
yld34t
Members-
Posts
163 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Events
Gallery
Media Demo
Store
Everything posted by yld34t
-
THANKYOU VERY MUCH FOR YOUR INFO DECIM8 - IT BASICALLY ANSWERS ALL MY QUESTIONS! I WILL LOOK INTO PURCHASING ONE OF THE ABOVEMENTIONED COOLERS. I REALLY DIDN'T WANT TO GO ANYWHERE NEAR THE CHINESE CRAP! ANY IDEAS AS TO WHERE I WOULD BUY A HKS COOLER FROM?
-
I have an R34 GTT which I do a lot of SuperSprints in and the oil temp (off the standard gauge) regularly reaches 130+ degrees - I slow down then!!. I have searched for answers to my questions on these forums but haven't been able to find them, so I am hoping you guys can help me out. What is a good, reliable (no leaks!) brand of oil cooler to use on my GTT that doesn't cost the earth? I would also like to retain my factory oil temp gauge. Is this possible with an aftermarket oil cooler kit? Remote filter relocation doesn't bother me but I'm not sure whether all the kits have this feature or not? Any advice is greatly appreciated, as I would like for my engine to survive! Thanks.
-
I am after 2 front plastic inner gaurd liners for my R34 GTT Any help appreciated. I am located in Wollongong but can travel to Sydney to pick up. You tell me a price! Phone Toby on 0409 903 669.
-
Hi, I am after a complete set of standard suspension to suit my R34 GTT series 1. Any help appreciated. Feel free to call me on 0409 903 669 or PM me. Thanks guys, Toby. I am located in Wollongong, but will happily drive to Sydney or pay for postage.
-
I would REALLY like to get one for my R34 GTT series 1 with standard front bar. Am I too late?? Please let me know! Thanks mate!
-
I use a Nismo thermostat in my R34 GTT which does a lot of Supersprints. It made a big difference on the track to keep temps down and I have no problems around town either. Go for it, you won't be disappointed!
-
Sard 550cc Injectors
yld34t replied to yld34t's topic in For Sale (Private Car Parts and Accessories)
PRICE DROP TO $600!!!! C'mon guys these are cheap and need to be sold........ -
I have been told I need to buy injectors for my R34 NEO engine that have a WIDE CONICAL SPRAY PATTERN, to suit to oval inlet port of the NEO engine (as per standard injectors). Has anyone else heard of this? I was wondering where I might find injectors like this to buy? I am after 480cc upwards to support around 250rwkw. Would the NISMO 480cc top feed injectors be suitable? Please help! Thanks guys.
-
Sard 550cc Injectors
yld34t replied to yld34t's topic in For Sale (Private Car Parts and Accessories)
Photos as promised. Someone with an R33 GTS-T must want some 550cc side feed injectors!!! Offers anyone?? -
Sard 550cc Injectors
yld34t replied to yld34t's topic in For Sale (Private Car Parts and Accessories)
Alloy collars now SOLD!!! Injectors still available. I will put photos up later. These injectors MUST GO, so I can buy the correct ones for my car. Open to offers........these are cheap for brand new injectors!! -
Hi, I was wondering if TOP FEED RB26 injectors are the same as TOP FEED RB25 injectors I need for my NEO engine? Also, I have heard of people using Bosch injectors instead of Nismo or Sard injectors. Where do you source Bosch injectors? Thanks for your help.
-
I have 6 SIDE FEED Sard 550cc injectors for an RB25. They have the red plastic top and the number on the top of each injector is 195500-2240. They are brand new, unused with all o-rings. Reason for sale is I need top feed injectors and foolishly bought the wrong ones! Can also supply machined alloy collars I purchased of Croyden Racing to bolt them into a side feed rail. Price: $650 delivered for injectors and $150 for the alloy collars. I will send the collars with the injectors if they are purchased together. These are the prices I paid (have receipt for collars). I just want my money back so I can buy the correct injectors! Any questions please call Toby on 0405 776 191. Please make sure you have SIDE FEED injectors and NOT TOP FEED ones before purchasing, so you don't make the same mistake as me!!!
