33_skyline

does Ray Hall tune cars aswell if you live in Cairns

Just thought I would add for the soccer fans Feb 11th 2009 is a Japan VS Australia World Cup qulifier match

One of the guys at worked picked up $5 flights for the end of the month to Japan All up he paid about $350 return for me it is just over $400 return, looks like I might be going to Japan for a holdiday

I noticed this aswell when i couldn't get onto SAUQLD, so I will pm you here hopefully you get it I now need a Bosch 044 fuel pump. my walbro died after 5 laps of the Staduim Drift so I missed most of the day.

Ring a brake and clutch place and ask if they can make Throttle Cables or know a business in the area that can. You could even try a few machanics I had to get one made for my RB25det.

Try this 41.547412, -87.642495

Happy Birthday Joe

The side skirts are Edge (that is what the company I purchased the kit off call them) They are basically similar to the 400r side skirts except the hang a little lower to be more inline with the front bar Yes the skirts are still available. PS: sorry for the late reply

bump

bUMP

I had the same problem on an R33 S2. (I assume same fuel rail) Swap the O-rings with the factory injector O-rings. Once the O-rings are on you will notice a lip above the bottom O-ring (middle injector - purple top) You can sort of see it in this picture attached. You need to trim this lip back a little, a set of side cutter pliers will do. The injectors should then fit, you do also need the blitz injector collers (which you said you bought). Then you have the injector caps (hold the injector into the fuel rail) they have a little rubber piece underneath that you pull out and then sits snug on top of the injector They should sit the same as the stock injectors so shouldn't have a problem with clearance on the plenum top is back on If you have anymore questions just ask. There is also a pic of the injectors installed in my car.

My fav

What the difference between a Toothpick and NSW Origin Team At least a Toothpick has 2 points

Just use the K&N cleaner the oil will slowly disapear and you won't notice it. I have a blue filter as well and use K&N filter cleaner. The Black stuff over the rear bar is because it is running rich. Turbo cars generally run rich to stop detenation which is bad. Just wash it off.

This would be my favourite

As Viet boi said that is the Do-Luck front bar, PSI Parts stock them The side look like Edge skirts, hang a little lower then the 400r ones. Can be purchased through DMD, and I also happen to have a set for sale. See my signature for the link if you decide to do it youself. Unsure of the rear bar though.

I've got a HSV Y series Clubsport - auto - 89000 stock with all factory options apart from a sun roof... Black metallic paint, black leather immaculate condition, am willing to swap with the difference being paid my way give me a yell back if your interested, will negotiate further depending on your response Just PM 33_skyline and he will let me know. Cheers Chris

Trial Style rear bar pic attached. I have a full kit for sale if interested http://www.skylinesaustralia.com/forums/Sa...33-t165288.html

Here Mine A Catch can is now near the washer bottle not pod filter and has braided line. and slowly replacing other lines with braided (fuel etc)

Service Manual Here is the link to the R34 Manual it is 204 pages and 18mb to download

BUMP

I also have the greddy plenum, If you are after a Q45 throttle body contact Throtle Bodies Australia just make sure you state that they have the same TPS as SR20 (can anyone confirm this) He makes custom billet throttle bodies, MAKE SURE YOU SPECIFY EVERYTHING AND THAT HE KNOW WHAT A Q45 THROTTLE BODY IS this will eliminate the hassle that I went through. I didn't state the type of TPS and had a little trouble finding the universal TPS that they say they use. It cost $550 delivered from memory but that was a while ago

Front Bar Reo?? is it the same for Series 2

PM Sent

Bump