings, ARP head studs and rod bolts. Gearbox: r33 5 speed, 4puk brass button clutch with solid centre. Interior: standard apart from water temp, oil pressure, and boost gauges, haltech duel stage shiftlight, switches for line lockers, ecu and ign power, and isolation switch. Other Mods: 2L surge tank, twin Bosch 044 pumps, rising rate reg, remote oil filter and cooler, power steering cooler. Setup is good enough for 350rwkw on 20psi. It's just a streeter and drifter for now until I can get cage installed, then I'm going to do some hill climbs aswell.. I'll post up pics once I start getting some progress and pick up the car..

bump

dont really wanna spend over 250-300. caash is real tight. im located in colac, VIC. but will pay for postage from anywhere.

looking for a cheap 2nd hand (dont want one thats slipped before) 3 or 4 puck brass button clutch and pressure plate off one of the drifters or something to suit r31,32,33 gtst or early r32gtr with push clutch dont really have much money so looking for 2nd hand one and want to get my car going for springnats and this is the only way its going to happen. needs to handle 300-350rwkw without any slippage. let me know if you've got anything.

Toyota Supra Radiator Cooling Plate. I'm going to start getting these made up through a mate so everyone can benefit for the reduced price i can get them for compared to other brands ect. it's not a group buy, i will just get them made when they're wanted They are made out of 1mm thick stainless steel plate and are watercut for the neat and acurate cut. I drew up the design myself so isnt a copy of any other one produced. im looking at selling them for $140 delivered to your door, which is a saving of over $100 which companies sell them for. Local Pickup available from Colac, Victoria Theres a time frame of about 7-8 days from payment to recieving them. PM me if your interested with you name and address and i send you my bank details. PICTURES.

pm sent

Lost my licence for a while and cant drive it once i get my licence back anyway. As it sits, it's canaried for a couple of things like front spacers, indicator lense, brake pedal rubbers, so only small stuff. I should be able to supply with a proper RWC if needed. It has a brand new engine that has just beenm built by Johnny Dyno engines in Geelong. Made 210rwkw on drdrifts dyno with revving out due to fuel pressure problems. Now fuel problems are fixed just needs to be retuned. some details: ENGINE/DRIVELINE Top Gun 8MM Leads 3" turbo back exhaust 3" straight through muffler DRiFT Pod filter 440cc GTR injectors t04e turbo VLT exhaust manifold VLT ECU (drdrift remap) Bee*R limiter (not fitted) monza catch can (not fitted) speepati spec forward facing plenum with KA24 throttle body 600X300 front mount intercooler LOKKA diff (not fitted) JIC gold adjustable hieght/camber 8kg coilovers (front) Tein HA hieght/damper adjustable 6kg coilovers (rear) R33 GTS twin piston callipers and r33 slotted rotors (front) adjustable panhard rod Walbro 255lh intank fuel pump Boot Mounted surge tank Bosch 044 external fuel pump with upgraded 8 gauge wiring Hypertec pistons Cromeoly rings ACL race conrod and main bearings ARP rod bolts Brand new water pump JPC crow cam ( 225 duration at .50) crow cam double valve springs Ported head Full gasket and welsh plug set VLT oil pump 50mm alloy radiator (not fitted) INTERIOR Seat Covers Sports Steering Wheel AutotechnicA sports pedals Shortened gear stick with MONZA gear knob Specometer Water Temp gauge Specometer boost gauge specometer oil pressure gauge EXTERIOR 17" drifteks (8.5 front 9.5 rears) Import projector headlights with 8000k HID kit Import Afterburner Taillights Tinted Indicators TUF-031 numberplates MFX copy front lip Colour Coded mirrors Looking for about $7000-7500 but will consider all trades/swaps of interest. Contact me on: Stuart 0405 803 448

pics of setup and details of pump please :surge tank and massive pump $80

more pics of the orange supra?

pm sent

g'day, im looking for the following ASAP. VLT/rb20det injectors reply here or ring me on 0400 659 328

g'day how much less would you sell the exhaust for

NOW $250 WITHOUT TYRES

BUMP, MAKE A OFFER!!

Location: Colac, Victoria PICK UP ONLY, CAN TRAVEL UP TO 100k's Price: $500 ONO Item description: 4 16X7" ROH Azzuro rims, with some gutter rash. Have 205X45X16 tyres on them but tread is low. They are a 4 stud Multi fit with 114.3 and 100.?? PCD. Will fit R31, Cordia, Prelude..... Just fit R31 without spacers, about 38 offset i think. Contact details: Call Stuart on 0400 659 328, after 4:00pm on weekdays. or PM me PICS

BUMP NORMAL PRICE OR $1800 with stockies, no stereo, no sideskirts, stock steering wheel

BUMP

FOR SALE: Make / Model / Year: Holden Commodore VN 1990 Location: Colac Victoria Transmission type: 5sp manual Engine: 3.8 V6 213XXX k's Colour: Silver Modifications: LSD, 16" PCW rims, legal Dark blue/purple tint, Colour coded rear garnish, Top Gun 8mm leads, SAAS sports pedals, AutotecnicA steering wheel, Group A sideskirts and bonnet bulge (also have front bumper in need of repair), Sony CD player, Kenwood 6X9's, Orange calipers and hubs, and more.......... Roadworthy Certificate: no Registered: no Accident History: reversed into fence, so now has stock mismatched colour rear bumper. Asking Price: $1500 ono Contact Details:Call Stuart on 0400659328, PM or repy to thread. Other Comments: PRICE NEGOTIABLE MAY CONSIDER SWAPS