silvio

i didn't think it would be a problem but wanted to make sure

i have blocked these to water pipes off from going round the back of the block to the turbos because i'm using a single turbo setup and using the water jacket from the block and the water pipe from the front to feed the turbo but am just thinking if i should connect it to the water pipe at the front for coolant flow in the intake manifold ?????

i have blocked these to water pipes off from going round the back of the block to the turbos because i'm using a single turbo setup and using the water jacket from the block and the water pipe from the front to feed the turbo but am just thinking if i should connect it to the water pipe at the front for coolant flow in the intake manifold ?????

as above correct me if i'm wrong but i think rb20 rb25 and rb26 altinators and powersteering pumps are the same i also need the timming belt retaining plate that goes between harmonic balancer and crankshaft timming gear

as above i have a rb26 and i'm pritty sure the other rb engines use the same backing plates

turbo down to $300

pistons/rods sold

cooler sold

i'm in central qld it hasn't been registered no aus vin number just the jap one

got some bits and pieces to get rid of i can organise postage or the buyer can if they get a cheaper rate 1 big turbo off a tractor of some sort a bit big for my plans but someone else might have some fun with it $500 ono 450mm x 300mm x 75mm hybrid intercooler never been used chineese i think $50 r32 rb26 conrods with pistons $50 r32 rb26 standard cams $20 r32 rb26 standard exhaust manifolds $20 clutch pedal off s13 i think the bolts were too short for mine dont know what happened there but can be modded $20 brake pedal off s13 $20 drivers side elec window assy $30 drivers side door handle $20 passneger side mirror $30 air orbital sander $30 sony cdx-ca730X $10

got some bits and pieces to get rid of i can organise postage or the buyer can if they get a cheaper rate 1 big turbo off a tractor of some sort a bit big for my plans but someone else might have some fun with it $500 ono 450mm x 300mm x 75mm hybrid intercooler never been used chineese i think $50 r32 rb26 conrods with pistons $50 r32 rb26 standard cams $20 r32 rb26 standard exhaust manifolds $20 clutch pedal off s13 i think the bolts were too short for mine dont know what happened there but can be modded $20 brake pedal off s13 $20 drivers side elec window assy $30 drivers side door handle $20 passneger side mirror $30 air orbital sander $30 sony cdx-ca730X $10

hi mate i got some r32 stock ones look to be ok $50 plus postage if ya like

any rules that could help me out?

LOL yer wish it was that easy i looked every were its like some one half tried to comply it cos its got the side intrusion bars but just no paper work and no green plate no wonder it was cheap

ok so i bought this 180 shell a while back and been planning a bit of a project but i realised it's got no green plate and was wondering if i can still get one with a rb26 in her i'd like to register it

i plan on ordering a clutch online just wondering which one fits i plan on buying a lightened flywheel with the kit as well

thanx mate i guess its not the quick fix i was hoping for ill see if i can hunt down a rb26 harness

thats the prob i dont have the 26 harness the block i got was fairly bare but it still has most of the sensors still on it i plan on running a haltec or similar with map sensor ecu i dont really wanna pay for a after market harness that why i was hoping the rb20 harness works

"bump"

thanx ill pm ya

hi i need the bottom timming belt cover please

as above but do i need to fabricate a gbox crossmember or is there a straight fit ?

anyone know if the sensors are different they seam the same

in the middle of doin a rb26 into r32 gts-t and wondering if i can use the rb20 wiring harness ill be running an after market computer with map sensor so the duel air flow sensors wont be a problem all the other sensor plugs look the same but just want to be sure