M I K E

would love to see pics of the 19x10's please?

he has coilovers, from memory teins? there isn't much room between the strut and the wheel so you'd have to run a 19x9.5+20ish at the highest i'd imagine. you'll have to run a 245/35/19 also. you will not be able to run them without lipping your rear gaurds. and for what it's worth, coilovers are generally thicker than the standard shock setup as they need to run the thread for the collars around the outside of the shock. dependant on your height youl'l also lose inner clearance if you are too low as the spring and it's seat will sit below the top edge of the wheel (assuming your coilovers aren't base height adjustable)

my mate has some jap meshies stich gulf 17 x 8 + 7 17 x 9 +15 5x114.3

exactly the reason i'm going manual soon

this might help a little http://www.skylinesaustralia.com/forums/Dv...mp;hl=head+unit

who'd you source the consol through? i've been looking everywhere for an s2 manual one that is

have you seen the exchange rate at the moment though :S

need to see pics, of the plenum in particular. who made it?

.. but in all seriousness pm BooDah, pete is wrecking an s1 - i reckon the washer bottle is still good

dude you have got to be f**king kidding, right? who said this isn't neo and had the cover plate removed to fit the aftermarket cooler piping? 10k?

i got a pm from him that said they were sold

pm BooDah, he has a set of tein coilovers for sale in adelaide

how much are these things worth though? like what would people be willing to pay for one of these group buy things that are being mentioned? i wouldn't mind one either

i don't think they are genuine time attacks, kyle look the part though, got any side on/whole car shots?

i might also add (shameless plug ) that i've got some wheels that were on my stagea in the link below vvvvvvvvvvvvvv (lol) will take any reasonable offer somewhere nearish 900-1000

you're on the money, dave. how a rim sits is dependent on both width and offset. offset is measured in mm as a distance from the centre line of the wheel to the mounting plane. the higher the offset the further in the wheel will sit. if anyone has offset specific questions feel free to pm me and i'll answer them for you

yes, they will fit. for what it's worth they will sit ~30mm in from the edge of a GTR wheel and have ~10mm more inner clearance. i'll reserve my opinion on the actual wheel specs though..

check the parts section, there is a set of brand new 18x10+20 GT-C's for sale, don't clear r33/34 gtr brembos but might just clear r32gtr

who ever told you they won't fit has been telling you fibs the outside egde of the wheel will sit 1mm further out than mine, so PERFECT (in my eyes anyway haha) and if you are worried about inner clearance, this stag was up on the auctions at one stage, has 18x10+20 meisters all round and is 'just' and rs4 food for thought anyway

it begins! sell me your manual stuff oh and those eyelids keep at it bud, it'll be worth it excuse my ignorance/stagea noob-ness still, but do they come with brembos? i'd assume yes? if not (or if you are willing to run a small spacer) there are some brank spanking GTC's in the for sale section, 18x10+20 all round from memory

looks the goods! def needs to come down though is it just me or do they have a slight blue-ish green tinge to them?

i'm not sure what suspension you're running but if you want height adjustable coilovers PM pete ( BooDah ) - he's selling a set of teins

haha nah, the high beams are attached to the main headlight units behind the grille, remove the grill as per this guide as it only sits in front of the high beam units (not bolted to them - might have a couple of push in type clips.. can't remember). don't need to remove the highbeam units to remove the front bar

was +20 up front i think to 'fill' the front guards dave, put some pics up once you get the wheels on

yep, pretty much exactly the same. you'll be able to tell if you've missed something.. the front bar won't come off!