yokotas13

lol the exhaust did what it was supposed to if you laughed

they were already sold 1500USD

eh, i can never make up my mind

maybe it was an OKinawa car....

or use better oil?

they are deff skyline wheels the centercaps givet hat away

yeah, ill have yall a video in a few weeks and i actually do drift

the masa are what +20mm front correct? An 18x9 +10 will fit perfect with slight camber or +20 with near 0* camber the rear is where you will have to do a little work. Just borrow a baseball bat, heat the fender with a heat gun, put the bat between the wheel and the rear fender, and roll the car back and forth...it works like a charm and as long as you heat it, wont mess up your paint or borrow or buy a fender roller like i did (i bought one, 200USD shipped from the states to me in japan) I know i whore my pictures alot but that is an 18x9 -5 offset on stock slightly rolled fenders

no i mean people putting +35 wheels on stageas is horrible If your gonna spend the 2,000 on wheels get ones that fit 18x9 +20 fits really well all around with a small roll make it look nice is waht im saying

No lsd...i found that out going up a driveway today If you find some driveshafts that bolt in possibly that are slightly longer, or get your shafts extended it might work Lift kit? Get some custom coilovers with long shockbodies.....and lift away dont forget front adn rear camber arms as well as toe arms your tension rods would no longer be adequate either

if you do get hte 18x9 +20s or +25 anythign else will bring shame to an LMGT4 on another car. but yes, they will fit

drill a hole at the bottom of it problem solved i got my wheels on today, tried to lower it..and yeah, i fuxored my exhaust up, gotta redo the under bend for the subframe, i didnt notice i had it like 4 inches too low lol...

its boredome im waiting ot get my new turbo in once that happens i can order all my pipe for intercooler pipes and exhaust i want to order it all at once to save on shipping i found a place for 5.00 a foot for mild steel pipes will be using a flowmaster muffler with two lone tips out the back

OK you can drift an automatic Stagea with the front shaft taken out its crappy becuase its like an open diff or something, but it happens I make an entire o2 housing back exhaust i need to redo the part that goes under the subframe becuase i ran out of time and used a prebent section from an R32 exhaust...so ill do that next week or something im still waiting on my tranny to get here

then save up

the skyline and cefiro guys are running 9 and 10 inch wide wheels in australia......

bleh more people falling into the mundane 8wide 30 offset wheels

you asked what the biggest wheel was you misled me i hate you

um thats not large its gonna be sunken like stock wheel type offset almost

fiberglass is as strong as you make it ALways when i get a kit i reinforce all parts Lay a few layers of glass at the mounting mounts, anywhere there is a 90* angle. Also in the front bottom lip, i lay 10-15 layers on the whole thing, as well as backfill it with resin to make it solid.

forgot to add if you go lower than 18x9 +0 you will need to heavily roll your front fenders as well. i put a slight roll on mine, but it has too much camber, which is why i went with an 18x9 +20 all around so i can just space the rear a little bit. this is what it looks like with an 18x9 +0 18x0 +20

um depends on how much massaging you want to do I had 18x9 +0 front 18x10 +20 if you get an 18x10 +10 it will clear with almost 0* camber, but you need a alrge fender roll qhich i didnt want to do However if you go with 18x9 +10 or +5 it will sit almost the same ( a few MM difference) with 20+MM more interior room so you wont hit your coilovers like i did on the front you can afford to go with 10s +10 or so as long as they clear brakes if you have tension rods ...but id reccomend a PS cooler if your going to...as 10s put a huge strain on your PS system For the rear two arms are a must Toe Arm and camber arm if you can get the other one (traction i think its called....i dunno) then get it Use all S14 model arms, you can find them for 90-150 each arm depending on where you look.....

yessir im int eh US air force