SomeFReaK

I pulled apart a cluster to work out how the fuel level, indicators and other warning lights work. It seems to use can-bus to communicate alot of the information to the dash, the onboard IC's then control a bunch of things. From memory speed is one (along with tach, temp, CEL, SLIP, and more). IMHO The most likely cause is probably a fault in the cluster.

I am a 190cm fatty and went with a Stradia 2 XL low max in my v35. I get much more head room (especially if i remove the cushon shown in the photo, then even a helmet is comfortable and not touching the roof). It is not as comfortable as the stock seats, the bolstering makes my hip sore on long trips If the new Z's had roughly the same space as a 350z i would get one, but sounds like i will be out of luck fitting into it

Thank you! Much appreciated!

its an s13, but it would be awesome to get it fasted: KRS13-805405 thanks in advance!

and boost controller is now sold. thanks.

ok, the ball bearing is 7mm in diameter

i will pull out the vernieer calipers when i get home and measure mine (if no one beats me to it)

Do you normally get a mobile pirtek guy or do your own measurements and take them to pirtek?

pump sold.

Price drop to $120 including express post australia wide! Make an offer if you think i am being un-reasonable price wise

Item: Walbro GSS-342 intank fuel pump Age: new Condition: never used Price: $140 including delivery (or make an offer) To Fit: Fits most nissan imports Location: Brisbane Contact: PM Comments: It is brand new and un-used (since i ended up buying a Bosch 040) and comes with: The Pump Wiring loom straight through crimp connectors 2" of efi fuel hose 2 X Hose clamps to suit fuel hose sock filter with securing clip rubber boot to protect pump pickup

BOV Sold!

Pm replied. I just noticed the BOV is missing one of the screws to mount either the plumb-back or trumpet adapter. I can get a photo if anyone is interested.

Item:Turbosmart Type 3 Blow off Valve & Turbotech manual boost controller Age: BOV is a few years old, Boost controller is new Condition: good condition Price: BOV: $150ono, Boost controller: $25 To Fit: Any turbo car Location: Brisbane, 4069 Contact: Pm Comments: First is a Turbosmart Type 3 Blow off valve. Included is both the plumb back adapter and the trumpet if you want the noise. They are easily swappable by un-doing a few screws. Also included is a brand new stainless steel weld on adapter for your intercooler piping. Its in great condition, minus a few scratches on the blue top part. I am looking for $150 for it, but i will consider offers. Second item is a Turbotech boost controller. Its brand new and un-used. I purchased it before i got my skyline, and its got a EBC already, so i dont need it. It cost me $37.50 delivered. I will sell it for $25 delivered anywhere in australia.

i could be very wrong, but i heard he is now working for RACQ. Big loss, they were an excellent small business. I took my old car there, and i would have taken the skyline there too.

www.checkitout.com.au doesn't come up with a response for that VIN, so i am guessing its never been registered? A trip to either the police or your local transport department will be needed to find out if its on any stolen vehicle registers.

thanks guys!

can some please fast ecr33113145 for me? Thanks for any help!

got mine today, and its got the hole in it. I am happy with the quality, now i just gotta fit it.

CAASQ Round 6 to be held at Autobarn MacGregor on the 15th of September. Address:1/583-587 Kessels Road MacGregor (opposite JB Hifi, just down from QLD Transport) Time: 2pm-9pm. Sign up 1pm. Cost (SQ): Novice: $20 Amateur/Pro Street/Show: $35 DbDrags will also be run, this could be your last chance to get your system on the meter before Brisbane Autosalon!

i managed to get some this arvo, thanks.

Hi All, I am looking for a oil pressure sender to suit an rb20det and also the single wire coolant sensor. If anyone can help i would appreciate it. I am hoping to have both by the end of this week. thanks!

thanks, its more than i could get out of the copy of fast i have

Any information on this one? PS13-068039 thanks

Hi, I have an Rb20det which i will be fitting into a car soon, i was wondering what maintenance people recommend i do? It has new spitfire coil packs, and has had the timing belt done (although i am going to check it and replace it again if it doesn't look new...). I am going to change the oil filter, and fresh oil and coolant will be used. Is it worthwhile changing the head gasket since it will be a trivial task while the engine is not in a car? Anything i might have overlooked? thanks for any help!