-GTHR32-

Selling a heap of parts from my rb20 as i am upgrading to rb25 engine/gearbox Garrett 25/40 turbo (rebuilt by Mr Turbo $1480 have receipt) with highmount manifold, external wastegate w/ screamer (all braided lines incl.) including Z32 afm and custom 3inch dump pipe. Running on car for approximately 4 months, everything pretty much brand new, car and parts have not had a hard life. $1800 Forward facing chrome plenum with larger throttle body (not sure what size,a few scratches on plenum but would buff out quite easily) $200 All intercooler piping and hoses required to match up plenum and highmount to intercooler if buyer purchases plenum and turbo setup together $0 Splitfire coilpacks $300 Sard 800 injectors with ballast resistor box $500 HKS Cams (not sure on specifics), on idle sounded very ballsy and brought car up thru the rev range $600 OS Giken camgears $200 Cometic Headgasket $100 ARP Headstuds $100 1992 R32 Gearbox with HD Xtreme clutch $400 PWR kelvar timing belt $100 Microtech LT8 Ecu $250 Standard Ecu with Nistune $150 With all mods car made a safe 242.05 rwkw @ 16psi with Nistune (Tuned by Autech) Will ad other items and photos once engine conversion is done later tonight. My Name is Adam and my contact phone number is 0401813921 Located in Parkwood but can drop off thru the week to some SEQ areas depending on my work schedule Feel free to ask any questions. Some prices negotiable.

someone called me thursday while i ws in hospital regarding sale of injectors, could they call be back please , 0401 813 921

someone called me thursday while i ws in hospital regarding sale of injectors, could they call be back please , 0401 813 921

Bought 6 X sard 800cc injectors from a SAU trader under the impression that these were to suit rb20 (due to the im pedence difference between the 20 and 26). They were listed seperate to the 25 and 26 injectors that were also getting sold but have the impedence required for GTR. Trader wont consider swap for lesser item of rb20 impedence Its not possible for me to set up resistor as i have a lowerback injury and am not going to pay workshop to do such a straight forward and simple job I would swap for any rb20 injectors 650cc-800cc X6 even if it is at a loss dollar wise to me would even take swap for used injectors that are in vgc cond $800 call Adam on 0401 813 921 as i dont get on here much anymore located in labrador qld

Bought 6 X sard 800cc injectors from a SAU trader under the impression that these were to suit rb20 (due to the im pedence difference between the 20 and 26). They were listed seperate to the 25 and 26 injectors that were also getting sold but have the impedence required for GTR. Trader wont consider swap for lesser item of rb20 impedence Its not possible for me to set up resistor as i have a lowerback injury and am not going to pay workshop to do such a straight forward and simple job I would swap for any rb20 injectors 650cc-800cc X6 even if it is at a loss dollar wise to me would even take swap for used injectors that are in vgc cond $800 call 0401 813 921 as i dont get on here much anymore located in labrador qld

f**king jerks, i had mine stolen from arundel 3 months after my brothers impul was stolen from southport back in late 07, atleast you and i got ours back unlike my little bro who didnt have any insurance, get some details on the culprits pm me and ill happily come along with some of the boys for some fair justice, im not what people call a keyboard warrior i just didnt get a chance of any vengence on the oxygen theives who stole mine due to lazy police work and wouldnt mind taking it out on someone who truly deserves it, glad you got i back anyway champ

located in labrador Adam 0401 813 921

sorry what i ment would anyone be able to be able to do it at my house in labrador, will pay $$

upgraded a few parts so i have these parts for sale, no pics as yet but will post them asap stock rb20 manual ecu $50- selling as i bought the mines ecu mines tuned ecu for rb20, cheap upgrade from the factory ecu, plugs into factory loom. mines factory seal on ecu not broken $300. (removes fuel and speed limiters, increases rev range 400 rpm. suited for basic mods (higher boost, exhuast, pod etc)- selling as i bought microtech malpassi fuel reg w/ guage $80- selling as i bought sard 2 x 12 inch subwoofer boxes $20 each or 2 for $40, covered in black foss, good condition- selling as i am fabricating my own other parts including complete stock turbo and manifold and stock plenum for sale when i remove them from my car- both in good condition

