FineLine

NFI Zeb, I have never been interested enough in 20's to look in to it.

It will probably have more than that lag slag you built.

ERD are currently building a ballsnall rb20 that is going to have the in house vcam setup. An rb20 with some low down grunt pehjaps. Whoda thunk it.

So you're puttin a single on it....Good move.

What he said. And dont bother with o/s valves, Just tidy up the ports and bowls, I am using the supertech valvetrain with o.s valves cut back to near standard, With the 37/88 on a 30 bottom end you will give nothing away to any twin setup in terms of response and low down grunt. Just do it, you wont regret it. they can shove the twin turbo goatf**k where the sun dont shine.

Heard that misso, It is very common with skylines. I dont think I have seen them the same yet.

what you should do is get the right offset wheels. Failing that you can buy hubcentric spacers.

we really do, Its important we have sonething to laugh at.

so that will be 8.45 wedge time.

Habib is the biz, what time tonight for das dinner.

nfi

Well, the chair is on blocks in readiness for g/box removal and habib is over at Scotts rods getting the chinese junk wastegate replaced and replumbed with a tial. If either of them are ready in time I might go do some model (ing)

Models Ya say, hmmmmmmm......strokes beard.

Is it possible to put a heavier demarcation line between posts. This is like trying to read a wall of text. Why the change, You know us old dream boats hate it.

Thats cool Brenton, Pleased to hear you do actually take the time to make your own, I have no doubt its a time consuming task. I would really like someone to show me back to back comparisons of one of the needle sharp jobs as opposed to the more agricultural finish of the ones in question. I personally dont think the difference would be all that noticeable given the direction of the gas flow.

So you are saying no! you havnt used one of these so you cant make a true comparison, My "assumption" was correct, thank you for acknowledging that. And no again, used sump oil wont do the job but these manifolds do. Very very happy with mine. :thumbsup LOL

So you have owned and used both the cheap chinese s/s manifold and one of these and can offer an opinion from experience. NO? Well I can. This manifold works, It doesnt crack or break or buckle or twist or warp, It simply directs exhaust gas through the turbo and does it quite well with zero problems. I have no issue reccomending this product to those on a budget build simply because its a hassle free mod. Have you ever thought about the flow of an exhaust manifold, If the gas was flowing in the opposite direction the collector precision would mean so much more, As it is 6 pipes feed in to a merge and blow through the turbo, do you think cylinder no.5 is going to produce less gas pressure because no. 1 has a better collector weld. I dont. Its a pressurised system fed by all 6 doing the same thing, It aint rocket science The big names use the pre fabbed collector for one reason only, Its a whole lot easier than cutting and welding one of their own. Keep piss moaning about the product and I'll just keep driving my car with this inferior product That works.

certainly is Paul.

Cryo treatment is relatively inexpensive Mitch, somewhere around the 300 dllar mark for the complete internals from memory. The expensive bit is obviously stripping and rebuilding the box along with new bearings and sychros as common sense would dictate.

Yes, both gervaise and I had our box's cryo treated at Dans insistence. both car make over 400 kw's and both get dragged and circuit driven and have done for 3 years with zero gearbox issues. Does it work, How do you prove it. You can only disprove it by breaking the box and that has not happenned to date so I'm going with a resounding yes! It does work.

You have an air conditioned desk...What will they think of next.

Cams license not required Melly.

Looking looking looking

It was indeed, we saw pwned and looked over the whole joint and couldnt find you.

Settle down Kev, Noone is accusing you of bs. Its simply good practice to have the items in your possession before you offer them for sale. Anything can happen between you winning the bid and recieving the goods and that can only harm your good trader rating even if it isnt your fault. Anyhoos, gl with the sale.