mic_check_1_2

roof liner $50 interior carpet $50 windscreen wipers (set) $30 dual gauge holder pillar mount (came off new shell a bit dodgy) $30 r33 gtr front mount intercooler (damaged, no leaks etc, just a few dents) $50 seatbelts (whole lot) $70 centre console $30 handbrake $30 SOLD kick panels $20 each ashtray $10 indicator stalk $10 stereo surround $30 SOLD rear reo SOLD steering coloumn with ignition $80 (no key, but i can get one made up if you like) 2 front KYB shocks damper adjust (good condition) $50 2 genuine nissan jacks $15 each dash $60 sun visors $20 the pair parecel shelf $10 boss kit $40 nearly all interior trims - throw me an offer rear stock spoiler (great condition) $100 glovebox $30 rear vision mirror $10 door seals $30 a/c unit control $20 SOLD fuel filter $20 purge fuel tank (dont no if thats the correct name) $20 coolant overflow bottle $20 washer bottle $20 castor rods $75 firm the pair (one with aftermarket bush, one stock bush) floor mats $30 the lot (drivers one not in pic but i do have it) passenger door trim $40 rear seats $60 (good condition just a bit dirty no rips or tears) stock gear and handbrake boots $10 each or $15 a pair(bit worn SEE PIC) HKS 60mm boost gauge with holder $80 (2nd hand but i never used it, went defi!! been told it needs 2 new bulbs) stock camber arms $80 ono 5 x 4 Stud rims 15inch white face polished dish, with 4 brand new tyres pics (see pic) $300 ono do not know offset (these came off a nissan gazelle) NO A/C VENTS!! i do have few other things that i probably cant remember so just ask and ill check best way is to PM me, will post but prefer pickup, if you need pics just ask thanks

can some1 fast my car vin: 6U9000HCR32042618

hey just browsing through things on ebay and came across and ASI Performance Radiator, anyone have one? or know about them?? just wondering thats all thanks josh

anyone?? i see rb25's n 26's but no 20's

PICS NOW UP! over the weekend dropped shell over the motor MOTOR NOW IN , mounted gearbox, connected tailshaft, fitted exhaust, put afm, pod and intake piping on, hooked up ecu and a few other electrics, stripped my old shell bare and fiddled around with other things today put my driver door on connected castor rods, swaybar, front upper controller arms and put my front shocks in and some other minor things CHECK BACK FOR UPDATES!! AND MORE PICS

i bought a shell,which came with a boss kit but i want to put my normal steering wheel back on, im having a major problem gettin it off, it looks like that all nuts and bolts are off but it still isnt coming..please help me before i break something thanks

ok, def gunna clean up wires and smooth evrything over.. dont no whether to polish or paint covers yet, but would still like see ppls engine bays!!

tryed doing a search for detailed 32 bays but cant find any, after the dust is settled and my cars finished im going to spruce up the engine bay (braided lines, different color silicon hose, polishing) would like to see what sum ppl haf done to there rb20 engine bays so i can get some ideas thanks

iv got pics on my camera but i cant find the chord but ill keep searching

be able to tell me where is the a/c condensor or compressor?

hey everyone, rebuilding the car and iv just put the motor back in the car and i cant seem to find a line, its to do with the aircon i think.. iv attached a picture and its circled of whats missing, its not the one thats circled its the one underneath, as its the only picture i haf available it should be on the engine somewhere, just cant find it, if anyone can tell me a place to look..would be great!!! thanks

dont part with it, that car is awesome!!!

hey everyone, read about 90% of this thread, but still having troubles gettin my head around oils and fluids, so i was wondering if anyone can help me out as im going down to autobarn later today to get evrything, i drive an rb20det r32 1993 done just 120,000 clicks, i use the car the putt around in but i do give it some every now and then and plans for hitting the track in the future as well, so far im swinging towards this Diff - Motul Gear300 75w-90w Gearbox - Motul Gear300 75w-90w Engine - Motul Xcess8100 5w-40w Coolant - Castrol Anti Freeze Brake Fluid - HAVE NO IDEA...HELP Power Steering - HAVE NO IDEA EITHER i think thats all the fluids/oils i need but if ive missed one could sum1 please point it out, be much appreciated!!! and also could people tell me the amount i need eg. 2 litres for diff thanks

hey everyone, going to use dot 4 brake fluid, just wondering if dot 4 will be fine for the clutch seeing that clutch and brake fluid are the same.. thanks

