skytemplar

hi Shane, will you post to Brisbane? how much is for the wing? cheers

I'm finding an air conditioning compressor for my ECR33 ie. 93 R33 GTST S1. My pump isn't working anymore as I can't find any pressure coming out from the out pipe. I bought one from wrecker, but it was a newer type than mine. All hose sockets are different with my car's. The model I need is: brand: Zexel part number: 1102 type: DKV 14D cheers. more cheers if anyone will sell it!!

Mine is manual. I need only the small piece around the key. Also, Do you have the plastic piece which the passenger window switch is attached to? I need only the small plastic piece since mine is broken and the switch is not firmly staying on the handle. How much will these cost? cheers.

Hi Steven, do you have this piece of keyhole cover? I'm from brisbane, hope if you are here i can come and pick up.

Hi Sean, Is this a series 1? If so, do you have the plastic key hole cover as below? (Or if you know it'll fit a series 1)

I have an after market Momo steering wheel and appear the same HICAS problem as the above. I've recently done wheel alignment so this shouldn't be an issue - however my steering wheel is sometimes off the center (sometimes better and sometimes worse). What can cause this problem?

check your relay first - motor doesn't fail easily. have a look to this: http://www.skylinesaustralia.com/forums/t170188.html hope helps cheers Tim

i'm having the same problem. where is the sunload sensor located? i've only found the inside sensor as descripted by rod. i've no idea if it's working not. how can you check the readings from them and if the sensors are working? thanks.

Hey Dav, I had a similar problem to your with engine's rpm fluctuating in idle and it stalls easily on low speed. However my ECR33 didn't suffer misfire. I took it to service and the mechanics told me the fuel injector was dirty and almost blocked. In your case, you may also want to check this out. Gd luck with your car Tim

Problem solved..

I have a problem with my driver side window. It is stuck in half way when I tried to close the window. My problem is very similar to this one: http://www.skylinesaustralia.com/forums/in...howtopic=170188 Now I've taken off the trim and testing with the switch. So far it seems working as I see no losen solder joint and there is a tick sound with I press the button. But when attempting to check the window regulator, I found it is too complicated to remove and fear the glass may fall out if I unscrew the motor. Has anyone a suggestion how I can take the motor out for test/fix?

hi there, do you have a window regulator (motor)? I'm after this stuff as i have the same trouble as this guy: http://www.skylinesaustralia.com/forums/in...0&hl=Window

Nice work showing pics for all parts Do you have window regulator (motor) and switch for R33 S1? I'm having a problem as this guy: http://www.skylinesaustralia.com/forums/in...0&hl=Window I guess I need to change the regulator as the switch looked alright to me.

hi slip please check pm

will you want to sell your starter motor separately? I need one shortly as mine is dying, want to have one for spare. How much is it if you want to sell? I live in brisbane too, so pickup is possible.

Hi I had this problem since i bought my R33 - the electric socket of car applications (eg. lighter) never worked. After I read how people open up the panel to install audio system, I found it unplugged and fixed it. However, a while later of using a car charger, I loosen it and it went short circuit with a light noise, like a bang, then socket failed. So I opened up the panel again and try to figure where the fuse is, but i found it no where. does anyone here know the location of the fuse box or something? thanks btw, my spark/starter is about to die as told, because everytime i start my car the engine gives a cracking noise. is it possible to take it out and rinse it / repair?