i just purchased a hks 2530 turbo with highmount manifold and wastegate, hks cams and cam gears, custom plenum and mircotech ecu which has been tuned for these mods at 255 rear wheel kw running 16 psi, was curious if gtr injectors would be able to feed enough fuel to this and what size fuel pump and fuel pressure reg would best match these mods. exhaust and fmic have been done aswell not sure if these parts will flow enough but- i do have a walbro pump and a bosch pump which is huge and noisy (could be worn but always been loud) compared to the walbro but not sure what size or anything i do have a malpassi fuel reg which is shit apparently and a sard which seems small in comparison to the malpassi also what sort of price would i be looking at for the cams installed if i supply the a new timing belt and head gasket (just labour in other words) thanks

if i can get a driver ill attend

until there is enough suitable venues that are convenient for "HOONS" and enthusiasts to do what they enjoy then this will keep happening on the street pissing people off, and giving them something to whinge about. I say let them whinge, let them carry on until they build something its just gunna get worse and worse for them, some off the unlucky will be caught but majority will get away with it and keep filling the neighbourhood with smoke and there ears with tyres screeching. I think you would be dreaming thinking that they will build a suitable venue, some old bat will get on his or her high horse and shut it down before its built screaming that its going to affect there glaucoma or prosthetic hip or there will be some other bullshit excuse from some local councillor who has had the same old bat in there overpaid ear........ but ive been wrong once before.

thanks ive passed on your details if he hasnt rang you already

could somebody give me some details of someone who deals in selling GTR half cuts or wanting to sell an rb26 with g/box, as much useful info would be appriciated, closer to chirnside park the better, thanks

i havent got any pics sorry but there is a myspace page with some pics ill send to you. I cant fault his work personally, his MR2 was one of the nicer jobs ive seen around

ill be moving to mackay in february when i get my licence back for work and football. much happening up there in the way of the car scene and other random shenanigans?

i strongly recommend Mark from SHARPTRIM, located in molendinar, phone number is 0424175355. high quality trimmer specialising in marine and automotive re-trims and repairs, i will send u some pics of my seats when there done after AFL grand final weekend. He will give you plenty of options for you depending on your budget etc. Tell him Adam sent you

how was the power fc changed to run rb20? interested in buying

still available is it?

ebay link to ute

Here is a video we took as they were closing the doors to the mustang cruise boat company last year. we thought we should atleast take advantage of a bad situation while getting paid for it hahaha. its a pity not everyday working day could be like this enjoy skid video

A friend of mine isnt interested in goin to summer field dayze. 2 tix at $85 each if anyone is interested. pm me or call 0401 813 921

yeah thanks that would be great. Chain them to the back of the car and drag them with it, make sure you take the unsealed roads, and maybe try and get atleast one of the limbs to come under the car (atleast 1) please My brother will make sure your over compensated for your troubles

yeah we still go out looking for parts off his car but luckily for them we havent come across them, hope this may give you some inspiration or some ideas with yours impul parts included (non standard) -Impul full exhaust -Impul 206kw tuned ecu -intercooler -impul tuned cusco suspension- coil overs, strut brace, sway bars -injector (not sure impul) -turbosmart boost controller -recaro suede racing impul seats front and rear - impul bodykit w/ customised f/bar -17 inch impul rims -impul tuned stage 2 shift kit transmission -HKS airfilter -stainless steel airbox nefinately forgot some things

Has anyone seen these parts going around or car that could be the same, this wasnt a common car ( geniune garage impul, 1 of 4 in oz at the time) i know its been awhile but it sometimes it takes time for these sorta things to surface??? pm me details if so any feedback will be appriciated and a reward for any useful information thankyou