whiteboy01

$100?

Low ball of $100 abit sus of the dent =S

Follow the pipe and it connect to it =) How much for the pipe and plastic bit?

Follow the pipe and it connect to it =) How much for the pipe and plastic bit?

Still got these 2?

G'day I need the pipe that comes off the "twin turbo" pipe and the plastic bit that joins it. Do you still have it? Thanks PS Heres a pic of what i need.

As above? The piping?

Intercooler piping. Straight from the twin turbo pipe to the intercooler. 2 pipes and plastic joiner please!

Sure does! The engine comes out a late model R32 (1993) It has been comfirmed to be a R33 RB26 and gearbox. Discovered when I went to buy a clutch that was installed by Hyperdrive.

Hey, I have 1 x RB26 complete block and sump for sale just missing the head. ATMO the block has been striped down to the bare block but all bearings, rods, cradle and sump is all there. I had a piston failure on piston number 5. Instead of rebuilding the RB26 i decided to go down the RB30 route. I'm willing to separate the rods or sump if someone wants them.... $500 ono for the lot. Willing to take any offers i need this GONE! Name: Mitchell Hanstrum Location: Perth Phone Number: 0400210338 Email: [email protected] let me know!

Interested send me a PM!

Hi Guys/Gals I'm in need of some oil and water lines that go from the turbo and bolt up to the current steel lines. Long story short I sold the old turbos and didn't take the lines off. If any body has any left over from a single conversion or double up please let me know. Thanks PS Here is a small picture of what i need.

Turbos sold pending payment - cheers mblak Still got the block and crank - NEED IT GONE make a offer!

BUMP CRAZY PRICE! $250 FOR R32 TURBOS! $500 FOR BLOCK CRANK AND OTHER PARTS STILL HERE!

Cheers - I had a look around and couldn't work out a price. NEW PRICE $700 Can take it to Perth for Free!

Still sitting here! Any good offer taken!

Open to any price - want this stuff gone!

Item: R33 RB26 bottom Age: 16years Condition: Scored bore Price: $1200ono To Fit: Skyline Location: Geraldton/Perth Contact: PM/Phone 0400210338 Comments: 5th Piston is marked and scored the bore. Can be bored out. Item: R32 GTR Turbos Age: 16years Condition: Very good no shaft play Price: $350ono To Fit: Skyline Location: Geraldton/Perth Contact: PM/Phone 0400210338 Comments: No shaft play - recently brought off Andrew from HyperDrive MS. Selling due to "upgrade" to a RB30. Pictures on request. If you have any questions dont be heistant to call me any time or leave a msg and I will get back to you.

Do you have a picture of the dump pipes? Are they better following then the R32 one? Are the O2 sensors still working? Any pictures?

So the fuel rail just has to sit higher? Thats it? The injecters that I looked at are top feed as well.

Ok i'm interested in these injecters. I have read the whole thread but most of it relates to the rb25 fuel rail. Now what do I have to do to make these fit? 23MM spacer with a longer bolt and longer fuel hose? Just so the fuel rail sits abit higher up?

G day What is need to fit these to a GTR fuel rail? Just some spacers? Cheers

Nope - keep your old ones in and swap them at the tuners. It's fairly easy thing to do.

Sorry - yes i'm ordering the pistons 0.20 over size and getting the machinist to match up. Thanks

RIPS do put some magic to there engines I know but i'm going to the same lengths. Cheers. I'm going to get the pistons bored out from standard to 0.20 tho over size and will order the pistons to suit. I won't be guessing at all. Cheers. I'm hours away from drop the block off to the machinist now.