partyboy73

Check the post date dude

I have a stock one...

If you still need one I'll have a good one for ya in 2 weeks... $35 delivered

Does it need to be R33..? I have a complete setup for R32.. except for calipers I have a whole rear cradle, so every nut and bolt you need, I have. Mike

I have a complete setup from an R32 skyline... from the handbrake and even the bracket it bolts to (cut out of wreck) to the cables, backing plates, shoes and discs... What were you looking at paying? I'm in Adelaide.. Mike

Damn! been lookin for a relocator for ages... if sale falls through let me know, I'll pick up the slack

Forgot to mention to PM me if you can as it would make life easier... thanks

Looking for the factory, plastic (or even aftermarket metal?) sump guard for an R32 GTST... also keen on cast 90 deg. elbow to fit my HKS 2530 to my RB20 and an adjustable actuator would be handy... let me know what ya got guys cheers Mike

Think I sent you a PM a while back, but not sure... Have a RB20/25 HKS cast low mount... let me know if interested Mike

Wake up people, this is available in 1 LTR (close enough) and 4 LTR (ish) and just recently two members were selling this NEW, one had 4 LTR bottle for $100 and one had 4 x 1 LTR bottles for $100... $80 for used is FOOLISH. People post their thoughts on these things because this forum is about exchanging ideas, experiences and opinions as much as it is for exchanging car parts... glad you got it sold buddy, as unprecidented as it was, but dont knock people for thinking out loud... my 2.2 cents (GST Incl.)

LOL... are you serious? this is as funny as that guy that was tryin to sell a used Nismo head gasket!! keep it up bud, the world needs humour..

Check the date on the original post dude.... lol

For some reason I cant work out how to post in sections... used to have a "new topic" tab, but its gone... anyway I'm looking for the plastic factory splash tray that sits under the sump for an R32... anyone? Hope this gets thru.... Mike

You mean the other way around dont you...? 345mm front 355mm rear

According to Regency its 345mm front and 355mm rear from arch to hub centre... bastards dont let ya have any fun!!

Can anyone give me a heads up on what combo of swaybar stiffness would be best for GTST....? I'm guessing stiffer front than back but then my problem is... how stiff are the stock GTR rear ones? (25mm hollow) since thats what I'm fitting... Ultimately what I need to know is what best matches the GTR stock rear bar... any constructive feedback would be appreciated

I have passenger side one... what you lookin at payin? Mike

Generally a Master Key is a key that will open all the same locks, like the lockers at high school, they were all the same type of key used but with different codes... the Master Key opens all of them. This then begs the question A: What do you want with an R34GTT Master Key? and B: Who would have one other than Nissan and its repair centres...? Odd and dodgy sounding request...

Yep, 10ohm 10 watt... I hav'nt done it yet but was thinkin that I might be able to make up a pack by having one common 'in' and 6 'outs' since the power wires branch off fron one wire... I'll sus it out when I come to it... apparently it has been done with much success and I dont see why it would'nt work since all you are wanting to achieve is dropping the ohms by 10...

Was looking to do this myself and after some research I found that you could just buy 6 x 10ohm 10w resistors from jaycar (or equivalent) and splice them in just as you would with the GTR pack... worth looking into since it only costs $10 and they're brand new Mike

Thanks guys, just shows how gullable I can be at times.. lol.. thought it sounded too good but wanted to be 100%.. got HKS 2530 to put on, along with S/S split front dump and high flow to compliment the front mount.. Lookin for 200 - 230+ RWKW's.. its still my daily hence the 370's... Got them for $10 each, $22 each for clean, flow test, seals & pintles then $10 for 6 x 10 Ohm 10W resistors to be wired in and finally just need to get plugs to fit injectors as mine wont... I like playing with cars so dont consider it a hassle and the total cost is decent.. will do some searches, cheers

Was on the way to doing this but then found out that the stock RB20 injectors (270cc) are good for up to 280kw so now I'm wondering if its worth puttin in the CA18 injectors (370cc)....? Input would be much appreciated Mike

Check out ebay dude, theres a custom one on there in NSW... its up to $300 with 18hrs left Mike

I have a brand new copy one... what price range you lookin at?