XKLABA

yes and no i put in a relay with 15gauge wire and fuse but used old wire as trigger, only problem with this set up is the pump runs at 100% all the time, not sure how else to do it.

thank you you made me feel a bit better about putting it in

i was told they were similar price and performace but the bosch is very noicey, not good when police pull you over and there is a loud buzzing coming from the back of the car.

I am trying to bet my 11.36 on stock turbos while leaving engine as stock as possible to see what i can get out of it.

the old pump was the original pump that is now 17 years and 180000+km old, i took car for another run and is blowing smoke again

The idea behind these were because at 19psi the stock injectors are maxed so for a bit of safety i am going to turn up base fuel pressure a couple of pound, so i don't have to get new injectors for this engine as it is a bandaid engine while i get the next engine ready which is going to run a different style of injector

pm sent

i have a genuine one with lower lip gunmetal gray in good condition only minor scatchs $750

street car, replacement twins are the go they look stock and can go up to 500rwkw, personal i would go t517zs have seen them make 350rwkw at 1.4 bar with 256cams and near stock response.

Yeah just waiting for sard fpr to get here from japan them on the dyno it goes.

Are they really that bad, do you have flow rates for gtr fuel pump to compare them and do you have any experience personaly with a walbro pump in a gtr. Cheers Michael

yeah sorry about that western sydney, moutt druitt area

I have just fitted wallbro into my GTR on advise from a motorsport shop that does tuning aswell as sell parts, now i'm not sure if it was a good idea as i took car for drive after doing change and is no longer blowing black smoke under boost, any thoughts would be appriciated. Cheers Michael

Yes, i forgot to get them in the photo, they are perfect condition

hks bov $400 for both with join pipe or $200 per bov without join pipe apex'i filters suit 65mm afms $150 r32 boot lid with n1 lip $200 Cheers Michael

Pics and price drop, $1100 $200 cheers Michael

to bad the lip is blue and not red. cause there a nice rim and red would suit my car

The boot lid is sold, i got it a few weeks ago

i only got it started last weekend after rebuilding it in my garden shed and am trying to run in, if i can get the wallbro in and get it on the dyno to check tune after not using for 2 1/2 years and putting thiner head gasket on i will for sure, work permitting

After 2 1/2 years of my GTR sitting in the shed with a craked piston while i got married, had a son and brought a house,i finaly got the time and money to pull it out and rebuild it at which time i had a closer look at the turbos and they appear to be stock, i checked the part numbers by googleing them which gave me a page on sau which had the part numbers listed as stock and after a chat with John from unique autosports he suggested they might have steel wheels and should put a magnet on them if it stick they are steel if not then they are stock, when i did that the magnet did not stick to the wheel but it did stick to the housing though the soot, which i would have to asume they are genuinely stock turbos doing 290rwkw, [email protected]

any idea on how much it would be to frieght sydney (2759) cheers Michael

pic of sard fpr if still for sale