agree and agree

hey everyone, been a member here for a short time and havent really introduced myself, so id thought ill do it now,my names josh and i drive a gunmetal 1993 r32 rb20det manual, recently had an accident (hit a pothole which spun me out cudnt gain control in time) ran up a gutter and smashed my passenger side into a tree the shell/chasis were pretty much beyond repairable,the whole running gear worked fine and still turned ova no worries so i had to source a new shell took me me a week to get my hands on 1, so this is where the rebuild starts.... 14th of july: got a car trailer went and picked up my shell got it for $1100 from abc wreckers in oxley reason i got it cheap was because the guy didnt want the shell he wanted the motor out of it cuz he had plans of puttin it in a mitsubishi pajero i dropped the shell off at my girlfreinds uncles place (got a big workshop there) then went and picked up my car and brung it over as well. We first started taking out intercooler, radiator disconnecting lines anything that would get in the way of gettin the mottor out, we then disconnected the tail shaft from the diff then from the gearbox, unplugged most of the electrics, while me and a mate were working on all of this, my girlfreinds uncle was cutting the radiator support off the new shell (it was bent to the sh*thouse) and that summed up the first day 15th of july: started ripping off panels, seats, heaps of little bits and piece,disconnected my exhaust (not a single scratch on it from the accident and then dropped the motor and gearbox and front suspension out and wheeled the old shell back, another day over 21st of july: jacked the rear end of my old shell up, took out my fuel tank and hooked it up to my new shell, we then dropped my rear subframe out and assessed the damage (snapped tie rod, snapped upper controller arm, bent camber arm and split my diff ) and called it a day 22nd of july: went to "all automotive import parts" at seventeen mile rocks TOP PEOPLE I HIGHLY RECCOMEND THEM and picked up the parts i needed, except diff as i couldnt afford it atm and camber arms as im going to go aftermarket. went out to my car, and slapped on these parts, decided not to put the subframe up yet as it wud b alot easier to put the diff in. from there we fiddled around on bits and pieces and then fnished for that day 25th of july: few parts that i bought over the net were starting to arrive (camber arms and so on) so it was go ahead with the subframe, went down to all automotive picked up my diff went out to my car put the diff and camber arms on and bolted my subframe up!! 28th of july: got my radiator support off my old shell and welded it on to my new shell, fiddled around on a few other things, assesed damage on my front suspension and motor etc. (just needed a new fan shroud, castor rod, and lower controller arm) went down to all automotive again to pick up the LAST parts lol, 29th of july: started transferring things from my old engine bay into my new one (power steering resovoir and so on) hooked clutch pedal up (PAIN IN THE ASS!!!!!) replaced my lower controller arm, dragged my old shell out of the way, so we are ready to drop the new shell over my engine ....... SORRY I HAVENT TAKEN ANY PROGRESS PICS BUT I WILL START TOMORO CHECK BACK FOR MORE UPDATES ON THE PROGRESS

nice work, where from? what did it come with?

so is this turning into a braided brake and clutch line buy?? how much for both delivered, very interested

A1 nissan and Nissan Wrecking, they have shells but for a clean straight one with no panels just the shell, your looking at around 2k - 2.5k and the downfalls are is the losers there will try to be know it alls and try to give you lectures about "if your a drifter dont waste my time, dont you trust my judgement ....blah blah blah" i told him to get stuffed and not waste my time.... 2 - 3 weeks ago zoom imports had an r32 gtr shell for $1500 but not in very good condition, but easy fixable the thing to do is call up any nissan wrecking / import wrecking, anything as you will find one eventually took me a week to find one (constant phone calls) i ended up picking one up for $1100 few repairs needed but dont lose faith..... THERE OUT THERE!!

i took a car for an inspection at repco (not the shop the mechanic part lol) i told them to be very thorough, he coudlnt staple the all the paper together afterwards because he found that much wrong with it, lol

interested in swapping for a laptop HP DV4000 worth about same

hey ill take the rear pods if there still available, cud you pm me your price n bank account details

wtb: r32 gtst roll cage condition: dont care as long as theres no kinks dents etc. location: brisbane price: pm me extra info: would like all plates and bolts included please!! contact: pm me if no-one has any could someone at least point me in the right direction of where to look for one thanks

WTB: Pair of rear coilovers for r32 gtst Condition: Good, No knocks or leaks and so on, Price: PM ME Location: prefer brisbane so pickup..... but i dont mind thanks

location? whoops sorry i see now