-
R33 Bride Seat Rail
yld34t replied to yld34t's topic in For Sale (Private Car Parts and Accessories)
Item SOLD Thanks. -
R33 Bride Seat Rail
yld34t replied to yld34t's topic in For Sale (Private Car Parts and Accessories)
Sorry guys, I stuffed up attaching to other photos!!...... -
I have a drivers side genuine Bride seat rail I removed off a reclinable Recaro seat. To suit: R32 / 33 / A31 Cefiro In perfect condition, pictures attached Price $180 ono Item located in Wollongong, but can be brought up to Sydney (Botany - if required) or can be posted at buyers expense. Measurements for mounting to the seat are: Width - 29cm Length - 33cm. NOTE, measurements taken from the centre of the bolt holes, 3 of which are elongated for ease of installation. Reason for sale is I have an R34 GTT and need the correct rails to suit my car! PM me or contact me (Toby) on 0405 776 191. Thanks.
-
I am after a recaro/bride drivers side seat rail for my R34 GTT, to suit the recaro seat I just bought. I have a bride rail to suit R32/33/A31 to swap, if desired. Part no. on the bride rail is N103SL. It is in perfect condition. I can be contacted on 0405 776 191. Thanks.
-
Hi, I was wondering if fitting the FRONT ONLY Brembo calipers and rotors off an R33 GTR to my R34 GTT is worthwhile for the money, bearing in mind I use 17 inch wheels with semi-slicks on the track? Will they provide a substantial increase in braking performance, or should I be looking at purchasing a complete front and rear set? Any advice appreciated. Thanks.
-
R33 Gt-r Brembo's Full Set
yld34t replied to Brockas's topic in For Sale (Private Car Parts and Accessories)
Hi mate, do you still have the Brembo's? If so, could you please put up some pics? Thanks. -
Sard 550cc Sidefeed Injectors (brand New)
yld34t replied to humz's topic in For Sale (Private Car Parts and Accessories)
Hi mate, any photos available and do you know how much power they will safely support? Thanks. -
Brake Pads Users Ratings Guide
yld34t replied to Snowman's topic in Suspension, braking, tyres and drivetrain
Hi guys, I currently use QFM Track Day pads front and rear in my R34 GTT which I use for Supersprints. I think they are rated to 650 degrees. These pads work extremely well - no fade lap after lap and work from dead cold so good for street too. I got them from Goran at Brakewest in Victoria. He is a good bloke who is very willing to give out advice - his prices are very reasonable too. I highly recommend the best brake fluid you can afford ( I use Lucas Grand Prix 600, boiling point of 300 degrees), braided lines and a master cylinder stopper bracket. PS I tried EBC Greens and they were absolute garbage. They didn't work very well and actually crumbled apart after 2 track days! Beware! -
I have an R34 GTT with the following mods: Turbo back exhaust, front mount, pod filter with cold air pipe, Apexi Power FC, Greedy EBC, silicon intake pipe to turbo. The injectors, fuel pump and turbo are all STANDARD!. The car has been tuned to 12psi and made 210kw ATW. My problem is that boost falls off to around 10psi from 5 - 5500rpm to redline. I have tried adjusting the gain on the EBC, with no luck. My tuner seems to think the standard turbo is the problem. Has anyone else experienced this? I definately have no inlet or exhaust restrictions. Any advise greatly appreciated!!
-
I am looking to buy a drivers seat rail to suit a BRIDE FIXED BACK ZETA seat for my R34 GTT. I do not need the side mounts, as they came with the seat! Any help appreciated. I am in the Wollongong area, but will travel to pick up around the Sydney area. Thanks.
-
Hi, I am after a fixed back racing seat with runners to bolt into my R34 GT-T. Anything considered. I am located in Wollongong, but travel to Sydney everyday. Thanks!
-
I am after a set of four (4) 235/45/17 semi slicks of any brand - do not have to be street legal tyres as they are for Super Sprinting! Preferably with 60% plus tread left. I can pick up from the Sydney/Wollongong area. Any help is greatly appreciated! Thanks.
-
I have a set of 4 Nankang 245/45/17 tyres I would like to get rid of. 3 are approx 80% tread, the other 1 has a scuffed inside edge with the rest of the tyre at 80%. Looking for $200 the lot. I can deliver them to Sydney, or pick up in Wollongong. Thanks.