sickr33

pm sent

keen on hks hard pipe kit please post price and pic's

you sure you wont post ???

pm sent

still got this?

the reason for the coolant passing around the throttle body's is to stop them freezing solid think about it Japan is so dam cold. but in Australia you shouldn't have a problem and it had been proven that you can gain power by bypassing the throttle body/s. its easy i did it in my r33 gtst just find the entry and exit points either side of the throttle body/s and join them together. i used a length of 6mm copper pipe. i will be doing the same with my R32 gtr when i get a chance!!!! WARNING!!!! Although you can get power gains there are some side affects you must know before doing this mod. there is a chance that you throttle body/s may freeze in position on a cold night. if this ever happens it is a very scary experience as the car will keep accelerating even after you take your foot off the throttle!!!! the easiest way to get out of this situation is to stab the throttle to the floor and then back off again. this breaks the throttle body free of any ice and will return to normal. the only other side affect is that the car cold start function will take longer meaning the car will idle high for a bit longer than usual and it takes longer for the cold start valve the heat up as it no longer have coolant flowing through it. hope this helps.

sorry forgot to say its an R32 gtr

put a rb25 neo turbo with screamer pipe on my mates r32 good upgrade bit more lag but stronger in the top end 50mins to take old turbo off 1hour 10mins to put the new one on

i need a stock or very quite exhaust asap borrow or buy don't care please ring/text me 0433708054 or pm please help i hate the look of the sticker on my baby

any one else

im thinking of selling my gt2560-5 turbos come with stainless manifolds and dumps one manifold cracked but had it welded up so all good now. also comes with HKS adjustable actuators from memory they only 10-15000km old i have the recipe for purchase and install with the km's of car in the paper work to prove it (filed away some were) only ever run 16psi and have no shaft play at all looking to go big single on new motor so what would be a fair price????

Southside engine center are golden perfectionists with a reasonable price they did all the machining and balancing on my motor and now my dad is going to get his done there too. Best person to speak to i Neil part owner. even came over my house after work when we had a few problems with the build. A++++++! South side 93171233

putting in my new r32 please close

all sold please close

back up for the weekend feel free to call me on 0433708054 cheers Ryan

back up for the weekend feel free to call me on 0433708054 cheers Ryan

if you in Perth and it is for gtr i am very interested in a swap

hahaha yer the car is about 3 hours of work away from being drivable but then it will go into a strict run in period and no i wont be driving to work

still here

turbo kit still here

sorry i mean the bore is 86.5mm

bump

motor is about to go in my r32 gtr motor specs so far BOTTOM END ARIAS pistons Eagle rods New stock crank (balanced) Stock block bored to 26.5mm King bearings N1 oil pump Tomei sump baffles Tomei oil restrictor HEAD Fully rebuilt (new guides, valves, shims) Tomei pon cams 260/9.15 crack tested 15 hours of port polish ATM have GT2860-5 turbos looking to upgrade to a T04z what i want know is has any one made 600hp@wheels RELIABLY with a set up similar to this???????? car is going to be driven every day kindly with a thrash ever now and then. can it be done or has it been done cheers

DIFF SOLD