R31Heaven

Ok let us get closer to the problem, is a squealing,whining, taping or clicking niose:D

probably wrong words to use I meant how acurate are they. sorry all:rolleyes:

Just a quicky what are VDO boost guages like do they have spike problems as I run a Ceramic Turbo and the last thing I want is fins comming out of my exhuast..:burnout:

Dont think it would be any good in security doors being made out of light Aluminum;) make a crims life easy. Gumby sounds like the place to go, a group of guys need to all put in and get a sheet, way cheaper than buying it from places like Autobarn or Supercheap. And also it would save on postage from me..

It is good quality and is rigid if you hold it by one end it does not bow.

Here are some picys of what I got so gives an idea of size...

Measured the offcut and it was 400 X 400 and as said it was a piece laying around so got it cheap (very Cheap. I know if I got 4 X 400 X400 peice it would only cost $24 and measure the same or more than a complete sheet) The fifty dollar piece is 1.2 meters by 900 which is probably a little big for most people. Anyway get back to you all on Thursday after I actualy go to them and see what they have, I dont believe anyone anymore until I see and have the goods in my posetion...

Dont know what postage would cost for somthing that size,could be a bitch. Will work it all out on Thursday might need to cut down to usable size.

Got a price for anyone, small mesh 1200 X 900 $50 a sheet larger mesh 2400 X 1200 $230 a sheet. they do cut to size

I have a piece of fine stuff at home at the moment what size do you need its about 300 X300 can have it for $4 plus postage I will take a picy of it.

I will do a check this thursday at what they have and prices on the mesh, I will see what sizes they have also, dont know about the leathter though:D

I bought mine from a metal fabrication company, its called expanded Aluminum mesh cost me $6 for a 500 X 500 off cut and it is the fine stuff. I was stoked! from autobarn they wanted $48 for a 500 by 200 piece can stick that were it fits. If you get into a bind and cant find any, let me know and I will see what I can do..

I bought mine from a metal fabrication company, its called expanded Aluminum mesh cost me $6 for a 500 X 500 off cut and it is the fine stuff. I was stoked! from autobarn they wanted $48 for a 500 by 200 piece can stick that were it fits. If you get into a bind and cant find any, let me know and I will see what I can do..

When I rang them I told them that Unique offerd me $650 so they dropped it to $600 and as inark says you can pay monthly, it does ad to the cost though. When asked about mods they had no problems as long as they were legal.

Hey inark rang them today and they are going to insure me for $600 not bad on my GTS.

Nope !! I have a short bit of hose going from the actuator to the Compressor no controller. I just bought a MBC to put in there as it had nothing, now I gather I have one. How does it work???? I gather the factory one would be a fixed unit only runs 7lb:(

Merli here is an over view of my engine bay

The boost sensor is here and at the moment the internal wastgate is opened by the turbo vaccum

Some one said it could be a boost controller, yeah I will agree with anyone at the moment, if so were does the hose to no were go and 2 how is it managed should there be some sort of electronic adjuster????? grasping at straws here:looney:

In the image above (I gather you can see it) I have placed and oval line around and item I have found mounted on my strut tower and wish to know what it is, but I gather by your comments GR33DyMANGO you cant see it mmmm:(

The one with the oval line around it. the circle is the disconected hose.. you can see the image???

Can anyone tell me what this is! it has a disconected hose at one end blocked up with a bolt and connects to a Vaccum line at the other....

Sorry I missed it but my Clutch would have not stood up to it and I ended up spending the money on my car when I bid on Ebay and got myself a boost controller so couldnt even spectate. How did all the R31 Guys go?

Bo0sT_JuNkY I am going with a clutch that is on its last legs, I wont be doing any startling times, but what the hell it is the fun of it. I have another car My Nephew wants to run his VLt, its half Nissan anyway

Hey Ash wh o bought your car??? Oh and also you wont have to worry about her reading this cos I going to tell her what you wrote;)