bringing back an old thread hoping for some help
Has anyone done a manual conversion on a S2? alot of the info in this thread is for series 1 stagea and wiring for the transmission is different from S1 to S2 (tiptronic)
I am assuming the same mod needs to be done for the park inhibiter switch - bridging terminals of the two pin connector, but has anyone sorted out reverse switch wiring? transmission side that is, it appears if you are using the auto harness for the manual - it will need to be cut.
I have a series 2 gearbox which has 2 switches on the side, one for reverse and the other I am not sure so if someone knows which is which that would be great too.
I did do a continuity (resistance) check of the two switches hoping to find out which one had continuity when in reverse gear, but no resistance - could be a faulty switch?
Also, under the centre console there is a little black box - deceleration sensor, it needs to be removed/disconnected to allow the console to fit correctly as it is directly beneath the coin box compartment, has anyone removed this completely or just repositioned it? Has anyone with a factory manual have this little black box? refer to picture
Any help is greatly appreciated.
Jarrad.