ezekiel10

The clutch fan sounds like its gone.. thats what happened to me. I thought it was to noisy after it was warmed up and yeah was the fan

Hey, I had to replace mine not long ago.. and this where i got mine from and had no problems. http://www.kudosmotorsports.com/catalog/pr...?products_id=60

Check behind the pedal where the rod goes through the firewall and into the master cylinder and make sure theres nothin leaking.. if there is then the master cylinder is gone... And or look at the slave cylinder and same thing.. see if theres any leakage...

yeah i bought the kit.... exedy one to suit rb20det? so yeah it must be faulty..

Well ive now replaced the slave cylinder... and the master cylinder.... changed different rod sizes and all... so it must be the clucth? oh and the throwout bearing i had in the was different to the origional so i changed that back but yeah still no luck.. guess ill have to get the clucth back out

wich way would you adjust the master cylinder rod... in... or out?

Slave cylinder, Spring behind the pedal??

I did replace the throwout bearing.. but evan if that was wrong wouldnt changing the rod overide that problem?.. The pressure plate was the same...

Hey, The other day I installed a new Exedy Heavy Duty clutch into my Nissan Skyline R32 GTS-T. I got it all back together and noticed the clutch didnt feel right, evan thow I bleed the clutch. So I took it for a quick drive, because I thought it would just be the new clutch but I got someone else to have a look and they said its not disengaging properly. Now, The clutch wont disengage at all... i've tried a new slave cylinder, that didnt work... so then I put a longer rod in... that didnt work... What else could it be ?

Hey, just wondering, is the VL clutch slave cylinder the same as the Nissan Skyline R32 GTS-T slave cylinder? Thanks

Yeah " NRV155" same with mine when its cold, but yeah ill get on to changing the bushes and hopefully thats it. Thanks

Hey, I've noticed lately that on my drivers side when driving i get this " creeking noise " ? i dont know if its my suspenion or yeah, ive heard that it could be the upper control arm bushes. Im not sure but id like to get rid of it quick. Thanks heaps.

breaker bar, crank it over and it will loosen itself on the chassis rail... thats how i did mine

Hey, Do you have the indicators ? and do you reackon they would fit a Nissan Skyline 1992 GTS-T model.. Or can you get some pics for me? Thanx heaps Oh and how much if so..

Has anyone used it yet? and put it on a dyno ?