ROBB33

You have PM.

Second plug is only for auto transmission models mate. May be time for a new TPS.

Mate, Busso is Falcodore country. Tyrepower and Ian Diffen in the metro areas have experience with a wide range of vehicles. This is not the case in my neck of the woods. I would much prefer to use a workshop with experience seting up Skylines. Thanks to every one for their input. Cheers. ROBB.

Just completed fitting new suspension setup to my R33. Coilovers, bars, adj rods, bushes etc. Anybody aware of a competent tyre/alignment workshop in Bunbury who could set it all up properly? Any help is much appreciated. Cheers. ROBB

Fill 'till it starts running out the filler hole mate. This will ensure the exact amount. Just make sure you can get the filler bung undone before you dump the old oil mate, otherwise you'll be stuck!

4.1 litres if completely drained. However, it is difficult to achieve a complete drain. Between 3.8 and 4 litres is pretty normal.

Thanks mate. Much appreciated!

Yes Rob ,they are the same.

I have been told that R33 ball joints are hard to find and pedders want to charge me $90 each ! However, another mob by the name of Veale have no listing for R33, only R32 for $30 each. Anyone know if R33 and R32 ball joints are interchangable? Cheers.

Howdy all. Just wondering where I might be able to source some dust boots for my LCA ball joints. Don't really fancy forking out for new joints as they are fine but the boots are RS. Anybody know? Cheers.

Have damaged 3 of the 4 LCA ball joint boots on my R33 when removing the arms to fit new nolathane bushes. Does anyone know if these are available as a genuine or possibly aftermarket item. If so where from as my local auto shops, as usual are no help when it comes to imported vehicles. Thanks.

This concerns a R33 GTST. Need to know if I can use my 550 degree c hi- temp paint to spray my exhaust or, will I need the 1500 deg c sh!t? Cheers

Thanks mate.

Wondering if anybody knows which way the front strut tops are supposed to be mounted on an R33 ? They are slightly wedge shaped so they canbe mounted two ways. This will affect the angle of the strut its self. So my question is; Should the arrow on the strut top (standard R33) be pointing forwards or backwards? Cheers.

I have my R33 up on chassis stands replacing the suspension and bushes. Decided to start it up today as it hasnt been run in a while. Fired up no probs, but the wheels start turning. The thing's in Nuetral!! Whats going on? dis-engage the clutch and they stop as if it were in gear. Anyone know whats happening? Cheers.

www.kudosmotorsport.com.au sell them for $200. Theese are the cheapest I've been able to find but are still way over priced IMO.