antz31

Is it in good working order?

That should have been microtech x6. Also motec is giving 'no ref' error.

Just get a michotech x6. $200 delivered. Take you about an hour with a soldering iron and some heat shrink.

Hi guys my rb20 has just started to backfire and die when it gets hot. it runs fine for a while at running temp but after probably 30 mins it pops, backfires and dies. i can restart it a couple of times, it will run for a few seconds then the same thing, then it wont start at all until it cools down (30mins). Its running motec and no afm. Had the car for more than 5 years, never had this problem. Have just replaced the igniter with a motech x6 to rule that out. Im thinking possibly cas next? Seems like it must be something temperature sensitive...

well as instructed, i bled the master cylinder, and then bled the slave, and believe it or not, it works.

The bearing is the smaller diameter one, as supplied with the kit. I have bleed the slave well but not the master. have not adjusted the master at all. The fluid was all drained out. What adjustment needs to be done at the pedal? The slave is fine, its been in use for maybe 2 months before the clutch was changed.

So i have just put a osg twin plate in my rb20 coupe and after bleeding it it seems like the slave cylinder piston needs to come out another 10mm to push on the fork because at the moment its not returning the pedal at all and when the pedal is at the floor, the slave cylinder piston in just in contact with the fork. If i jam a spacer eg screwdriver between the fork and the slave then i get some travel in the fork. The slave is brand new, and i used what i think is the correct throw out bearing. I have not made any adjustment to the master cylinder, however prior to changing the clutch it seemed to be working fine. Any ideas would be much appreciated. Cheers, Antz

hey mate you have that clutch out yet?

yeah call fred at lennok spares in woden, he knows all about nissan

thickness of clutch plates?

stock gtsr wheels? any pics? what sort of tyres?

i can put rego on it. Its yours for $500 bucks plus rego. look its old and got a few k's on it but for that kinda dollars you can complain. If your interested in having a look shoot me a pm.

yeah i have a s3 r31 wagon auto you can have for not a whole lot of coin.

hey mate thanks for the offer, but i have to do it at home, when i put on the 5 stud front hubs it wont be driving anywhere until i get a full set of wheels. hope that makes sense. But offer is much appreciated. Maybe we can organize something in the new year to test fit them, but it would need to be at my place thats all. Cheers Antz

that would be ideal, but getting my hands on any gtr wheels to test fit is rather difficult.